GOVERNMENT OF PAKISTAN

MINISTRY OF FINANCE, ECONOMIC AFFAIRS, STATISTICS AND REVENUE (REVENUE DIVISION)

***

Islamabad, the 1st July, 2006.

NOTIFICATION

(CUSTOMS)

S.R.O. 693 (I)/2006.- In exercise of the powers conferred by sub-section (5) of section 18 of the Customs Act, 1969 (IV of 1969), the Federal Government is pleased to levy additional customs- duty on the import of goods:

  1. at the rate of 11% of the customs value on goods classifiable under tariff headings of the First Schedule to the Customs Act, 1969, as specified in Appendix I to this notification:

[Omitted]

  1. at the rates specified in column (4) of the Table below on the sub-components and components, specified in Appendix I and Appendix II as mentioned in column (3) of the said Table, imported as part of any kit form for the assembly or manufacturing of motor cars and vehicles classifiable under headings mentioned in column (2) of that Table, namely:-

 

TABLE

 

Sr. No.

 

(1)

Description of vehicle

 

(2)

Appendix

 

(3)

Rate of additional customs-duty

(4)

1.

Agricultural Tractors of PCT heading 87.01

Appendix II

35% ad val.

"15% ad val. for existing manufacturers of Agricultural Tractors, new entrants in Tractor manufacturing for manufacturing of new and old make and models of Agricultural Tractors, regardless of HP. "20

15% ad val. for new make or model as certified by EDB for two years from the date of issuance of manufacturing certificate or up to the 30th June, 2024, whichever is earlier

2.

Road Tractors for semi-trailers (Prime Movers) less than 260 kW of PCT heading 87.01

Appendix II

31% ad val.

3.

Road tractors for Semi-trailers (Prime Movers) of 260 kW and above of PCT heading 87.01

Appendix II

31% ad val.

4.

Buses (dedicated LNG/LPG or CNG) of PCT heading 87.02

Appendix II

35% ad val.

5.

Buses (other than mentioned at Sr. No. 4 above) of PCT heading 87.02

Appendix II

31% ad val.

6.

17Vehicles of PCT heading 87.03 (excluding 4-Stroke auto rickshaw of PCT heading 8703.2115 and Electric

Rickshaw of PCT heading 8703.8030)

Appendix I

16% ad val.

 

7.

4-Stroke auto rickshaw of PCT heading 8703.2115

Appendix I

31% ad val.

17but 15% ad val. for new make or new model exceeding 200cc as certified by EDB for two years from the date of issuance of manufacturing certificate or up to the 30th June, 2024, whichever is earlier.

177a.

Electric auto Rickshaw of PCT Heading 8703.8030

Appendix I

31% ad val.”

8.

Vehicles of g.v.w. not exceeding 5 tons of PCT heading 87.04 (except 3-Wheeler cargo loader of PCT heading 8704.3150)

Appendix I

26% ad val.

 

9.

 

3-Wheeler cargo loader of PCT heading 8704.3150

 

Appendix I

 

31% ad val.

10.

Vehicles of g.v.w. exceeding 5 tons of PCT heading 87.04

Appendix II

26% ad val.

11.

Vehicles of PCT heading 87.11 (except motorcycle rickshaw of PCT heading 8711.3020)

Appendix I

31% ad val.

17but 15% ad val. for new make or new model exceeding 125cc as certified by EDB for two years from the date of issuance of manufacturing certificate or up to the 30th June, 2024,

whichever is earlier

12.

Motorcycle rickshaw of PCT heading 8711.3020

Appendix I

31% ad val.

17but 15% ad val. for new make or new model exceeding 200cc as certified by EDB for two years from the date of issuance of manufacturing certificate or up to the 30th June, 2024,

whichever is earlier.

 

Provided that in line with Auto Industry Investment Policy (AIIP) of the Auto Industry Development Programme (AIDP) approved by the Economic Coordination Committee (ECC) of the Cabinet in Case No.ECC-168/13/2007 dated 13.11.2007, the additional customs-duty leviable under this notification shall not be charged on sub- components and components, imported in any kit form by an assembler or manufacturer declared to be a new entrant till the 30th June, 2016 by the Engineering Development Board (EDB) for the vehicles specified in the said Table for a period of three years from the start of assembly or manufacturing of respective vehicles, subject to following conditions, namely:-

 

  1. the new entrant assembler or manufacturers shall chalk out a plan for progressive manufacturing of the vehicles spreading over a maximum period of three years within which he shall catch up with the localization or indigenization level of respective vehicles, as approved by Auto Industry Development Committee (AIDC) of the EDB;
  2. the continued non-levy of said additional customs-duty shall be contingent upon the achievement of progressive annual indigenization as determined by AIDC of the EDB. In case of any material deviation by the new entrant, the AIDC shall determine the stoppage or withdrawal of the incentive of non-levy of said additional customs-duty, allowed as such, retrospectively;
  3. the new entrant shall abide by all the terms and conditions laid down in the separate notifications issued by the Ministry of Industries and FBR for assembly or manufacturing of the said vehicles under Auto Industry Development Programme (AIDP) and Tariff Based System (TBS);

 

  1. the additional customs duty shall be levied on the sub-components and components which become indigenized by the New Entrant assembler or manufacturers, in accordance with the said plan for progressive manufacturing; and
  2. the term ‘new entrant’ shall bear the same meaning as declared or notified by the Ministry of Industries.

 

Provided further that in line with the new entrant policy for motorcycle manufacturing industry with new technology notified by Ministry of Industries and Production vide Notification No. 4-1/2013/LED-II-(Vol-III), dated the 26thSeptember, 2013, the additional customs-duty leviable under this notification shall not be charged on sub- components and components, imported in any kit form by a new entrant assembler or manufacturer, for assembly or manufacturing of motorcycles classified under PCT heading 87.11 specified in the said TABLE, for a period of five years from the start of assembly or manufacturing with new technology subject to the following conditions, namely:-

 

  1. the new entrant assembler or manufacturer shall achieve the annual localization or indigenization targets

/ levels in accordance with the localization plan spreading over a maximum period of five years, duly approved by Ministry of Industries and Production;

  1. the additional customs-duty shall be levied on the sub-components and components which become localized / indigenized by the new entrant assembler or manufacturer, in accordance with the said localization plan;
  2. the new entrant shall abide by all the terms and conditions laid down in separate notifications issued by the Ministry of Industries and FBR for assembly or manufacturing of motorcycles; and
  3. the expressions ‘new technology’ and ‘new entrant’ shall bear the same meaning as declared or notified by the Ministry of Industries and Production in respect of Motorcycle Manufacturing Industry.

 

Provided further that in line with Auto Development Policy (ADP) 2016-21 the 18th March, 2016 notified by Ministry of Industries and Production vide Notification No. 2(9)/2013-LED-II dated 2nd June, 2016, the additional customs-duty leviable under this notification shall not be charged on sub-components and components, imported in any kit form, by an assembler or manufacturer declared to be an investor under Category-A “Greenfield Investment” for a period of five years and under Category-B “Brownfield Investment” for a period of three years, for assembly or manufacturing of the vehicles, excluding vehicles at Sr. No. 1, 7, 9, 11 and 12, specified in the above Table”,

 

17Provided also that in line with electric vehicles policy approved vide Economic Coordination Committee (ECC) decision in case No. ECC-244/27/2020 dated 10.06.2020 and ratified by the Cabinet vide case No. 399/23/2020 dated 16.06.2020 implemented vide Part V(A) to the 5th Schedule of Customs Act, 1969, the additional Customs duty leviable under this notification shall not be charged on sub-components and components, imported in any kit form, by an assembler or manufacturer approved by Engineering Development Board for the Electric vehicles mentioned under Sr. No. 2,3,5 and 11 of the Table of SRO 693(I)/2006 dated 01.07.2006 for a period of five years from the start of assembly or manufacturing of respective vehicles:

 

17Provided also that Appendix-I and Appendix-II will be updated bi-annually by December 31 and June 30 of every year on recommendation of Engineering Development Board. The components or assemblies localized by any OEM or vendor in respective vehicle category shall qualify for inclusion in Appendix-I and Appendix- II.

 

 

APPENDIX-I

HS Code

Description

4008.1110

- - - Following components for vehicles of chapter 87

 

"- - - Weather strips for doors, glass and luggage compartments for vehicles of heading

87.03 and vehicles of sub - heading 8704.3130, 8704.2190 and 8704.3190 except weather strip moulding (inner or outer) for glass"21;

4008.1910

- - - Following components for vehicles of chapter 87

 

"- - - Weather strips for doors, glass and luggage compartments for vehicles of heading

87.03 and vehicles of sub - heading 8704.3130, 8704.2190 and 8704.3190 except weather strip moulding (inner or outer) for glass"21;

4008.2110

- - - Following components for vehicles of chapter 87

 

"- - - Weather strips for doors, glass and luggage compartments for Vehicles of heading

87.03 and vehicles of sub - heading 8704.3130, 8704.2190 and 8704.3190 except weather strip moulding (inner or outer) for glass"21;

4008.2910

- - - Following components for vehicles of chapter 87

 

"- - - Weather strips for doors, glass and luggage compartments for Vehicles of heading

87.03 and vehicles of sub - heading 8704.3130, 8704.2190 and 8704.3190 except weather strip moulding (inner or outer) for glass"21;

4009.1120           - - - Following components for vehicles of chapter 87

  1. Water hoses for engine cooling system and heater, air cleaner hoses and Brake oil reservoir hose for vehicles of heading 87.03 and vehicles of sub-heading-8704.2190, 8704.3130 and 8704.319021
  2. Hose side demister for vehicles of heading 87.03"21; 4009.2120 - - - Following components for vehicles of chapter 87
  1. Water hoses for engine cooling system and heater, air cleaner hoses and Brake oil reservoir hose for vehicles of heading 87.03 and vehicles of sub-heading 8704.2190, 8704.3130 and 8704.319021
  2. Hose side demister for vehicles of heading 87.0321 4009.3120 - - - Following components for vehicles of chapter 87
  1. Water hoses for engine cooling system and heater, air cleaner hoses and Brake oil reservoir hose for vehicles of heading 87.03 and vehicles of sub — heading 8704.2190, 8704.3130 and 8704.319021
  2. Hose side demister for vehicles of heading 87.0321 4009.4120 - - - Following components for vehicles of chapter 87
  1. Water hoses for engine cooling system and heater, air cleaner hoses and Brake oil reservoir hose for vehicles of heading 87.03 and vehicles of sub-heading 8704.2190, 8704.3130 and 8704.319021
  2. Hose side demister for vehicles of heading 87.0321

4012.9020         - - - Rim flaps, mud flaps / guards and rubber mouldings (except packing rubber and rubber for on / off switch) for vehicles of heading 87.11

4016.9930        - - - Following component for vehicles of chapter 87

  1. Articles for mounting silencers, exhaust pipes and mufflers for vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130 and 8704.319021;
  2. Floor mats, grommets for transfer box lever, exhaust pipe mountings, covers for pedals, bump stop and front cover for center tunnel, meant for industrial assembly / manufacture of vehicles of sub - heading 8703.3225

 

  1. 17Rubber cover for kick starter lever, foundation rubber for engine mounting, rubber bushings, rubber plugs, rubber insulators, packing rubber for wind screen, rubber mountings for silencer pipes bushes, boots, and mud flappers, meant for industrial assembly / manufacture of vehicles of sub – heading 8703.2115, 8703.8030, 8704.3150”;
  2. Rubber cushions for bonnet for vehicles of heading 8704.2190 and 8704.3190"21;
  3. Rubber cushions for bonnet, rubber drain plug, hole covers and pads or cushions for absorbing shock / noise in struts / suspensions, for Vehicles of heading 87.0319
  4. Rubber for bottom channel for holding window glass for motor cars of heading 87.03 and vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240 and 8704.3130
  5. Runs for glasses for motor cars of heading 87.03 (not exceeding 1200cc) and vehicles of sub-headings 8703.2193, 8704.2190 and 8704.319019
  6. Trim door opening and door moulding for door opening for motor cars of heading 87.03 and vehicles of sub-heading 8703.2113, 8703.2193, 8703.2195, 8703.2240 and 8704.3130

4016.9950        Bush rubber for rear shocks for vehicle of heading 87.11

4821.1010        --- Paper graphics of a kind used for decoration for vehicles of heading 87.03 and 87.1119

5703.291021      "- - - Of a kind used in vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130, 8704.3190 (cut to size and shaped)" 21;

5703.391021      "- - - Of a kind used in vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130, 8704.3190 (cut to size and shaped)" 21;

6813.2010           - - - Of asbestos for vehicles of heading 87.11

7007.1111           “------- (1) Wind Screen, Rear and window glasses for vehicles of sub -heading 8704.2190,

8704.319021;

(2)       Glasses for doors, glass plain, glass window (sliding), glass for rear door, glass for rear quarter window and glass for wind screen for vehicles of sub - heading 87.03” 21;

7007.111921      Omitted

7007.2111-------------- (1) Wind Screen, Rear and window glasses for vehicles of sub -heading 8704.2190 and

8704.319021

  1. Glasses for doors, glass plain, glass window (sliding), glass for rear door, glass for rear quarter window and glass for wind screen for vehicles of heading 87.03"21;

 

7007.211921

Omitted

7009.1010

“- - - Rear view mirrors for vehicles of heading 87.03 and vehicles of sub-headings 8704.3130, 8704.3150, 8704.2190, 8704.3190, and vehicles of heading 87.11"21;

7014.0010

- - - Glass for head lamps for vehicles of heading 87.11

7315.1910

- - - Adjuster for chain for vehicles of heading 87.11

7318.2220

- - - Washer kick starter knuckle for vehicle of heading 87.11

7320.1010

- - - For motor cars of heading 87.03 and vehicles of sub- headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.2190, 8704.3130 and 8704.3190

7320.1030

- - - Following Components for vehicle of heading 87.11:-

  1. For Front Shocks:-
    1. Spring Front fork
    2. Spring Rebound Front Fork
    3. Ring Oil Seal Stopper

 

  1. Pipe Comp Front Fork

(B)For Rear Shocks:

  1. Spring Rear Cushion
  2. Seat Spring Rear Cushion
  3. Spring Rebound Rear Cushion

(C)For Engine:-

  1. Spring Kick Starter Double Coil
  2. Spring Kick Starter Ratchet
  3. Spring Shift Drum Stopper Spring Clutch
  4. Spring Clutch Damper

(D)Other:-

  1. Spring Oil Through
  2. Spring side cover lock
  3. Seat valve spring outer;

 

8206.0010

“- - - For vehicles of heading 87.03 and vehicles of sub headings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21;

8301.2010

- - - Door locks for vehicles of sub - heading 8704.3190; Locks, meant for vehicles of heading

 

87.11

8302.1010

"(1)

Of a kind used in vehicles for doors, luggage compartment, luggage compartment lid,

 

 

seats, bonnet, rear deck for vehicles of 87.03 and vehicles of sub-heading 8704.2190, 8704.3130 and 8704.3190 (except sliding door hinges)" 21;

 

(2)

Of a kind used in vehicles for doors and seats for vehicles of sub-headings

 

 

8703.2193, 8703.2260, 8703.2313, 8703.2323 and 8703.3223.

 

(3)

Of a kind used in vehicles for rear deck for vehicles of sub- heading 8704.2190

 

(4)

Of a kind used for doors and rear deck for vehicles of sub - heading 8704.3190

8302.3010        “- - - (1) Latch assembly for hood/doors (manual type) of a kind used in vehicles for doors, luggage compartment lid and bonnet, for motor cars of heading 87.03 and vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240 (except back door latches), 8704.2190,

8704.3130 and 8704.319021

  1. Grip bars/ assistants, grab rails and parts thereof for vehicles of heading 87.03 and vehicles of sub-headings 8704.3130 (except foamed type), 8704.2190 and 8704.319021;
  2. Strikers for latches for vehicles of heading 87.03 and vehicles of sub-heading 8704.2190 and 8704.319021;
  3. Window opening mechanism, rack and pinion type for vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130 and 8704.319021
  4. Tail board fittings for vehicles of heading 87.11” 21

8302.3020        - - - Window opening mechanism, rack and pinion type for vehicles of sub- heading 8704.2219

 

8310.0020

- - - Number plates assembly and parts thereof for vehicles of heading 87.11

8407.3110

- - - For vehicles of heading 87.11

8407.3210

- - - For vehicles of heading 87.11

8407.3310

- - - For vehicles of sub-headings 8703.2113, 8703.2195, 8703.2240, 8704.3130 and

8704.3190

8409.9110

- - - - Following for engines as well as of vehicles of heading 87.11;

  1. Cylinders
  2. Cylinder Blocks
  3. Cylinder Liners
  4. Crank Case & case covers

 

 

(5)

Cylinder Head covers

 

(6)

Piston

 

(7)

Sprocket Cam

 

(8)

Cylinder Head (upto 70cc)

8409.9120

(1)

Intake manifold for automotive engines as well as of motor cars of heading 87.03 (not exceeding 800cc) and vehicles of sub-headings 8703.2113, 8703.2195, 8703.2240,

8704.3130 and 8704.3190;

 

(2)

Cover cylinder head for automotive engines as well as of motor cars of heading

87.03 (not exceeding 800cc) and vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(3)

Oil pan, for automotive engines as well as for motor cars of heading 87.03 (not exceeding 1200cc) and vehicles of sub- heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(4)

Timing belt cover (Steel Sheet / Plastic) for automotive engines as well as of motor cars of heading 87.03 and vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(5)

Exhaust manifold (Iron Casting Type) for automotive engines as well as of motor cars of heading 87.03 and vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(6)

Oil strainer for automotive engines as well as of motor cars of heading 87.03 (not exceeding 1200cc) and vehicles of sub- headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190

 

(7)

Cover exhaust manifold for engines as well as of motor cars of heading 87.03 (not exceeding 800cc) and vehicles of sub- headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(8)

Intake manifold for automotive engines as well as of motor cars of heading 87.03 (not exceeding 800cc) and vehicles of sub-headings 8703.2113, 8703.2195, 8703.2240,

8704.3130 and 8704.3190

 

(9)

Pipe Water outlet / inlet for engines as well as of motor cars of heading 87.03 (not exceeding 1200cc)

8413.3030        - - - Following parts of vehicles of Chapter 87;

  1. Oil pump assembly for motor cars of heading 87.03 (not exceeding 800cc) and vehicles of sub-headings 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190
  2. Water pump for internal combustion piston engines for motor cars of heading

87.03 and vehicles of sub-heading 8703.2113 and 8704.3190

 

8413.3040

- - - Oil pump for vehicles of heading 87.11

8415.2010

- - - For motor cars of heading 87.03 and vehicles of sub- headings 8703.2113,

 

8703.2193, 8703.2195, 8703.2240 and 8704.3130

8421.2310

- - - For motor cars of heading 87.03 and vehicles of sub- headings 8703.2113, 8703.2195,

 

8703.2240, 8704.3130, 8704.3190, 8703.3225 and vehicles of heading 87.11 (other than foam

 

type)

8421.3110

"- - - For vehicles of heading 87.03 (excluding wet type), vehicles of sub-headings 8704.2190, 8704.3130, 8704.3150, 8704.3190 and vehicles of heading 87.11 (other than foam type)” 21;

8425.4900

- - Other

8481.8020

- - - Cock for fuel tank for vehicles of heading 87.11

8483.1012

- - - - Shaft for rocker arm, shaft worm, spindle shaft complete gear, spindle for cam

 

guide sprocket and crank shaft for vehicles of heading 87.11

 

8483.1013        - - - Gear Shift Assembly Complete, Shaft Assembly Kick Starter for vehicle of heading 87.11

8483.4012        - - - - Gears (C1, C2, C3, C4, M2, M3, M4) for vehicles of heading 87.11 8483.5010        - - - (1) Flywheels (without built-in gear ring) for motor cars of heading 87.03 and

vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190; Fly wheels for vehicles of heading 87.11

  1. Pulley for crank shaft for motor cars of heading 87.03 (not exceeding 1200cc) and vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;
  2. Fly wheels for vehicles of heading 87.11
  3. Pulleys and pulley blocks for vehicles of heading 87.11

8483.6091------------- Shaft coupling (including Universal Joints) for vehicles of heading 87.11

 

8483.9020

--- For vehicles of heading 87.11

8484.1022

- - - - Gaskets for water pump, inlet pipe and cylinder block plate for vehicles of heading 8703.2193

8507.1010

"- - - Meant for vehicles of heading 87.03, vehicles of sub - headings 8704.2190, 8704.3130, 8704.3150, 8704.3190 and vehicles of heading 87.11"21;

8511.2010

- - - Magneto for vehicles of heading 87.11

8511.3010

- - - Ignition Coils for vehicles of heading 87.11

8511.8030

- - - Capacitor Discharge Ignition (CDI) unit for vehicles of heading 87.11

8511.9010

- - - Aluminium casted distributor case for motor cars of heading 87.03 (not exceeding 800cc) and vehicles of sub- heading 8704.3190

8512.2010

17- - - Following components of motor vehicles;

  1. Head light for vehicles of sub-headings 8703.2115, 8703.2260, 8703.2313, 8703.2323, 8703.3223, 8703.3225, 8703.8030, 8704.3150 and vehicles of heading 87.11;
  2. Lamp assembly, front turn signal for motor cars of heading 87.03 (not exceeding 1200cc), vehicles of   subheadings   8703.2113,   8703.2115,   8703.2193, 8703.2195, 8703.2240,8703.3225, 8703.8030, 8704.3130, 8704.3150, 8704.3190 and vehicles of heading 87.11
  3. Lamp assembly for luggage compartment for vehicles of heading 87.03
  4. Lamp assembly for illuminating license plate for vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130 and 8704.319021;
  5. Rear combination lamp / back up lamp / rear turning indicator / plough lamps / reverse light / parking light for motor cars of heading 87.03, vehicles of sub-headings 8703.2113, 8703.2115, 8703.2195, 8703.2240, 8703.3225, 8703.8030, 8704.3130, 8704.3150, 8704.3190 and 87.1121;
  6. Lamp assembly, side body turning indicator for vehicles of heading 87.03 and vehicles of sub-headings 8704.3130, 8704.3150 and 8704.319021;
  7. Turn flasher assembly for motor cars of heading 87.03 and vehicles of sub-heading 8703.2115, 8703.8030 and 8704.3150 winking devices for vehicles of heading 87.1121
  8. Car ceiling lamp/room lamp for vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130 and 8704.3190"21;

8512.3010        17“----- For vehicles of sub-headings 8703.2113, 8703.2115, 8703.2193, 8703.2195, 8703.2240,

8703.3225, 8703.8030, 8704.2190, 8704.3130, 8704.3150, 8704.3190 and heading 87.11”;

 

8512.4010           "- - - (1) Wiper arm and blade assembly for vehicles of heading 87.03 and vehicles of sub- heading 8704.2190 and 8704.319021;

  1. Link assembly for wiper arm and blade for vehicles of heading 87.03 and vehicles of sub - headings 8704.2190, 8704.3130 and 8704.3190"21;

 

8512.9010

- - - Parts of the products of sub-headings 8512.4010

Omitted

8518.210021

Omitted

8518.220021

Omitted

8518.291021

Omitted

8536.5021

- - - - (1) Ignition switches without combination steering lock for motor cars of heading

 

87.03 (not exceeding 800 cc)

 

(2)        Ignition switches (with or without combination lock) and handle switch assembly

 

for vehicles of heading 87.11

 

(3)        Switch assembly combination and ignition switch assembly for vehicles of

 

heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(4)        " Door switches for interior lamp for motor cars of heading 87.03 and vehicles of sub

-heading 8704.2190 and 8704.3190"21;

8537.1010

- - - Fuse boxes with fuses for vehicles of heading 87.11

8544.3011

“------ Wiring sets and cable sets for vehicles of heading 87.03 and vehicles of sub-headings

8704.2190, 8704.3130, 8704.3150, 8704.3190 and vehicles of heading 87.11"21;

8544.4221

“------ Wiring sets and cable sets for vehicles of heading 87.03 and vehicles of sub-headings

8704.2190, 8704.3130, 8704.3150, 8704.3190 and vehicles of heading 87.11"21;

8707.1000

- For vehicles of heading 87.03

8707.9010

- - - For vehicles of headings 8704.2190 and 8704.3190

8708.1020

“- - - (1) Following components for vehicles of heading 87.0321

  1. Front and Rear Bumper and part thereof
  2. Member / reinforcement for bumpers
  3. Side supports / stay / bracket for bumpers

(2)     Front bumper and parts thereof for vehicles of sub - headings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21;

8708.2110        "- - - For vehicles of heading 87.03 and vehicles of sub headings 8704.2190, 8704.3130 and 8704.3190"21;

 

8708.2931

- -

- - (A) Following components for motor cars of heading 87.03

 

(1)

Air outlet assembly

 

(2)

Anchor for spare tyre and parts thereof

 

(3)

Apron assembly for front fender and parts thereof

 

(4)

Arm rest for door trims

 

(5)

Ash trays and parts thereof

 

(6)

Battery trays, clamps, bands and parts thereof

 

(7)

Bezels for inside door handles

 

(8)

Bottom channel for holding window glass

 

(9)

Bracket rear suspension

 

(10)

Compartments for floor, rear floor sides, plates side sills for floor, side lockers

 

 

for floor

 

(11)

Console box assembly and parts thereof

 

(12)

Cover assembly for spare wheel and parts thereof (hard board type)

 

(13)

Cover Fuel pipe19 (for vehicles upto 1200cc)

 

(14)

Cross member assemblies for floors and parts thereof

 

  1. Cross member for roof
  2. Cross member/ member front lower, front hood (for vehicles up to 1200cc)
  3. Door assemblies complete (for vehicles not exceeding 800cc)
  4. Door checker/ stopper assemblies and parts thereof
  5. Door gussets21
  6. Door handles inside and parts thereof
  7. Door handles outside and parts thereof
  8. Door seals for service holes (PE Sheet type)
  9. Engine compartment assembly (complete)
  10. Engine under covers (dust/ mud/ splash protectors)
  11. Extensions for rear floor cross members
  12. Floor assemblies (complete)
  13. Fresh air control assembly (for vehicles not exceeding 800cc)
  14. Front floor panels (for vehicles not exceeding1200cc)
  15. Front hood assembly (complete)
  16. Front radiator grill (non plated) and parts thereof
  17. Garnishes and trims (inner/ outer) other than chrome plated
  18. Handles window regulator and parts thereof
  19. Heat insulators/ baffles for floor insulation from exhaust pipe
  20. Heating/demisting/ventilation/ defrosting air ducts and nozzles
  21. Housing/ box fuel Inlet
  22. Inner panel for windshield header/ rail roof / frame roof assembly (front/ rear) and parts thereof
  23. Inner Panels for quarter window; and
  24. Inner pillars/ reinforcements for side body
  25. Instrument panel complete excluding foamed
  26. Linings/ guards for fender and wheel housing
  27. Link rods for activating door latches
  28. Lower cross member for dash panel and parts thereof (for vehicles not exceeding 1200cc)
  29. Luggage door and parts thereof (hatch back type) (for vehicles not exceeding 800cc)
  30. Member assembly front side with or without apron and parts thereof (for vehicles not exceeding 800cc)
  31. Member cowl and parts thereof
  32. Member for engine mounting (for vehicles not exceeding 800cc)
  33. Member steering support and parts thereof
  34. Member tail end (for vehicles not exceeding 800cc)
  35. Package tray trim/ trim partition
  36. Pan rear floor and parts thereof (for vehicles not exceeding 1200cc)
  37. Panel assembly for head lamp support/ mounting and parts thereof
  38. Panel assembly for rear combination lamp mounting and parts thereof
  39. Panel complete rear skirt and parts thereof
  40. Panel dash (sheet metal) (for vehicles not exceeding 1200cc)
  41. Panel dash side (for vehicles not exceeding 1200cc)
  42. Panel front fenders (for vehicles not exceeding 1200cc)
  43. Panel grill lower (for vehicles not exceeding 800cc)
  44. Panel hood assembly and parts thereof (for vehicles not exceeding 1200cc)
  45. Panel/ Trim assembly for doors and parts thereof except retainers/ clips
  46. Panels rear wheel housing inner) and parts thereof (for vehicles not exceeding 1200cc)
  47. Panels door Inner and outer (sheet Metal) front, rear and back (for vehicles not exceeding 800cc)
  48. Panels for cowl and parts thereof, (for vehicles not exceeding 1200cc)
  49. Panels for partition and support to package tray trim /and parts thereof
  50. Panels rear wheel housing inner and outer) and parts thereof (for vehicles not exceeding 800cc)
  51. Panels side body (for vehicles not exceeding 800cc)
  52. Parts of instrument panel other than those classifiable under chapter 90 (excluding

 

foamed parts and registers/louvers)

  1. Protective moldings for doors
  2. Rails for center roof and reinforcements, assemblies and parts thereof
  3. Rails for roof side and reinforcements, assemblies and parts thereof (for vehicles upto 1200cc)
  4. Reinforcement radiator grill19 (for vehicles not exceeding 1200cc)
  5. Reinforcements for center floor cross members
  6. Reinforcements for strikers and hinges
  7. Rod/stay/prop for hood support assembly and parts thereof
  8. Roof head lining (except those meant for sunroof)
  9. Roof panel complete (for vehicles not exceeding 800cc)
  10. Shroud for fan
  11. Side body assembly (complete)
  12. Side member assemblies for rear floors and parts thereof
  13. Side members/ reinforcement for main floor and parts thereof
  14. Side sill panel assemblies for main floor, and parts thereof
  15. Silencer/ insulation sheets inner) for dash panel
  16. Sound deadening/ insulation/ silencer sheets for floor
  17. Strikers for rear seat holding
  18. Sun Visor
  19. Torsion bars for hinges of luggage compartment
  20. Trim door opening
  21. Upper front member for hood latch (for vehicles not exceeding 1200cc)
  22. Upper rail/member/frame for back window assembly and parts thereof
  23. Wheel housing mudguards/ mud flaps

(B)Following components for vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240

  1. Anchor for spare tyre and parts thereof
  2. Ash trays and parts thereof
  3. Battery trays, clamps, bands, box and parts thereof
  4. Bottom channel for holding window glass
  5. Bracket/ reinforcement/ hangers for suspension
  6. Brackets for seat belts
  7. Case/ bezel for inside door handles
  8. Chassis and parts thereof
  9. Cross member assemblies for floor and parts thereof
  10. Door assemblies (except front door)
  11. Door seals for service holes (PE sheet type)
  12. Emblems
  13. Engine under cover (dust, mud, splash protectors)
  14. Floor assemblies
  15. Floor mats
  16. Frame floor side
  17. Frame for front suspension
  18. Frame roof front/ plate side and parts thereof
  19. Front body
  20. Front floor panels and parts thereof
  21. Garnish head lamp and center
  22. Garnish, side defroster cover, Control lever
  23. Handles, inside pull and parts thereof, except sliding door handles
  24. Handles, outside and parts thereof, except sliding door handles
  25. Handles, window regulator and parts thereof
  26. Inner pillars/ reinforcements for side body
  27. Inner/ outer panel for rear quarter
  28. Instrument panel complete, excluding foamed
  29. Knob door inside lock
  30. Link rods for activating door latches
  31. Member floor side

 

  1. Member for engine room
  2. Pan rear floor and parts thereof
  3. Panel engine room
  4. Panel/ trim assembly for doors and parts thereof except retainers/ clips
  5. Panels for rear wheel housing (inner) and parts thereof
  6. Parts of instrument panel other than those classifiable under Chapter 90 (excluding foamed parts and lid glove box)
  7. Pillar front outer
  8. Reinforcements floor side
  9. Retainer licence plate
  10. Service lid, rear floor
  11. Shroud for fan
  12. Shut stop for center door
  13. Side body assembly
  14. Side member assemblies for floor and parts thereof
  15. Side sills, front and center (inner)
  16. Sill rear side inner
  17. Splash plate for radiator
  18. Sun visor
  19. Trim rail roof
  20. Wheel housing mud guards/ mud flaps

(C)Following components for vehicles of sub-heading 8703.2193

  1. Bar for side window
  2. Battery trays, clamps, bands and parts thereof
  3. Bezels for inside door handles
  4. Bracket rear licence plate
  5. Carrier for spare tyre and parts thereof
  6. Cover assembly for spare wheel
  7. Door handles inside/pull and parts thereof
  8. Door handles outside and parts thereof

(9)

Door seals for service holes (PE Sheet type)

(10)

Duct ventilator/hose defroster

(11)

Emblems/Stickers

(12)

Floor mat (plastic)

(13)

Garnish head lamp

(14)

Handles window regulator and parts thereof

(15)

Head lamp support

(16)

Knob for door lock

(17)

Mud flaps

(18)

Panel/ Trim assembly for doors and parts thereof except retainers/ clips

(19)

Rod/stay/prop hood support assembly and parts thereof

(20)

Service lid rear floor

(21)

Sound deadening/ insulation/ silencer sheets for floor

(22)

Stay for radiator support

(23)

Stay hood lock opener

(24)

Sun Visor

(D)

Following components for SUV vehicles of heading 87.03”;

(1)

Battery tray assembly and parts thereof

(2)

Cross member (rear)

(3)

Door checkers

(4)

Door handle outside

(5)

Door handles (inner / outer)

(6)

Door seals (PE sheet type)

(7)

Dust cover assembly and parts thereof, for gear change / control lever

(8)

End plate

(9)

Filler neck assembly

(10)

Floor mat assemblies

 

(11)

Front grill / radiator grill

(12)

Gear box cover assembly for dust / mud protection

(13)

Gusset plates for engine comportment

(14)

Heat insulators

(15)

Heat protector for exhaust manifold

(16)

Hood cover / soft top

(17)

Hood sticks

(18)

Lining for roof

(19)

Mud covers for engine

(20)

Mudguard / mud flaps

(21)

Opener filler lid

(22)

Pad for Roof Headlining

(23)

Plastic linings for wheel housing / fender

(24)

Plate assembly for hand brake mounting

(25)

Plate holder set for mounting cable for hood opening

(26)

Reinforcement for bumpers

(27)

Reinforcements for front floor

(28)

Reinforcements for roof (sheet metal)

(29)

Reinforcements for seat belts

(30)

Reinforcements for storage box / jack box

(31)

Rod/prop for hood support and parts thereof

(32)

Side body gussets

(33)

Side plates for floor

(34)

Side sills for floor

(35)

Sound deadening / silencer sheet

(36)

Stay for fan shroud

(37)

Stay for radiator

(38)

Step assembly rear and mounting brackets

(39)

Sun visor

(40)

Windshield header panel / Rail

  1. 17“Parts and accessories of bodies (including cabs) for vehicles of sub - heading 8703.2115 and 8703.8030”;

(F)Following components for vehicles of sub - heading 8703.3225

  1. Air intake grills for fenders / side grill
  2. Bonnet buffer and wind screen staples
  3. Centre facia console assembly (central part of instrument panel) and parts thereof
  4. Channels for body drain
  5. Check link cover (strap) for internal door hinge
  6. Cubby box (Console Tunnel base)
  7. Door glass holding channel
  8. Door Trim (Casing)
  9. Emblems
  10. Escutcheon (Bazel) for window regulator
  11. Escutcheon for sill for lock control
  12. Floor mats
  13. Gear box tunnel pad (insulation)
  14. Handles for tail doors
  15. Handles for window regulators
  16. Header rails and parts thereof
  17. Hood cover (soft top tarpaulin)
  18. Hood sticks and parts thereof for soft top mounting
  19. Inside handles for doors
  20. Lamp guards
  21. Lid assembly for locker / storage and parts thereof
  22. Locking angle for locker / storage lids
  23. Plate assembly for hand brake mounting
  24. Radiator grill assembly and parts thereof

 

  1. Rear curtain rod and clamp
  2. Rear mud flaps
  3. Roll over bar assembly and parts thereof
  4. Shedder assembly (PE plastic sheet type) for door insulation
  5. Side running board
  6. Step assemblies and parts thereof
  7. Sun visors

8708.2932        - - - - (A) Following components for motor cars of sub-heading 8703.2119 and 8703.3112

 

 

(1)

Sash Front Door Rear R/L (excl. door windows)

(2)

Sash Rear Door Center (excl. door windows)

(B)

Following components for motor cars of heading 87.03::

(1)

Knuckle Steering

(2)

Water Pump

(3)

Fuel Filter

(4)

Seat Recliner

(5)

Air Cleaner Assembly

(6)

Steering (Manual)

(7)

Engine

(8)

Transmissions (Manual)

8708.2941

- - - -

(A) Following components for vehicles of sub – heading 8704.2190

 

(1)

Ash tray and parts thereof

 

(2)

Battery tray and parts thereof

 

(3)

Box for tuner

 

(4)

Brace for instrument panel

 

(5)

Braces for apron

 

(6)

Channel assay roof drip

 

(7)

Cross members for front floors

 

(8)

Deck assembly and parts thereof

 

(9)

Door handle outside

 

(10)

Door seals (PE sheet type)

 

(11)

Door trims (Board type only)

 

(12)

Ducts for heater / defroster / ventilation

 

(13)

Dust covers

 

(14)

Emblems for vehicles

 

(15)

Floor mat assemblies

 

(16)

Front grill

 

(17)

Garnishes

 

(18)

Handle for door window mechanism

 

(19)

Heat insulators for floor

 

(20)

Inner panel for upper back window

 

(21)

Inner side members for front floor

 

(22)

Lining for roof

 

(23)

Louvers for cowl top

 

(24)

Louvers for quarter ventilation

 

(25)

Mud covers for engine

 

(26)

Mudguard

 

(27)

Pad for Roof Headlining

 

(28)

Plastic linings for wheel housing / fender

 

(29)

Plate for rear wheel housing

 

(30)

Reinforcement for bumpers

 

(31)

Reinforcement for floor panel / member floor side (cab)

 

(32)

Reinforcement for instrument panel or member steering support

 

(33)

Rod / prop for hood support

 

(34)

Scuff Plates

 

(35)

Shroud for fan

 

(36)

Side panel for cowl top

 

  1. Sills for floors
  2. Sound deadening / Silencer sheet
  3. Sun visor
  4. Trims for seaming welts
  5. Windshield header panel / Rail

(B)Following components for vehicles of sub – heading 8704.3190

  1. Ash tray and parts thereof
  2. Bars for protection rear glass
  3. Cases / Bezels for inside handles
  4. Channel for glass door support and rubber thereof
  5. Chassis and parts thereof excluding frame rear for floor
  6. Cover Frame Floor
  7. Cross member assemblies and parts thereof (sheet metal)
  8. Door handles (inside / Outside)
  9. Door trims and parts thereof
  10. Frame for front floor
  11. Frame for front suspension
  12. Frame roof front and parts thereof
  13. Front / radiator grill and parts thereof
  14. Front pillars (inner / outer) and parts thereof
  15. Front show and parts thereof
  16. Garnishes / Covers / Ventilators and parts thereof
  17. Handle for closing deck gate
  18. Handle for door window mechanism
  19. Holder Jack
  20. Instrument panel and parts thereof excluding foamed
  21. Insulator for deck floor (sheet metal)
  22. Knob for door lock
  23. Licence plate, brackets and parts thereof
  24. Mat for floor (plastic)
  25. Member assemblies for floor and parts thereof (sheet metal)
  26. Members, brackets and panels for service lid (27) Mud flaps / mud guards (plastic)
  1. Panel / member engine room
  2. Panel Cab Back and parts thereof
  3. Panel floor front; floors assemblies and parts thereof (sheet metal)
  4. Rear deck and parts thereof
  5. Rear Gate and parts thereof
  6. Reinforcements for suspension
  7. Roof head lining
  8. Roof, roof assemblies and parts thereof
  9. Seat locks and parts thereof
  10. Shroud for fan
  11. Side sill
  12. Splash panel for engine
  13. Splash plate for radiator
  14. Sun visor
  15. Wheel housing inner and parts thereof

(C)Following components for vehicles of sub- heading 8704.3130

  1. Anchor for spare tyre and parts thereof
  2. Ash trays and parts thereof
  3. Battery trays, clamps, bands, box and parts thereof
  4. Bottom channel for holding window glass
  5. Bracket/ reinforcement/ hangers for suspension
  6. Brackets for seat belts
  7. Case/ bezel for inside door handles
  8. Chassis and parts thereof
  9. Cross member assemblies for floor and parts thereof

 

  1. Door assemblies (except front door)
  2. Door seals for service holes (PE sheet type)
  3. Emblems
  4. Engine under cover (dust, mud, splash protectors)
  5. Floor assemblies
  6. Floor mats
  7. Frame floor side
  8. Frame for front suspension
  9. Frame roof front/ plate side and parts thereof
  10. Front body
  11. Front floor panels and parts thereof
  12. Garnish head lamp and centre
  13. Garnish, side defroster cover, Control lever
  14. Handles, inside pull and parts thereof, except sliding door handles
  15. Handles, outside and parts thereof, except sliding door handles
  16. Handles, window regulator and parts thereof
  17. Inner pillars/ reinforcements for side body
  18. Inner/ outer panel for rear quarter
  19. Instrument panel complete, excluding foamed
  20. Knob door inside lock
  21. Link rods for activating door latches
  22. Member floor side
  23. Member for engine room
  24. Pan rear floor and parts thereof
  25. Panel engine room
  26. Panel/ trim assembly for doors and parts thereof except retainers/ clips
  27. Panels for rear wheel housing (inner) and parts thereof
  28. Parts of instrument panel other than those classifiable under Chapter 90 (excluding foamed parts and lid glove box)
  29. Pillar front outer
  30. Reinforcements floor side
  31. Retainer licence plate
  32. Service lid, rear floor
  33. Shroud for fan
  34. Shut stop for center door
  35. Side body assembly
  36. Side member assemblies for floor and parts thereof
  37. Side sills, front and centre (inner)
  38. Sill rear side inner
  39. Splash plate for radiator
  40. Sun visor
  41. Trim rail roof
  42. Wheel housing mud guards/ mud flaps
  1. 17 Parts and accessories of bodies (including cabs) for vehicles of sub - heading 8704.3150

8708.3020        17“- - - Following components for vehicles of heading 87.03:

  1. Brake pedal box assembly and parts, top cover for brake pedal (sheet metal), hand brake lever assembly and parts and brake pipes of vehicles of sub – heading 8703.3225
  2. Brake tubes, pipes and their covers of vehicles of heading 87.0321
  3. Brakes and parts thereof (excluding brake master cylinder / pump, actuator and strut) and Mounted brake linings for vehicles of sub heading 8703.2115 and 8703.8030.
  4. Cable parking brake and parts thereof, of motor cars of heading 87.03 and vehicles of sub-heading 8703.2113, 8703.2195 and 8703.2240;
  5. Disc/ drum brake of motor cars of heading 87.03 and vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195 and 8703.2240

 

 

(6)

Dust Cover for brake disc of motor cars of heading 87.03 and vehicles of sub-heading

 

8703.2193

(7)

Lever parking brake assembly and parts thereof, of vehicles of heading 87.03 and

 

vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8703.2260,

8703.2313, 8703.2323 and 8703.322321

(8)

Brake Pedal and housing assembly and parts thereof for motorcars of sub-headings

 

87.03 and 8703.2193

(9)

Brake Pedal assembly and parts thereof; Parking brake cable and parts thereof for SUVs vehicles of 87.0321;

8708.3031

- - - -

(A) Following components, of vehicles of sub – heading 8704.2190

 

(1)

Brake Drum

 

(2)

Brake tubes

 

(3)

Front brake Disc

 

(4)

Parking brake cable

 

(B)

Following components, of vehicles of sub – heading 8704.3190

 

(1)

Brakes

 

(2)

Brake tubes/ pipes

 

(3)

Brake drums

 

(4)

Lever assembly for parking brake and parts thereof

 

(5)

Mounted brake linings

 

(6)

Cable assembly for parking brakes, Pedal brake assembly and parts thereof

 

 

(C)

Following components, of vehicles of sub- heading 8704.3130

 

(1)

Brake tubes, pipes and their covers

 

(2)

Cable parking brake and parts thereof

 

(3)

Disc/ drum brake

 

(4)

Lever parking brake assembly and parts thereof,

 

(D)

Following components, of vehicles of sub- heading 8704.3150

 

(1)

Brakes and parts thereof (excluding brake master cylinder / pump, actuator and strut),

 

(2)

Mounted brake linings

8708.5020

(1)

Built up drive axles for vehicles of sub – heading 8703.2115 and 704.3150;

 

(2)

Drive shafts for axle, drive shaft housing and breathing pipe for vehicles of sub heading 8703.2115 and 8704.3150;

 

(3)

Built up Non driving axles for motor cars of heading 87.03 (of engine capacity upto 1200cc) and vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240 and 8704.3130

 

(4)

Cap spindle for grease and Hub front wheel and trailing / suspension rear arm

and parts thereof (for vehicles not exceeding 1200cc) for motor cars of heading 87.03;

 

(5)

Cap spindle for grease for vehicles of heading 8703.2113, 8703.2193, 8703.2195, 8703.2240 and 8704.3130; Hub for front axle for vehicle of sub heading 8704.2190

 

(6)

Cap spindle for grease for vehicles of sub heading 8704.3190

 

(7)

Propeller shaft for vehicles of sub heading 8703.2193

 

(8)

Housing rear axle and propeller shaft for vehicles of sub- heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190

8708.7010

"- - - Road wheels (excluding casted), rims discs, caps, ornaments and weights for vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21;

8708.8010        17“- - - (1) Suspension Shock absorbers for motor cars of heading 87.03 and vehicles of sub-

 

headings   8703.2113,    8703.2115,    8703.2193,    8703.2195,    8703.2240,    8703.8030,

8704.2190, 8704.3130, 8704.3150 and 8704.3190

(2) Parts of shock absorber for the vehicle of sub heading 8703.2115 and 8704.3150”; 8708.9120 "- - - Radiator other than aluminum core for vehicles of heading 87.03 and vehicles of sub-

headings 8704.2190, 8704.3130, 8704.3150, 8704.3190 and 8703.3225"21;

8708.9210 “- - - Silencers, mufflers and exhaust pipes for vehicles of heading 87.03 and vehicles of sub- headings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21;

8708.9310           - - - (1) Upper and lower plates for clutch housing (other than clutch plate) of a kind used with engines not exceeding 1200cc for motor cars of heading 87.03 and vehicles of sub-heading 8703.2113 8703.2195, 8703.2240, 8704.3130 and 8704.3190

  1. Lower plate for clutch housing (other than clutch plate) for vehicles of sub-heading 8703.2193
  2. Arm clutch release for motor cars of heading 87.03 exceeding 1200cc

8708.9410     17“- - - (1) Steering wheels (non air bag/ non PU foamed type) for motor cars of heading 87.03 not exceeding 1200cc and vehicles of sub-headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8704.3130 and 8704.3190; steering knuckle arm left and steering drag link for vehicles of sub heading 8704.2190

 

 

(2)

Steering gears and links for motor cars of heading 87.03, not exceeding 800 cc

 

(3)

Covers for steering column for motor cars of heading 87.03 and vehicles of sub-

 

 

heading 8703.2113, 8703.2195, 8703.2240, 8704.3130 and 8704.3190;

 

(4)

Steering column for vehicles of sub-heading 8703.2113, 8703.2195, 8703.2240 and

 

 

8704.3130;

 

(5)

Bracket steering gear box for vehicles of sub-heading 8703.2113, 8703.2195,

 

 

8703.2240 and 8704.3130 and

 

(6)

steering wheels, steering columns, steering boxes and Steering stem for vehicles of

 

 

sub - heading 8703.2115, 8703.8030, 8704.3150”;

8708.9930

- - - For

the vehicles of heading 87.03:

 

(A)

Following components for motor cars of heading 87.03

 

(1)

Air cleaner housing assembly and parts thereof

 

(2)

Arms for fan belt adjusting

 

(3)

Bracket for generator

 

(4)

Bracket for holding jack

 

(5)

Bracket for jacking19 (for vehicles upto 1200cc)

 

(6)

Bracket for stabilizing bar (for vehicles upto 1200cc)

 

(7)

Bracket front seat inside19 (for vehicles upto 1200cc)

 

(8)

Bracket parking lever

 

(9)

Cable assembly for choke and parts thereof

 

(10)

Cable for heater / air vent control and parts thereof (for vehicles upto 800cc)

 

(11)

Cable for hood latch release and parts thereof

 

(12)

Cables for opening fuel lid and parts thereof

 

(13)

Cables for opening trunk latch and parts thereof

 

(14)

Cap assembly fuel filler maintenance hole

 

(15)

Cap assembly fuel filler

 

(16)

Engine mounting brackets (sheet metal and cast iron, non rubberised)

 

(17)

Fuel filler neck and pipe (other than plastic)

 

(18)

Fuel pipe (main)

 

(19)

Fuel pipe (return)

 

(20)

Fuel tank (other than plastic)

 

(21)

Fuel tank bands / brackets for mounting

 

(22)

Fuel tube protectors19 (for vehicles upto 1200cc)

 

(23)

Gear shift control rods or transmission cables (manual type)19 (for vehicles not

 

exceeding 1200cc)

  1. Heater unit (using engine heat) and parts thereof
  2. Lever fuel lid latch release
  3. Lever gear shift control and parts thereof (manual)
  4. Lever hood latch release
  5. Lever luggage door latch release
  6. Lid assembly fuel filler;
  7. Nozzle and hose for wind shield washer
  8. Pedal and housing assembly (brake, clutch, accelerator and parts thereof)
  9. Protectors for fuel filler pipes
  10. Protectors fuel tank
  11. Reserve tank and hose assembly for radiator tank and parts thereof
  12. Seat track adjuster without reclining mechanism
  13. Shield fuel tank filler pipe
  14. Towing hooks
  15. Washer jar

(B)Following components for vehicles of heading 8703.2113, 8703.2195 and 8703.2240

  1. Air suction assembly for air cleaner
  2. Arm for gear select assembly and parts thereof
  3. Arms for fan belt adjusting
  4. Bracket for brake fluid reservoir
  5. Bracket for fuse box
  6. Bracket for generator
  7. Bracket for holding jack
  8. Bracket for mounting radiator
  9. Bracket for suspension
  10. Brake fluid reservoir assembly and parts thereof
  11. Cable assembly for accelerator and parts thereof
  12. Cable assembly for choke and parts thereof
  13. Engine mounting brackets (sheet metal and cast iron, non rubberised), excluding front mount bracket.
  14. Fuel filler neck and pipe
  15. Fuel tank (other than plastic)
  16. Gear shift control rods/ transmission cables
  17. Hanger for muffler
  18. Hooks for engine lifting
  19. Lever gear shift control and parts thereof
  20. Nozzle and hose for wind shield washer
  21. Plates, seats, hangers, spring shackle (inner/ outer) bump stoppers, for use with leaf springs
  22. Reserve tank and hose assembly for radiator water and parts thereof
  23. Spare wheel carrier and bolt assembly
  24. Support set for gear shift arm
  25. Towing hooks
  26. Washer jar

(C)Following components for vehicles of sub-heading 8703.2193

  1. Arms for fan belt adjusting
  2. Engine mounting brackets (sheet metal and cast iron, non rubberised)
  3. Fuel tank
  4. Lifting hooks for engine
  5. Link rods for activating door latches
  6. Nozzle wind shield washer
  7. Pedal and housing assembly for brake, clutch, accelerator and parts thereof
  8. Plate cylinder block
  9. Plates, seats, hangers, shackles (inner/ outer), stop rear bump, bumper rear spring and pad for leaves for use with leaf spring assemblies

 

  1. Reserve tank and hose assembly for radiator water and parts thereof
  2. Washer jar

(D)Following components for SUV vehicles of heading 87.0321

  1. Bands / protective blankets / brackets for fuel tank.
  2. Brackets for accelerator cable.
  3. Brackets for mounting air cleaner assembly
  4. Brackets for mounting bumper
  5. Brackets for mounting engine (sheet metal)
  6. Brackets for mounting fuse box / relay box
  7. Brackets for mounting power steering tank, power steering pump and power steering oil reservoir
  8. Brackets for mounting radiator
  9. Brackets for mounting silencers / mufflers / exhaust pipes
  10. Brackets for mounting suspension (sheet metal)
  11. Brackets for mounting vacuum tank
  12. Brackets for mudguards
  13. Brackets for release mechanism for hood opening
  14. Brackets for seats
  15. Cable for hood latch release
  16. Cable for hood lock control
  17. Engine cooling system pipes (metal)
  18. Fuel pipe for inlet fuel
  19. Fuel tubes, main and return
  20. Knobs for seat reclining knuckles
  21. Mounting system for spare wheel
  22. Oil cooler pipes (metal)
  23. Pedal Assembly for accelerator and parts thereof
  24. Pedal assembly for clutch and parts thereof
  25. Power adjustment screw for hand brake
  26. Radiator pipes
  27. Resonator for air intake system.
  28. Seat Adjusting Track
  29. Spare wheel carrier assembly and parts thereof
  30. Towing hook
  31. Wire protecting pads (foam)

(E)17Following components for vehicles of sub heading 8703.2115 and 8703.8030

  1. Air filter assembly and parts thereof
  2. Battery carrier assembly and parts thereof
  3. Brackets
  4. Brake oil tank
  5. Breather tube
  6. Chassis and parts thereof
  7. Control cables assemblies and parts thereof
  8. Engine mounting bolt; Engine cover
  9. Engine mounting bridge / cross member
  10. Fuel pipes
  11. Fuel tank assembly and parts thereof; cap fuel tank
  12. Fuse box assembly and parts thereof
  13. Handle grip
  14. Internal cock for handle grip
  15. Kick starter assembly and parts thereof
  16. Knobs
  17. Lever assembly gear shift
  18. Sleeve for wheel
  19. Spacer for wheel
  20. Speedometer cable assembly and parts thereof
  21. Torque rod

 

  1. Wheel nuts”;

(F)Following components for vehicles of sub – heading 8703.3225

  1. Accelerator cable
  2. Accelerator pedal assembly and parts thereof
  3. Air cleaner housing assembly and parts thereof
  4. Battery tray assembly and parts thereof
  5. Bracket for body floor support
  6. Bracket for fuel tank pipes
  7. Bracket for mounting body on chassis
  8. Bracket for mounting internal light
  9. Bracket for power steering oil reservoir
  10. Bracket for power steering pump mounting
  11. Bracket for radiator mounting
  12. Bracket for roll over bar
  13. Bracket for silencer / exhaust pipe support
  14. Bracket for track rod protection
  15. Clutch pipe (feed)
  16. Cover for fuse box
  17. Cradle / support for fuel tank
  18. Cyclone pipe oil drain (sheet metal)
  19. Flinger / damper
  20. Fuel filler cover assembly and parts thereof
  21. Fuel filler neck
  22. Gate plate for gear lever retention
  23. Hose assembly for washer
  24. Internal air duct for heater
  25. Lower air duct
  26. Lower seat for front spring
  27. Pipe assembly for fuel and parts thereof
  28. Pipe for heater return
  29. Retainer for suspension spring
  30. Retaining plate for pulley
  31. Rings for securing shock absorbers
  32. Spare wheel carrier assembly and parts thereof
  33. Stay assembly with cover for roll over bar
  34. Strap for fuel tank
  35. Strut for air cleaner bracket
  36. Top plate (plate grommet) for gear change assembly
  37. Towing hook
  38. Towing ring recovery and lashing assembly and parts thereof
  39. Underside protection bar assembly for propeller shaft
  40. Washer tank assembly and cap thereof

8708.9940        - - - Following components for vehicles of heading 87.04:

  1. For vehicles of sub - heading 8704.2190
    1. Air cleaner housing (sheet metal type)
    2. Air intake duck for air cleaner assembly
    3. Bands / protective blankets / brackets for fuel tank.
    4. Cable for hood lock control
    5. Clutch Oil Tube (6) Duct snorkel
  1. Filler neck assembly
  2. Fuel tank (metal type)
  3. Fuel tubes, main and return (metallic Type)
  4. Heat insulators
  5. Jar assembly washer
  6. Mounting system for spare wheel
  7. Neck assembly for fuel tank

 

  1. Pedal Assembly for accelerator and parts thereof
  2. Protector for fuel tank
  3. Radiator pipes
  4. Reserve tank for radiator
  5. Resonator for air intake system.
  6. Rods for activating door latches
  7. Rods for radiator support
  8. Seat Adjusting Track
  9. Shackles / shackle plates / pins / hangers for leaf springs
  10. Towing hook
  11. U bolt for leaf springs
  12. Vacuum tank

(B)For vehicles of sub - heading 8704.3190

  1. Air suction assembly for air cleaner
  2. Arm for gear select assembly and parts thereof
  3. Battery box / battery clamp / battery band
  4. Battery cover
  5. Brackets for brake fluid reservoir, washer tank and water reservoir tank
  6. Brackets for fuel box
  7. Brackets for mounting alternator
  8. Brackets for mounting engine / excluding bracket front mount
  9. Brackets for mounting radiator
  10. Brackets for mounting rear deck
  11. Brackets for mounting steering gear box
  12. Brackets for seat belts
  13. Brackets for suspension system
  14. Brackets sub – cleaner
  15. Brake fluid reservoir assembly and parts thereof
  16. Bush spring shackle, shackle plates, bumpers, hangers, stoppers and U bolts for leaf springs
  17. Cable assemblies for accelerator and choke
  18. Emblems
  19. Fuel pipes
  20. Fuel tank and parts thereof
  21. Hooks for lifting engine
  22. Lever set for gear shift control
  23. Nuts for wheels
  24. Pedal Brake, clutch and accelerator assemblies and parts thereof
  25. Plate cylinder block
  26. Rod / Bracket for tension assembly
  27. Rod gear shift select
  28. Spare wheel carrier and bolt assembly and parts thereof
  29. Stay / Brackets for bumpers
  30. Support set for gear shift arm
  31. Towing hook
  32. Washer jar assembly for wind shield
  33. Water reservoir tanks
  34. Wind shield washer nozzle assembly

(C)Following components for vehicles of heading 8704.3130

  1. Air suction assembly for air cleaner
  2. Arm for gear select assembly and parts thereof
  3. Arms for fan belt adjusting
  4. Bracket for brake fluid reservoir
  5. Bracket for fuse box
  6. Bracket for generator
  7. Bracket for holding jack
  8. Bracket for mounting radiator

 

  1. Bracket for suspension
  2. Brake fluid reservoir assembly and parts thereof
  3. Cable assembly for accelerator and parts thereof
  4. Cable assembly for choke and parts thereof
  5. Engine mounting brackets (sheet metal and cast iron, non rubberised), excluding front mount bracket.
  6. Fuel filler neck and pipe
  7. Fuel tank (other than plastic)
  8. Gear shift control rods/ transmission cables
  9. Hanger for muffler
  10. Hooks for engine lifting
  11. Lever gear shift control and parts thereof
  12. Nozzle and hose for wind shield washer
  13. Plates, seats, hangers, spring shackle (inner/ outer) bump stoppers, for use with leaf springs
  14. Reserve tank and hose assembly for radiator water and parts thereof
  15. Spare wheel carrier and bolt assembly
  16. Support set for gear shift arm
  17. Towing hooks
  18. Washer jar

(D)Following components for vehicles of sub heading 8704.3150

  1. Air filter assembly and parts thereof
  2. Battery carrier assembly and parts thereof
  3. Brackets
  4. Brake oil tank
  5. Breather tube
  6. Chassis and parts thereof
  7. Control cables assemblies and parts thereof
  8. Engine mounting bolt; Engine cover
  9. Engine mounting bridge / cross member
  10. Fuel pipes
  11. Fuel tank assembly and parts thereof; cap fuel tank
  12. Fuse box assembly and parts thereof
  13. Handle grip
  14. Internal cock for handle grip
  15. Kick starter assembly and parts thereof
  16. Knobs
  17. Lever assembly gear shift
  18. Sleeve for wheel
  19. Spacer for wheel
  20. Speedometer cable assembly and parts thereof
  21. Torque rod
  22. Wheel nuts

8714.1010        - - Saddles

8714.1020        - - - Following components for vehicles of heading 87.11

  1. Air cleaner assembly and parts thereof
  2. Axles (front, rear, collar) and parts thereof
  3. Battery Box
  4. Bolt for engine mounting
  5. Brake cables and parts thereof
  6. Brake drums
  7. Brake pedal shaft
  8. Brake pads
  9. Brake rods, linkages and levers
  10. Brake shoes/ Mounted brake lining of asbestos
  11. Brakes (complete)

 

  1. Cams for brakes
  2. Chain case and parts thereof
  3. Clutch cables and parts thereof
  4. Complete fuel system
  5. Complete wheels
  6. Fenders and parts thereof
  7. Foot rest and parts thereof
  8. Frame / chassis and parts thereof
  9. Front fork assembly (complete)
  10. Fuel pipes / tubes
  11. Fuel tank (whether or not painted)
  12. Fuel tank cap (with or without lock)
  13. Fuse boxes
  14. Gear shift lever pad
  15. Grips (whether or not twisting) and parts thereof
  16. Handle bar and parts thereof
  17. Hubs for wheels
  18. Lever set kick starter
  19. Levers for front brake and clutch, and parts thereof
  20. Motorcycle head lamp housing
  21. Mudguards / flaps (plastic)
  22. Nipples for wheels
  23. Parts for rear shock absorber assembly other than bushes, collars, stoppers, valves, guides, rings, pistons, rebound springs, plates and spacers19
  24. Parts of front fork assembly other than outer inner tubes, guides, races, ball assembly, seals, brackets, valves, oil locks, rings, pistons, stoppers, collars, front fork springs, plugs and bridges for forks19 and seat rebounds
  25. Rear shock absorbers assembly
  26. Rim flaps (other than rubber) for wheels
  27. Rims for wheels
  28. Side covers and parts thereof
  29. Side stands / main stands and parts thereof
  30. Silencers / exhaust pipes / mufflers and parts thereof
  31. Spokes for wheels
  32. Sprockets for wheels
  33. Swinging arm assembly and parts thereof except collar and bushing
  34. Throttle cables and parts thereof
  35. Torque link and parts thereof
  36. Regulator Rectifier
  37. Clutch Assembly
  38. Emblems / Stickers

8714.1030        - - - Drum gear shift for vehicles of heading 87.11; 8714.1040   - - - Following components for vehicles of heading87.11:

(A)For Front Shocks:

  1. Pipe Seat
  2. Seat Bottom
  3. Pipe /Inner Tube
  4. Case Bottom/Outer Tube

(B)For Rear Shocks:

  1. Case Damper/ Pump/ Rebound
  2. Stopper Valve

(C)For Engine:

  1. Cam for Brakes
  2. Lever Cam Brake Front & Rear

 

9026.1020        - - - Dipstick/gauge oil level for engines of motor cars of heading 87.03 and vehicles of sub- headings 8703.2113, 8703.2193, 8703.2195, 8703.2240, 8703.3225, 8704.3130 and

8704.3190

 

9029.2011

- - - - Mechanical type for motor cars of heading 87.03 (not exceeding 800cc), vehicles of heading 87.11 and vehicles of sub - heading 8704.3190

9032.8910

- - - Temperature control switches for vehicles of sub - heading 8703.2115 and 8704.3150

9104.0020

- - - For vehicles of sub-heading 8703.2260, 8703.2313, 8703.2323, 8703.3223 and 8704.2190

(2)        For vehicles of sub-heading 8704.2190

 

9401.2010

"- - - For vehicles of heading 87.03 and vehicles of sub-headings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21;

9401.992021

Omitted

9401.9910

"- - - Seat parts made of foam, head/arm rests and seat frames for vehicles of heading 87.03 and vehicles of subheadings 8704.2190, 8704.3130, 8704.3150 and 8704.3190"21; and

9613.8010

- - - Lighters used with motor cars of heading 87.03

=========================

 

Appendix-II

 

HS Code

Description

 

4009.1110        - - - Following components for vehicles of chapter 87

  1. Air cleaner hoses and water cooling system hoses (except turbo system hoses) for vehicles of sub-heading 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990 and 8701.214018
  2. Radiator / engine cooling system hoses and air hoses for vehicles of sub - headings 8701.9220 and 8701.9320.
  3. Air cleaner hoses, vacuum tank hoses and water cooling system hoses (except turbo system hoses) for Vehicles of heading 87.02.
  4. Water cooling system hoses (except turbo system hoses) and air cleaner hoses for vehicles of sub - heading 8704.2219
  5. Air cleaner hoses for vehicles of sub – headings 8704.2299 and 8704.2390 4009.2110        - - - Following components for vehicles of chapter 87
  1. Air cleaner hoses and water cooling system hoses (except turbo system hoses) for vehicles of sub-heading 8701.2120, 8701.2190. 8701.2290. 8701.2390, 8701.2990 and 8701.214018
  2. Radiator / engine cooling system hoses and air hoses for vehicles of sub - heading 8701.9220 and 8701.9320.
  3. Air cleaner hoses, vacuum tank hoses and water cooling system hoses (except turbo system hoses) for Vehicles of headings 87.02.
  4. Water cooling system hoses (except turbo system hoses) and air cleaner hoses for vehicles of sub – heading 8704.2219
  5. Air cleaner hoses for vehicles of sub – headings 8704.2299 and 8704.2390 4009.3110        - - - Following components for vehicles of chapter 87
  1. Air cleaner hoses and water cooling system hoses (except turbo system hoses) for vehicles of sub - heading 8701.2120, 8701.2190. 8701.2290, 8701.2390, 8701.2990 and 8701.214018

 

  1. Radiator / engine cooling system hoses and air hoses for vehicles of sub - heading 8701.9220 and 8701.9320.
  2. Air cleaner hoses, vacuum tank hoses and water cooling system hoses (except turbo system hoses) for vehicles of heading 87.02.
  3. Water cooling system hoses (except turbo system hoses) and air cleaner hoses for vehicles of sub – heading 8704.2219
  4. Air cleaner hoses for vehicles of sub – headings 8704.2299 and 8704.2390 4009.4110        - - - Following components for vehicles of chapter 87
  1. Air cleaner hoses and water cooling system hoses (except turbo system hoses) for vehicles of sub - heading 8701.2120, 8701.2190. 8701.2290. 8701.2390, 8701.2990 and 8701.214018
  2. Radiator / engine cooling system hoses and air hoses for vehicles of sub - heading 8701.9220 and 8701.9320.
  3. Air cleaner hoses, vacuum tank hoses and water cooling system hoses (except turbo system hoses) for Vehicles of heading 87.02.
  4. Water cooling system hoses (except turbo system hoses) and air cleaner hoses for vehicles of sub – heading 8704.2219
  5. Air cleaner hoses for vehicles of sub – headings 8704.2299 and 8704.2390

4012.9010        - - - Flaps for use with tyres / tubes for vehicles of sub - heading 8701.2120, 8701.2140, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704.6030 and 8704.221918

4016.9920        - - - Following component for vehicles of chapter 87

  1. Cushion / pad sub assembly for cabin mounting rear member, for vehicles of sub heading 8704.2219 and 8704.603018
  2. Cushion for radiator mounting, for vehicles of sub -heading 8704.2299
  3. Mud flaps / mud guards for vehicles of heading 87.02 and sub - headings 8701.2120, 8704.2040, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704.2219, 8704.2299, 8704.6030 and 8704.239018
  4. Rubber boots, grommets and dampers, for agricultural tractors of sub - heading 8701.9220 and 8701.9320.

 

4821.1020

- - - Paper graphics of a kind used for decoration for vehicles of heading 8701.9220 and 8701.9320

7007.1119

- - - - Wind Screen, rear, window and other glasses for vehicles of heading 87.0419

7007.2119

---- (1) Wind Screen, rear and window glasses for vehicles of heading 87.0419

7307.9110

- - - Flanges for air intake pipes for agricultural tractors (upto 60 kW) of sub - heading 8701.9220 and 8701.9320

7320.1020

- - - For vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490,

8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704.2219, 8704.2299, 8704.6030 and

8704.239018

7326.9020

- - - Tool box for agricultural tractors of sub – heading 8701.9220 and 8701.9320

8206.0020

--- For vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490,

8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9220, 8701.9320, 8704.2219,

8704,2299, 8704.6030 and $704.239018

8302.1020

- - - Of a kind used in doors of vehicles of heading 8704.2299

8302.3020        17“- - - Window opening mechanism, rack and pinion type for vehicles of sub-heading 8704.2219 and 8704.9030”

 

8310.0010

- - - Number plate assembly and parts thereof for agricultural tractors of sub-heading

 

 

8408.2010

8701.9220 and 8701.9320

 

- - - For agricultural tractors of sub - heading 8701.9220 and 8701.9320

8409.9920

- - - Following other parts of engines for vehicles of Chapter 87:

  1. Inlet or exhaust valves for agricultural tractors of sub - heading 8701.9220 and 8701.9320
  2. Exhaust manifold, inlet manifold, blanking plate / cover, scoop / lube oil reservoir, oil pan / sump with base, bracket rocker shaft, with or without support, tappet cover, timing case, Hub for idler gear and timing cover for agricultural tractors of sub - heading 8701.9220 and 8701.9320 (excluding 4x4 tractors)
  3. Connecting rod cap, tappets / push rods and rocker arm for agricultural tractors (upto 60 kW) of sub - heading 8701.9220 and 8701.9320
  4. Piston assembly and parts thereof and connecting rod for agricultural tractors (upto 41 kW) of sub – heading 8701.9220 and 8701.9320.
  5. Rear end housing for agricultural tractors (upto 41 kW) of sub - heading 8701.9220 and 8701.9320

8413.3020        - - - Following parts for Vehicles of sub-heading 8701.9220 and 8701.9320;

  1. Oil pump assembly
  2. Water pump for internal combustion piston engines

 

8421.2320

- - - For vehicles of sub-heading 8701.9220 and 8701.9320

8428.9010

- - - Hydraulic lift assembly / lift body (other than electronically controlled) for agricultural tractors of sub heading 8701.9220 and 8701.9320

8481.8010

- - - Cock for fuel tank for agricultural tractors of sub -heading 8701.9220 and 8701.9320

8483.1011

- - - - Following components for agricultural tractors of sub- heading 8701.9220 and 8701.9320

  1. Cam shafts (for three cylinder engines only)
  2. Counter shaft
  3. Crown wheel and pinion
  4. Main shaft
  5. Pinion constant mesh
  6. Pinion counter shaft (3rd)
  7. Pinion counter shaft (high)
  8. Pinion differential
  9. Pinion intermediate
  10. Pinion main drive shaft (upto 60 kW)
  11. Pinion main shaft inter
  12. Pinion PTO ground speed / PTO input
  13. PTO shaft assembly
  14. Shaft for driven gear
  15. Shaft for driving wheel
  16. Shaft for hydraulic lift mechanism
  17. Shaft for PTO Clutch
  18. Shaft for PTO drive
  19. Shaft for PTO drive gear
  20. Shaft for rear drive (upto 60 kW)

8483.4011---------- Following components for agricultural tractors of sub- heading 8701.9220 and

8701.9320

  1. Carrier assembly planetary gears and parts thereof
  2. Carrier, rear axle assembly and parts thereof
  3.  

(4)

Fly wheel rings

 

Drive gears PTO

 

 

(5)

Gear 3rd / Gear drive 3rd and reverse

 

(6)

Gear assembly and gears driven 3rd

 

(7)

Gear assembly and gears driven 4th

 

(8)

Gear constant mesh / Gear drive 4th

 

(9)

Gear drive 1st and 2nd

 

(10)

Gear drive Reverse, 1st and 2nd

 

(11)

Gear driven 2nd

 

(12)

Gear for hydraulic pump drive (for tractors upto 55HP)

 

(13)

Gear ground speed for PTO / Driven Gear for PTO

 

(14)

Gear lubricating oil, (for tractors upto 60 kW)

 

(15)

Gear main shaft inter and high

 

(1 6)

Gear main shaft low / Gear driven 1st

 

(17)

Gear PTO constant mesh / Drive gear PTO

 

(18)

Gear PTO driven (for tractors upto 41 kW)

 

(19)

Gears reverse cluster / gear driven reverse

 

(20)

Intermediate gear (for tractors upto 41 kW)

 

(21)

Planetary gear (for tractors upto 41 kW)

 

(22)

Side gears / differential gears

 

(23)

Timing gears (for three cylinder engines only)

8483.5020

- - - (1)

Fly wheels (without built-in gear ring) for vehicles of Heading 87.02 and sub – headings 8701.2120, 8701.2140, 8701.2190, 8701.2290, 8701.2390, 8701.2990,

8701.9220, 8701.9320, 8704,2219, 8704,2299 and 8704.239018

 

(2)

Fan pulley for vehicles of heading 87.02 and sub-heading 8701.2120, 8701.2140, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704.2299 and 8704.239018

 

(3)

Pulleys for crank shaft, alternator and water pump for agricultural tractors of sub - heading 8701.9220 and 8701.9320

8483.9010        - - - Following components for agricultural tractors of sub-heading 8701.9220 and 8701.9320

  1. Coupler differential lock/actuating collar
  2. Coupler PTO
  3. Coupler rear drive (for tractors upto 60 kW)
  4. Dog splitter
  5. Fork for clutch / lever fork for clutch
  6. Fork shifter planetary / Fork splitter
  7. Parts for carrier assembly planetary gears
  8. Parts for rear axle carrier assembly
  9. Planetary coupler / sleeve sliding gear
  10. Shifter fork

 

8484.1021

- - - - Gaskets and joints for agricultural tractors of sub -heading 8701.9220 and 8701.9320 (excluding 4x4 tractors)

8507.1020

- - - Meant for vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9290, 8701.9390, 8704.2219,

8704,2299, 8704.6030 and 8704.239018.

8511.4011

- - - -For agricultural tractors of sub - heading 8701.9220 and 8701.9320

8511.5010

- - - Alternator assembly for agricultural tractors of sub -heading 8701.9220 and 8701.9320

8511.8010

- - - Heater/glow plugs for agricultural tractors of sub -heading 8701.9220 and 8701.9320

8512.2020

- - - Following parts of motor vehicles;

  1. Head light for vehicles of sub-heading 8701.9220 and 8701.9320
  2. Lamp assembly, front turn signal for vehicles of sub-Heading 8701.9220, 8701.9320, 8704.6030 and 8704.221918
  3. Lamp assembly for illuminating license plate for vehicles of sub-heading 8701.9220 and 8701.9320
  4. Rear combination lamp / back up lamp / rear turning indicator / plough lamps / reverse light / parking light for vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701,2990, 8701,9290,

8701.9390, 8704.2219, 8704.2299, 8704.6030 and 8704.239018

 

 

  1. Lamp assembly, side body turning indicator for vehicles of sub-heading 8701.9220 and 8701.9320
  2. Ceiling lamp/room lamp for vehicles of sub-heading 8704,2219 and 8704.603018

8512.3020

- - - For vehicles of heading 87.02 and sub-headings 8701.9220 and 8701.9320.

8512.4020

Wiper arm and blade assembly for vehicles of sub-heading 8704.2219 and 8704.603018

8512.9020

- - - Knobs for light switches for agricultural tractors of sub -heading 8701.9220 and 8701.9320

8536.5022

- - - - Neutral safety switch, push button, ignition switch, light switch, stop light switch, and horn switch for vehicles of sub-heading 8701.9220 and 8701.9320

8544.3012

- - - Wiring sets and cable sets for vehicles of heading 87.02 and sub- headings 8701.2120, 8701.2140, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9290, 8701.9390,

8704,2219, 8704,2299, 8704.6030 and 8704.239018

8544.4222

"- - - Wiring sets and cable sets for vehicles of heading 87.02 and sub- headings 8701.2120, 8701.2140, 8701.2490, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9290, 8701.9390,

8704.2219, 8704.2299, 8704.6030 and 8704.239018

8707.9090

- - - Other

8708.1010

- - - (1) Bumpers (metal) for vehicles of sub-heading 8701.2120, 8701.2190, 8701.2290,

8701.2390, 8701.2990 and 8701.214018

 

(2) Bumper (sheet metal type) and parts thereof for vehicles of headings 8704.2219, 8704.2299, 8704.6030 and 8704.239018

8708.2120

- - - For vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490,

8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704.2219, 8704.2299, 8704.6030 and

8704.239018

8708.2911

- - - (A) Following components for vehicles of sub-headings 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990 and 8701.214018

  1. Battery carrier assembly and parts thereof
  2. Cabin tilt stay stopper assembly
  3. Cross members for frame
  4. Floor mat assembly set
  5. Footsteps for cabin entry
  6. For 4x2 vehicles: Brackets for shock absorber mounting; Brackets for mounting engine (casting and sheet metal type); Brackets for exhaust pipe; Brackets / support for air and vacuum tank; Brackets for mounting pedal set; Brackets assembly for leaf spring assembly (casting); Brackets for air cleaner
  7. Frame assembly
  8. Gussets / stiffeners for frame
  9. Licence plate assembly and parts thereof
  10. Long members for frame (4x2 vehicles only)
  11. Mounting support for spare wheel carrier
  12. Rear body trim
  13. Rear member assembly for cabin mounting
  14. Shroud for fan
  15. Sun visor

(16)Lever Anchor19

(B)     Following components for agricultural tractors of sub - heading 8701.9220 and 8701.9320

  1. Battery box assembly and parts thereof
  2. Body shield / guard PTO
  3. Cowl radiator assembly and parts thereof
  4. Fan shroud assembly and parts thereof
  5. Fender assemblies and parts thereof
  6. Filler neck for lubricating oil
  7. Flaps for front hood
  8. Foot rest

 

  1. Foot step / foot board assemblies and parts there of
  2. Grill assembly / hood cowling assembly and parts thereof
  3. Guard / protector for PTO
  4. Heat shields
  5. Hood assembly and parts thereof
  6. Instrument panels
  7. Seat support assembly and parts thereof
  8. Side channels
  9. Side grill
  10. Support for front throttle
  11. Warning indicator housing

8708.2920        - - - Following components for vehicles of headings 87.02

  1. Battery carrier assembly and parts thereof
  2. Cross members for frame
  3. Engine hood and parts thereof
  4. Floor assembly and parts thereof
  5. Frame assembly
  6. Gussets / stiffeners for frame
  7. Licence plate assembly
  8. Long members for frame (for buses exceeding seating capacity for 35 persons)
  9. Outrigger and meter penal for installing instruments (sheet metal)
  10. Roof assembly and parts thereof
  11.  

 

(12)

Side body assembly and parts thereof

8708.2942

(A)

Following components for vehicles of sub – heading 8704.2219 and 8704.603018

 

(1)

Battery Carrier assembly and parts thereof

 

(2)

Cabin tilt stay stopper assembly and parts thereof

 

(3)

Cargo body / deck and parts thereof

 

(4)

Cross member for frame

 

(5)

Cushion for engine mounting

 

(6)

Door trim assembly (Board / PVC type)

 

(7)

Emblems

 

(8)

Floor mat

 

(9)

Frame assembly

 

(10)

Front brackets for cabin mounting

 

(11)

Front radiator grill

 

(12)

Gussets / stiffeners for frame

 

(13)

Licence plate assembly

 

(14)

Panel for front corner assembly (sheet metal)

 

(15)

Rear member assembly for cabin mounting and parts thereof

 

(16)

Shroud for fan

 

(17)

Splash boards for mud flap mounting

 

(18)

Splash covers for engine

 

(19)

Sun visors

 

(B)

Following components for vehicles of sub-heading 8704.2299 and 8704.603018&19

 

(1)

Battery Carrier assembly and parts thereof

 

(2)

Cabin tilt stay stopper assembly and parts thereof

 

(3)

Cargo body / deck and parts thereof

 

(4)

Cross members for frame

 

(5)

Door trim assembly (Board / PVC type)

 

(6)

Dust protection seal for doors (PE sheet type)

 

(7)

Entry steps for cabin

 

(8)

Floor mat

 

(9)

Frame assembly

 

(10)

Gussets / stiffeners for frame

 

(11)

Licence plate assembly and parts thereof

 

(12)

Long members for frame

 

Shroud for fan

 

(13)

Rod / Prop / support for bonnet

(14)

Scuff plates

(15)

Shroud for fan

(16)

Splash covers for engine

(17)

Sun visors

(18)

Trim for front pillar

(19)

Lever Anchor19

(C)

Following components for vehicles of sub – heading 8704.2390

(1)

Battery Carrier assembly and parts thereof

(2)

Bracket assembly front for cabin mounting

(3)

Cabin tilt stay stopper assembly and parts thereof

(4)

Cross members for frame

(5)

Dust protection seal for doors (PE sheet type)

(6)

Entry steps for cabin

(7)

Floor mat

(8)

Frame assembly

(9)

Gussets / stiffeners for frame

(10)

Licence plate assembly and parts thereof

 

 

 

(11)

Long members for frame (6x2 vehicles only)

(12)

Member assembly for mounting engine and parts thereof

(13)

Rear body trim (other than injection moulded)

(14)

Rod / prop / support for bonnet

(15)

Scuff plates

(16)

Sun visor

(17)

Trim for front pillar

(18)

Lever Anchor19

8708.3010

- - - (A)

Following components for vehicles of heading 87.01

 

(1)

Axle shaft assembly for brakes and parts thereof (other than those for disc brakes)

 

 

for tractors of sub-heading 8701.9220 and 8701.9320

 

(2)

Brake assembly for tractors of sub – heading 8701.9220 and 8701.9320

 

(3)

Brake bands for tractors of sub - heading 8701.9220 and 8701.9320

 

(4)

Brake drums and air/vacuum tanks for vehicles of sub-heading 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990 and 8701.214018

 

(5)

Brake drums and Mounted brake linings for tractors of sub heading 8701.9220

 

 

and 8701.9320

 

(6)

Brake pedal assemblies and parts thereof for tractors of sub - heading 8701.9220

 

 

and 8701.9320

 

(7)

Cam shafts for brake for tractors of sub – heading 8701.9220 and 8701.9320

 

(8)

Cross shaft assembly and parts thereof for tractors of sub - heading 8701.9220 and

 

 

8701.9320

 

(9)

Brake levers, Brake Pedals, Lever for brake band, Lever for hand brake, Lock

 

 

combined brakes, Shaft for brake pedals and support for brake lever for tractors of

 

 

subheading 8701.9220 and 8701.9320

 

(10)

Lever assembly for parking brake/hand brake (4x2 vehicles only) for vehicles of sub- heading 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990 and 8701.214018

 

(11)

Rod and yoke assembly and parts thereof for tractors of sub - heading 8701.9220

 

 

and 8701.9320

 

(B)

Following components for vehicles of heading 87.02

 

(1)

Air tanks and vacuum tanks for brakes

 

(2)

Lever assembly for parking brake / hand brake (for vehicles of seating capacity less

 

 

than 35 persons)

 

  1. Oil/air pipes and brake drums,
  2. Brake pedal assembly and parts thereof

8708.3032      - - - (A) Following components, of vehicles of sub-heading 8704.2219 and 8704.603018

  1. Air tanks / vacuum tanks
  2. Brake drums
  3. Lever assembly for parking brake / hand brake
  4. Oil and air pipes / tubes

(B)Following components, of vehicles of sub – heading 8704.2299

  1. Brake drums
  2. Lever assembly for parking brake / hand brake
  3. Oil and air pipes / tubes
  4. Brake pedal assembly and parts thereof

(C)Following components, of vehicles of sub – heading 8704.2390

  1. Brake drums
  2. Lever assembly for parking brake / hand brake
  3. Oil and air pipes / tubes

8708.4010        - - - Following components for agricultural tractors of sub heading 8701.9220 and 8701.9320

  1. Gear Boxes
  2. Bottom cover plate for gear box housing
  3. Cover / Cup for gear shift lever
  4. Cover assembly for drive shift bearing for use in gear box
  5. Cover plates for gear box
  6. Cover shift tower for gear box
  7. Gear box housing
  8. Housing for gear shift lever
  9. Knob for gear shift lever
  10. Lever 3rd and 4th / Fork Third (for gear box)
  11. Lever assembly transmission / gear shift lever and parts thereof
  12. Lever for 1st and 2nd gate / gear
  13. Lever for reverse gear
  14. Lever planetary / lever assembly splitter and parts thereof
  15. Plate for mounting gear shift lever
  16. Plunger
  17. Plunger / dog for gear box
  18. Retainer for main drive shaft for use in gear box
  19. Rod splitter for gear box
  20. Seat for spring for use in gear box
  21. Selector 3rd / Gate 3rd and 4th for gear box
  22. Selector for planetary shaft / support for splitter for gear box
  23. Shaft / fork for clutch release
  24. Shift tower for gear box
  25. Shift tower for gear box
  26. Shifter rails / rods
  27. Shifter rails / rods for gear box
  28. Supports for splitters
  29. Top cover assembly for gear box and parts thereof
  30. Shaft for differential lock
  31. Shaft reverse/shaft reverse cluster

8708.5010        - - - (1) Built up drive axles with hub and brake drum for v ehicles of heading 87.02 and sub headings 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8704,2219,

8704.2299, 8704.6030 and 8704.239018

  1. Wheel hubs for axles for vehicles of heading 87.02 and sub headings 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.2140, 8701.2490, 8704.2219, 8704.229918

 

  1. Built up drive axles for agricultural tractors of sub-heading 8701.9220 and 8701.9320 (excluding 4x4 tractors); Bushing PTO sleeve spacer, Cap for differential, Cap for driven axle (for Tractors upto 80HP), Cap for PTO / end cover for PTO, collar for differential lock, collar for PTO, coupler differential lock/actuating collar, coupler rear drive, cover PTO shaft/ cover upper axle casing, cover rear axle/side final drive, cover rear axle housing, differential cam lock assembly and parts thereof, differential housing/ differential casing/ axle casing, differential lock levers, end assemblies for axles and parts thereof, end assembly for PTO lever, fork for differential locks, fork for PTO clutch, fork PTO and fork PTO clutch, hand lever for PTO clutch, housing for PTO bearings, joint differential cross/journal pinion carrier, internal lever assembly/ lever relay for PTO control and parts thereof, lever for clutch release / shaft for lever clutch, link rocker, pedal assembly for differential lock (for tractors upto 60 kW), pedal for differential control, plate for differential, PTO lever, rear Axle Housing / casing side final drive and parts thereof, Rear cover for PTO, Rear Wheel Hub (for Tractors upto 55HP), Retainer for PTO Bearing, Selector for PTO Control Lever, Shaft assembly for fork lever and parts thereof, Shaft Lock Fork for differential for Agricultural Tractors of sub heading 8701.9220 and 8701.9320;

 

 

(4)

Built up Non driving axles with hub and brake drums for vehicles of heading 87.02 and         sub    headings    8701.2120,         8701.2140,         8701.2490, 8701.2190,         8701.2290,

8701.2390,    8701.2990,    8704.2219,                    8704.2299, 8704.6030 and 8704.2390: Dust

protection caps for wheel hubs and Wheel hubs for axles for vehicles of heading 87.02 and sub heading 8701.2120, 8701.2140, 8701.2190, 8701.2290, 8701.2390,

8701.2990, 8704.2219, 8704.2299 and 8704.239018

 

(5)

Built up non driving axles, housing rear axle and propeller shaft for vehicles of sub- heading 8701.9220 and 8701.9320; Axle arm for Front Axle, Block pivot for front axle, Block thrust for axle casing, Cap for front hub/ cover hub, center beam assembly/ body front axle, Drag link assembly/ Tie rods, Hub for front wheel, Pivot pin, Spacer for steering knuckle, Spindle front axle/ Steering knuckle for Agricultural Tractors of sub heading 8701.9220 and 8701.9320

8708.7020

---

Road wheels (excluding casted), rims, discs, caps, ornaments and weights for vehicles of heading 87.02 and sub- headings 8701.9220, 8701.9390, 8704.2219, 8704.2299,

8704.6030 and 8704.239018

8708.8020

"---

Pin for shock absorbers (4x2 vehicles only) for vehicles of sub headings 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9040 and 8701.906018

8708.9130

(1)

Radiator other than aluminum core, for vehicles of Heading 87.02 and sub-headings 8701.2120 (4x2 vehicles only), 8701.2190, 8701.2290, 8701.2390, 8701.2990,

8701.9060, 8704.2219, 8704.2299, 8704.2390, 8701.9220 and 8701.932018

 

(2)

Radiator Cap assembly and parts  thereof for Agricultural Tractors of  sub heading 8701.9220 and 8701.9320

8708.9220

---

Silencers, mufflers and exhaust pipes for vehicles of heading 87.02 and sub-headings 8701.2120 (4x2 Vehicles only), 8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.2140,

8704.2219, 8704.2299, 8704.2390, 8701.9220 and 8701.932018

8708.9320

- - - Following parts for agricultural tractors of sub - heading 8701.9220 and 8701.9320

 

(1)

Clutches (with or without driven plates)

 

(2)

Fork for clutch

8708.9420

- - -

(1) Steering wheels (non foamed) and Covers Steering Shafts for vehicles of sub - heading 8704.2219 and 8704.603018

 

(2)

Steering wheels, steering columns (fixed), steering boxes (manual), Cover for

steering column, Cover relay steering box and steering shaft for agricultural tractors of sub - heading 8701.9220 and 8701.9320

 

8708.9910        - - - Following components for vehicles of heading 87.01:

(A)       For vehicles of heading 8701.2120, 8701.2190, 8701.2290, 8701.2390, 8701.2990

and 8701.214018

  1. Battery cover
  2. Fuel tank
  3. Fuel tank bands / supports / brackets / stripes
  4. Outside mirror stay assembly
  5. Pin for mounting leaf springs (4x2 vehicles only)
  6. Retainer / holder for center hearing (4x2 vehicles only)
  7.  

(8)

Stiffener for fly wheel housing (4x2 vehicles only)

(9)

Towing hooks

(10)

Upper pad for front leaf assembly (4x2 vehicles only)

(B)

Following components, of agricultural tractors of sub-heading 8701.9220 and 8701.9320

(1)

Adapter plate / engine mounting bracket

(2)

Adaptor for tachometer drive (for tractors upto 60 kW)

(3)

Air cleaner housing assembly and parts thereof

(4)

Air intake pipes / tubes (for tractors upto 60 kW)

(5)

Anchor for check chain

(6)

Anchor plate

(7)

Angle drive

(8)

Arm for hydraulic lift

(9)

Arm lift ram for hydraulic mechanism

(10)

Balls (Cat I and II)

(11)

Battery retainer assembly and parts thereof

(12)

Brackets excluding those for throttle control, console panel and stop light switch

(13)

Cable for tractors meter / hour meter

(14)

Cam position assembly for hydraulic lift mechanism

(15)

Cap for lift cover

(16)

Chain assembly / adjuster lower link and parts thereof

(17)

Check chain assembly and parts thereof

(18)

Clutch pedal

(19)

Collar pre - cleaner / shield air cleaner (for tractors upto 60 kW)

(20)

Connecting rod for hydraulic mechanism

(21)

Control Beam

(22)

Cooling fan blade

(23)

Cover lift pump for hydraulics

(24)

Cover starter motor

(25)

Deck for fuel tank support

(26)

Deck for mounting seats

(27)

Drip tray

(28)

End implement

(29)

Exhaust elbow

(30)

Fork for levelling

(31)

Front moulding (rubber / plastic)

(32)

Front tube assembly

(33)

Fuel cut off cable (for tractors upto 60 kW)

(34)

Fuel pipes

(35)

Fuel tank assembly and parts thereof

(36)

Guard / protection for alternator

(37)

Head for lubricating oil filter

(38)

High pressure hydraulic pipe

(39)

Hook support for top link

(40)

Hose breather / breather assembly

(41)

Hub / spacer for fan

(42)

Knuckle for hydraulic mechanism

(43)

Leveling assembly shaft and parts thereof

 

Shackles for leaf spring assembly

 

(44)

Lever and cam assembly for hydraulic lift and parts thereof

(45)

Lever for alternator / brace stretcher

(46)

Lever for hand throttle

(47)

Lever for lift control for hydraulic lift

(48)

Lever for plough lifting mechanics

(49)

Lever for relay steering control

(50)

Lever for response control for hydraulic lift

(51)

Lever for steering control

(52)

Lever inner selector for hydraulic lift

(53)

Lever quadrant cross shaft hydraulic mechanism

(54)

Lift rod assembly and parts thereof

(55)

Link assembly control for hydraulic mechanism

(56)

Link assembly for hydraulic lift

(57)

Link for pivot pedal

(58)

Link for PTO clutch

(59)

Lower link assembly

(60)

Packing for fuel tank

(61)

Pad for PTO relay

(62)

Pads for pedals

(63)

Parts of fuel sedimentary assembly

  1. Pin for beam control
  2. Pin for supporting hydraulic mechanism
  3. Piston assembly for hydraulic mechanism and parts thereof
  4. Pivot shaft for hydraulic lift
  5. Plate cover for rear axle
  6. Plate draft response for hydraulic lift
  7. Plate engine lifting / eye engine lifting
  8. Pre cleaner assembly and parts thereof
  9. Protection sheet for starter motor
  10. Pull rod for stopping engine
  11. Quadrant assembly and parts thereof
  12. Radiator elbow
  13. Response cover assembly for hydraulic lift and parts thereto
  14. Retainer for ball
  15. Rocker cove
  16. Rod / shaft for throttle pedal
  17. Sector for draft control
  18. Selective assembly and parts thereto
  19. Shaft / pin for lower lin
  20. Shaft for fuel pump activation
  21. Shaft for ram extension
  22. Shield for bearing set
  23. Shim for fuel tank support
  24. Sleeve for lift control
  25. Spacer for fuel injection pump
  26. Spacer for transmission
  27. Spacer rings for fan blades
  28. Stand pipe for hydraulic lift mechanism
  29. Steering arms
  30. Stop reverse shaft
  31. Strap for fuel tank (for tractors upto 60 kW)
  32. Suction pipe for hydraulic oil
  33. Support / bracket for fuel tank (for tractors upto 60 kW)
  34. Support for foot steps
  35. Support for front axle
  36. Support for lift pump
  37. Support for throttle
  38. Support for vacuum pump drive
  39. Support for water pump
  40. Throttle control

 

  1. Throttle control assembly and parts thereof (for tractors upto 60 kW)
  2. Throttle pedal
  3. Top link assembly and parts thereof
  4. Towing hooks
  5. Track rod adjustor
  6. Tube assembly for rear axle and parts thereof
  7. Water body / elbow water pump
  8. Water inlet / water connection
  9. Water outlet / pipe outlet
  10. Weight for frame
  11. Wrapper assembly and parts thereof

8708.9920        - - - Following components for vehicles of heading 87.02

  1. Accelerator / Brake / Clutch pedal assemblies and parts thereof
  2. Air cleaner housing
  3. Battery cover
  4. Boot for gear shift
  5. Brace for adjusting generator / alternator
  6. Brackets for mounting air cleaner
  7. Brackets for mounting engine (casting and sheet metal)
  8. Brackets for mounting exhaust pipes
  9. Brackets for mounting leaf springs
  10. Brackets for mounting shock absorbers
  11. Fuel tank
  12. Fuel tank bands / supports / brackets / stripes
  13. Hanger for engine lifting
  14. Lever and bracket of stabilizer bar
  15. Mounting support for spare wheel carrier
  16. Pins for mounting leaf springs
  17. Retainer / holder for center bearing
  18. Shackles for leaf spring assembly
  19. Towing hooks
  20. U Bolts for leaf springs
  21. Upper pad for front leaf spring assembly 8708.9950      - - - Following components for vehicles of heading 87.04:

(A)For vehicles of sub- heading 8704.2219 and 8704.603018

  1. Air cleaner housing (sheet metal)
  2. Air intake pipe and its hood
  3. Battery cover
  4. Boot for gear shift lever.
  5. Brace for adjusting generator / alternator
  6. Bracket for mounting air cleaner
  7. Bracket helper spring
  8. Brackets for leaf springs, shock absorbers, exhaust pipes and engine mounting (casting and sheet metal)
  9. Fuel tank
  10. Fuel tank bands / supports / brackets / stripes
  11. Hanger for engine lifting
  12. Outside mirror stay assembly
  13. Pins for mounting leaf springs
  14. Pipe air cleaner to engine
  15. Rod assembly for cabin locking mechanism
  16. Shackles for leaf springs
  17. Stay for cabin entry steps
  18. Towing hooks
  19. U Bolts for leaf springs
  20. Upper pad for front leaf spring assembly
  21. For vehicles of sub - heading 8704.2299

 

  1. Accelerator / Brake / Clutch pedal assembly and parts thereof
  2. Air / vacuum tanks for brakes
  3. Air cleaner housing assembly and parts thereof (sheet metal)
  4. Air intake pipe and its hoods
  5. Battery cover
  6. Brace for adjusting generator / alternator
  7. Brackets for mounting air cleaner, leaf springs, helper springs, shock absorbers and exhaust pipes.
  8. Brackets for mounting engine (casting and sheet metal)
  9. Fuel tank
  10. Fuel tank bands / supports / brackets / strips
  11. Mounting support for spare wheel carrier
  12. Outside mirror stay assembly
  13. Pins for mounting leaf springs
  14. Retainer / holder for center bearing
  15. Shackles for leaf springs assembly
  16. Stiffener for fly wheel housing
  17. Towing hooks
  18. U. Bolts for leaf springs
  19. Upper pad for front leaf spring assembly
  20. For vehicles of sub - heading 8704.2390
    1. Air / vacuum tanks for brakes
    2. Air cleaner housing assembly and parts thereof (sheet metal)
    3. Air intake pipe and its hood
    4. Battery cover
    5. Brace for adjusting generator / alternator
    6. Bracket for mounting air cleaner, leaf springs, shock absorbers (6x2 vehicles only), exhaust pipes and air tanks
    7. Brackets for mounting engine (casting and sheet metal)
    8. Fuel tank
    9. Fuel tank bands / supports / brackets / stripes
    10. Hanger for engine lifting
    11. Mounting support for spare wheel carrier
    12. Outside mirror stay assembly
    13. Pins for mounting leaf springs
    14. Pipe air cleaner to engine
    15. Retainer / holder for center bearing (6x2 vehicles only)
    16. Shackles for leaf spring assembly
    17. Stiffener for fly wheel housing (6x2 vehicles only)
    18. Towing hooks
    19. Upper pad for front leaf spring assembly

 

9025.8030

- - - Temperature gauges and sensors for agricultural tractors of sub - heading 8701.9220 and

 

9026.1010

8701.9320

- - - Following parts for agricultural tractors of sub - heading 8701.9220 and 8701.9320

  1. Fuel gauge
  2. Oil level Indicator
  3. Dipstick/ gauge oil level for engines

 

9029.2012

- - - - RPM meter for agricultural tractors of sub - heading 8701.9220 and 8701.9320

9030.3310

- - - Battery meters for agricultural tractors of sub - heading 8701.9220 and 8701.9320

9106.1010

- - - Hour meters / tractor meters for agricultural tractors of sub - heading 8701.9220 and 8701.9320

 

 

9401.2020

- - -

For vehicles of heading 87.02 and sub-headings 8701.2120, 8701.2140, 8701.2490,

8701.2190, 8701.2290, 8701.2390, 8701.2990, 8701.9290, 8701.9390, 8704.2219,

8704.2299, 8704.6030 and 8704.239018

 

9401.9020

- - -

Seat parts made of foam, head/arm rests and seat frames for vehicles of heading 87.02 and   sub-headings   8701.2140,   8701.9060,   8701.2190, 8701.2290,                                                                         8701.2390,

8701.2990,      8701.9220,   8701.9320,                      8704.2219,   8704.2299,   8704.6030   and

8704.239018

 

 

 
 
 

[C.No. 2(4) II & T-III/06 (Pt)49/2006]

 

 

 

 

 

As amended:

 

(Shahid Ahmad)

Additional Secretary

 

 

1.

S.R.O.1124(I)/2006

-           dated

10.11.2006

2.

S.R.O.498(I)/2007

-           dated

09.06.2007(w.e.f.10.6.2007)

3.

S.R.O.767(I)/2007

-           dated

02.08.2007

4.

S.R.O.561(I)/2008

-           dated

11.06.2008(w.e.f.12.06.2008)

5.

S.R.O.711(I)/2008

-           dated

02.06.2008

6.

S.R.O.491(I)/2009

-           dated

13.06.2009(w.e.f.14.06.2009)

7.

S.R.O.1098(I)/2011

-           dated

16.-12.2011.

8.

S.R.O.576(I)/2012

-           dated

01.06.2012

9.

S.R.O.1403(I)/2012

-           dated

30.11.2012

10.

S.R.O.09(I)/2013

-           dated

04.01.2013

11.

S.R.O.939(I)/2013

-           dated

21.10.2013

12.

S.R.O.609(I)/2015

-           dated

30.06.2015

13.

S.R.O.1189(I)/2015

-           dated

01.12.2015

14.

S.R.O.484(I)/2016

-           dated

29.06.2016

15.

S.R.O.560(I)/2017

-           dated

01.07.2017

16.

S.R.O.936(I)/2019

-           dated

19.08.2019

17.

S.R.O.841(I)/2021

-           dated

30.06.2021

18.

S.R.O.1930(I)/2022

-           dated

18.10.2022

19.

S.R.O.2242(I)/2022

-           dated

12.12.2022

20.

S.R.O.2305(I)/2022

-           dated

20.12.2022

21.

S.R.O.772(I)/2023

-           dated

27.06.2023

 

کیا آپ کو یہ معلومات مفید معلوم ہوئی ہیں؟