EXTRAORDINARY PUBLISHED BY AUTHORITY

ISLAMABAD, FRIDAY, MARCH 21, 2025

PART II

Statutory Notifications (S. R. O.)

GOVERNMENT OF PAKISTAN

PAKISTAN TELECOMMUNICATION AUTHORITY

NOTIFICATION

Islamabad, the 17th January, 2025

 

TABLE OF CONTENTS

1. Short title and Commencement

2. Definitions

3. Terminal Equipment Standards

4. Application

5. Supporting Information

6. All wireless Radio based Terminal Equipment

7. Application Processing and Type Approval Fees

8. Processing of Application by the Authority

9. Grant Type Approval Certificate

10 Issuance of Duplicate Type Approval Certificate and Revision of Existing Type Approval Certificate.

11. Withdrawal of Type Approval Certificate

12. Procedure for issuance of Certificate of Compliance to Technical Standard Compliance

13. Type Approval Register

14. Identity of Terminal Equipment that is type approved by PTA

15. Miscellaneous

16. Repeal and Savings

 

S.R.O. 287(I)/2025.- In exercise of powers conferred under clause (o) of sub-section (2) of section 5 read with section 29 of the Pakistan Telecommunication (Re-organization) Act, 1996 (XVII of 1996), the Pakistan Telecommunication Authority is pleased to make the following regulations, namely:

PART-I Preliminary

1.    Short title and Commencement.- (1) These regulations shall be called the "Type Approval Technical Standards (Amendment) Regulations, 2025".

(2)   These regulations shall come into force with effect from the date of gazette notification.

2.   Definitions.- In these regulations, unless there is anything repugnant in the subject or context:

(a)    "Act" means the Pakistan Telecommunication (Re-organization) Act, 1996;

(b)    "Authority" means the Pakistan Telecommunication Authority established under section J of the Act;

(c)   "Terminal Equipment" means any apparatus directly or indirectly connected  to any network termination point and used for sending, processing receiving intelligence;

(d)   "Applicant" means company/entity/authorized distributor by manufacture  applying  for type approval for terminal equipment  to the Authority;

(e)    "Type Approval Certificate (Certificate)" means the certification that a type/model of terminal equipment conforms to the technical standards prescribed by the Authority;

(t)    "Mobile Device"  means a communication  device, that uses SIMes) (Subscriber Identity Module )/IMEI (International   Mobile Equipment Identity) include mobile phone, tablets, Dongles, Trackers, Smartwatch etc.;

(g)    "Person" means a natural or juristic person who intends to imports PTA approved terminal equipment into Pakistan with the objective of personal use or sale of such equipment,  for connection to a public switched network.

Words and expressions used but not defined herein shall bear the meanings given there in the Act or the Rules.

3.    Terminal Equipment Standards.-{I)  All Terminal Equipment shall conform to the technical standards as prescribed by the Authority from time to time.:

Provided that where the Authority has not prescribed any technical standards for a type of terminal equipment, the technical standards  laid down by following standardization  bodies may be adopted:

a.   lTU Telecommunication Standardization Sector (lTU-T).

b.   European Standards (EN).

c.   The International  Electro-Technical Commission  (lEC) and it's International Special Committee on Radio Interference (CISPR).

d.   The European  Committee for Electro Technical  Standardization (CENELEC).

e.   The European Telecommunications  Standards Institute (ETSI).

f.   Occupational Health and Safety  Assessment  Specification (OHSAS).

g.   International Organization for Standardization (ISO).

h.   Directive 2014/53IEU for Radio Equipment Directive (RED).

1.     IEC 62368 Safety standards.

(2)   The Authority may recognize the test reports issued by world­ renowned laboratories duly accredited by the accreditation council within the originating country.

(3)   All Terminal equipment must also comply with the essential requirements & standards which are as follow:

a.   Interoperability.

b.   Valid International Mobile Equipment Identity Code.

c.    Safety Requirements i.e. Mobile, Handheld devices are required to comply with a Specific Absorption Rate (SAR) limit of2 Watts/Kg of tissue (average over 10 gm) when exposed to a radio frequency (RF) electromagnetic field.

d.   Provided test report(s)  conforming to notified standards must be issued by an accredited laboratory duly registered by the National accreditation council of their country.

PART-ll

Procedure for Type Approval of Terminal  Equipment

4.    Application.-{l)    An application for the type approval of Terminal Equipment shall be submitted to the Authority in the prescribed format as Annex­ A, along with supporting information as specified in regulation 5:

Provided that the Type Approval Certificate may, subject to requirements provided in these regulations, be issued to applicant.


(2)    The application shall be examined and subject to fulfillment  of the requirements provided in these  Regulations and the type approval certificate shall be issued on fulfilment of the same.

a.     If a manufacturer/person intends to obtain type  approval under  it's name, they shall to apply   for   type approval    for  the terminal equipment by  submitting the prescribed application along   with codal  requirements   listed within  these  regulations.

b.     Provided    that   terminal    equipment     model   that   has   been   type approved    by   PTA,   all   persons   shall   be  allowed    to   use   such equipment    for   connection    to   a   Public   Switch   to  Network    in Pakistan  subject  to grant  of certificate  of compliance  (CoC)  by PTA under these regulations.

c.     Provided    further   that   for  each   new   consignment    consisting    of SIMIIMEI  based  mobile  devices  being. imported  in Pakistan  by any person,  an  application   shall  be made  to  PTA  by submitting   IMEI and other  listed  documents   via  PTA  online  portal  system  available at dirbs.pta.gov.pk/drs    or any other  mechanism   prescribed  by PTA from to time.

d.     The   type   approval    applicant    may   appoint    a   local   3rd   partyl representative/consultant     etc.  for  submission   of  the  type  approval and             certificate     of   compliance     to    technical    standards    (CoC) application  and to represent  them at PTA.

e.     For all  SIM/IMEI  based  mobile  devices  including  fixed  or mobile devices,    type   approval    holder   shall   only   use   a   unique   I MEl containing     Type    Allocation     Code    (TAC)     issued    by    GSM Association.

f.    All  type  approval  holders  and   persons  importing  PTA  type approved terminal equipment/mobile devices for sale and market in Pakistan shall ensure that they will establish customer service/ after sales mechanism for facilitation of their customer  and also obtain CoC for parts imported for after sales provision through PTA.

g.    For  devices  operating  in  VHF  frequency bands,  type  approval holder shall ensure that that the equipment is sold to PTA License holders and devices are programmed \\ ithin the allocated frequency band only as per License conditions. Furthermore. a monthly report for such device  sale along with end user and PTA license  details shall be provided to PTA.

h.   For devices operating in HF and UHF frequencies   band, type approval  shall be granted  subject to provision of PTA issued license ana device shall be programmed  within the allocated  frequencies band and output power as per License conditions.

i.    For equipment for  maritime functionality,    Authorization    from Pakistan Maritime Security agencies (MSA) along with issued License from PTA is required.

J.    For module falling under terminal equipment   category shall be granted type approval to be used within a finished product, whereby each specific  module shall require  type approval  and shall be used within the declared finished produ.ct  within the type approval application.

(3)   Provided that any concealment  of material  facts, by the applicant at the time of submitting  application   or thereafter  shall render  the type approval certificate  liable to be cancelled.

(4)   PTA has the right to cancel/suspend   the issued Type Approval Certificate in case the product being imported/sold   is found to  be having manufacturing  faults, hazardous  to health/safety  and not conforming  to standards stated at the time of type approval.

(5)   A  Type Approval application is to  be made for each model separately  and issuance  of the certificate  referred  in sub-regulation  (2) shall be made for one of model of the terminal  equipment   and be stated within the certificate with model name and model number respectively.

(6)   Applicant  is required to submit a sample quantity (I) along with the application  for type approval  to be used for testing  and evaluation  by the PTA. Furthermore,   PTA may return the sample if the applicant will provide the documentary  evidence  from the manufacture  reflecting  manufacturing  price to be more than  USD 2000 within 3  months from issuance of  type  approval certificates.  Any claim after lapse of time duration shall not be entertained.

Note:  Submitted sample may be disassembled  by PTA, to perform internal hardware/PCBA validation/testing etc. as part of technical assessment. Applicant is made aware that such assessment may result in voidance of device warranties by manufacturer and PTA shall not be liablefor it.

(7)   The applicant is  not authorized to  alter/reprogram  or  change description of the type approved equipment unless it is approved by the authority.

(8)   All concerned shall follow the directives, guidelines and standing operating procedure  of the type approval issued from time to time by the Authority.

Go To Top

5.    Supporting Information.--(l)     All applications under regulation 4 shall include following  supporting  information  along with application  request attached as Annex C to these Regulations  and submitted  in soft format e.g. CD/DVDIUSB   etc. or any other format required by authority from time to time.

(a)   Application Form.

(b)   Applicants Undertaking.

(c)   Credentials of the Applicant will be required:

a.   CNIC of Individual.

b.    Registration  from SECP/City   Government!   Registrarl  Firm along with NTN for the local company/organization/entity.

c.    In case of applicant being a foreign entity, the applicant shall provide following documents as part of type approval process issued from their country of origin:

I.      Company Registration.

II.      Authorization from board of directors to apply for PTA type approval.

iii.    Shareholder  details of board of directors of manufacturer of device(s).

(d)    Declaration  of' Conformity by the  manufacturer  reflecting the applied device standards e.g. RF, Safety, SAR, EMC/EMI etc. or any other document required by authority from time to time!

(e)   Detailed test reports for standards reflected within Declaration of Conformity may be asked by PTA as and when required e.g. RF, Safety, SAR, EMC/EMI etc.

(f)    Technical Data Sheet, reflecting Specifications for the device e.g. output power, operating frequency etc.

(g)   Wi-Max terminal equipment,  certification  from Wi-Max forum are to be provided.

(h)   Processing fee (Non-refundable) in USD or equivalent Pak Rupees and Type Approval Certificate issuance fee in Pak Rupees equivalent to amount as stated in Annex B.

(i)   Sample quantity (ONE) of the terminal equipment for applied model. Submitted sample should be  complete in  all  respect including accessories allowing PTA  to  carry  out  technical evaluation  of sample.  In case of an (MEl based sample,  applicant will ensure sample device IMEI is registered as  per DIRBS Regulations prior to submission.

Note: Submitted sample may be disassembled  by PTA, to perform internal hardware/PCBA validation/testing etc. as part of technical assessment. Applicant is made aware that such assessment  may result in voidance of device warranties  by manufacturer and PTA shall not be liablefor  it.

j)    Provision of Type Allocation Code (TAC) details (e.g. GSMA TAC Certificate  or GSMA  T AC Code programmed  on applied model device etc'. from GSMA Association   in case of device offering IMEIISIM   based functionality.   As  part of evaluation of  type approval request PTA will verify applied TAC with GSMA database  and if needed further verification  can be asked directly from GSMA for specific  TAC. Upon approval  of type approval request all GSMA TAC (excluding those TAC is  placed on blacklist  by the Authority)  issued against  the specific model to be included.

(k)    Undertaking  from manufacturer  that device being type approved  is for mass produce consumer purpose only and all native applications installed do not support any customized  in-built encryption  as part of its primary  device functions.  Provided  that PTA reserves  the' right  to  forward  relevant device  information to   concerned government  bodies  for evaluation/clearance   as and when deemed necessary.

(l)    Undertaking   from manufacturer   that sanctity/privacy   of the user data shall be ensured.

(m)   As per part of type approval  evaluation  PTA will perform system­ based checking e.g. operating system, firmware,  output power, programmed  frequencies,  hardware  inside the device as and when required.  PTA may also ask to provide demo of the device to show all the features  programmed  in the devices  and compare the same with submitted  test report.  This demo may be asked in person or through video conferencing  as deemed appropriate.

(n) Any additional supporting information/documents that the Authority may require as part of application evaluation.

6.  All wireless Radio based Terminal Equipment. All terminal equipment  having  wireless  functionality  shall operate  on non-interference basis within the allowed frequency spectrum allowed by PTAIFAB.

7.   Application Processing and Type Approval Fees.-(I) The list of all terminal  equipment  to be type approved by the Authority  along with processing  and type approval fees shall be made available on PTA website (www.pta.gov.pk).

(2)   The applicant  shall pay the application  processing  fee along  with the application  for each type oftenninal equipment.                                                   t

(3)   Provided  that in the case an applicant intends to withdraw  the application   before  the type approval  is granted,  the application  processing  fee shall not  be  refunded, however in  case  of  application denial/withdrawal certification   issuance fee shall be refunded  or adjusted in future application subject  to intimation  by applicant  for refund or adjustment  of fee in future type approval application.

(4)   Provided  further that the type approval  fee shall be charged  upon grant of type approval of the requested terminal equipment.

(5)   The  amount  specified as  Application Processing and  Type Approval  fee is to be deposited  in the name of Pakistan  Telecommunication Authority in a prescribed  bank account.

8.  Processing of Application by the Authority.- Upon   receipt  of application  complete  in all respects  and deposit of prescribed  fee, the Authority shall carry out an initial assessment  to determine  the suitability  for grant of type approval  certificate  and shall allot a reference  number to the applicant  for the purpose offuture  correspondence  and identification  of the application.

Go To Top

Provided that if the application  is incomplete, the Authority  may return the application  to make up the deficiency  within  the given time i.e. 7 working days, failure to provide the same within the stipulated time may lead to denial of the application.

9.  Grant Type Approval Certificate.- (l)       The  Type Approval Certificate  may be issued if the Authority  is satisfied that:

(a)   the application  complies with these Regulations;

(b)     the Terminal/Equipment   fulfills all the relevant  technical  standards/ requirements  as well as provision  of all documents  required  by the authority;

(c)    All fees due under these regulations  have been deposited   in the designated account;

(d)   Type Approval code for IMEI based devices issued by GSMA; and

(e)    Terms  and conditions  of Type Approval  issued  by Authority  and any other directives  issued from time to time.

10.   Issuance of Duplicate Type Approval Certificate and Revision of Existing Type Approval Certificate.

1.    Duplicate Type Approval Certificate may  be  issued by  the Authority  subject to the following:

(a)   Provision of request on type approval  holder company  letterhead;

(b)    Provision  of an undertaking  stating  the reasons  of requirement  of duplicate certificate;

(c)   Deposit of the prescribed  processing fee in Annex  B;

(d)   Copy of Intimation  to PTA of lost/misplaced   original  certificate; and

(e)   Copy of already issued type approval certificate.

2.     Revision of Existing Type Approval  Certificate,

All modifications   in the certified  terminal  equipment,   however  small, shall be assessed by the type approval certificate  holder for the purpose  of compliance  with the prescribed  standards  and approval  from the Authority,  if such change is informed  after lapse of 90 days from issuance  of certificate following shall be provided:

(3)   Provided  that the applicant  shall send full details  of the changes made in the terminal  equipment  along with supporting  diagrams  and processing fee (non-refundable):

(4)   Provided that  the  Authority may require a  test  sample for verification  purposes,

(5)   The applicant/type  approval  holder  shall notify to the Authority,  if any of the information  in the type approval  certificate  that becomes  outdated, which includes but is not limited to:

(a)   the name/address  / contact details of the holder; and

(b)   the name or model number of type approved equipment.

(6)   Updating of  Type approval certificate shall be done through issuance  of Addendum  and incorporating  necessary  changes  in "Type Approval Register"  on the request of the applicant /type approval  holder.

(7)    Incase,  if already  type approved  model has been upgraded  by the manufacturer  and there is no change  in the hardware  but in the software,  it will not require  Type approval  from the Authority,  However,  if the hardware  for the device has been changed  amounting  to modification   of equipment  it shall be considered  to be a new model, the model will require a fresh Type Approval.

Explanation: Examples of such scenarios  can be PCBAlMotherboard hardware change, RAM/ROM variants etc.

(8)   Each ModellVariant  of Terminal  Equipment  will require a separate Type Approval.

(9)   In   case of already type approved  by PTA, where manufacturer/ OEM company  ownership  has been changed,  it shall require  fresh type approval from ,PTA.      .'

PART-III

General  Conditions

11.  Withdrawal of Type Approval Certificate.-    The Authority  may revoke the Type Approval Certificate  at any time on any of the following grounds:-

(a)    If at any stage the type approval  certificate  holder  acts in contrary to these Regulations;

(b)   if the terminal equipment   that has been connected   to a public switched  network  differs  in any way from the original  sample/ test reports submitted at the time of type approval by the applicant; and

(c)   In case the product being imported/sold  is found to be having manufacturing faults,  hazardous  to   health/safety and   not conforming to standards stated at the time of type approval.

12. Procedure for issuance of Certificate of Compliance to Technical Standard Compliance.-( I) The Authority may consider a request for issuance  of certificate  of compliance  to technical  standards  to companies, academia,  government  bodies,  Law Enforcement Agencies (LEA) etc. on non­ commercial and non-interference   use basis and within PTAlF AB  allowed frequency band for following categories:

a.   Research  and Development  (R&D), Test and Trial, Engineering samples/ prototype  imported  for non-commercial  purpose up to quantity  5 for each model/variant  to be used for internal testing purpose  on non-interference  basis and shall not be sold/used  for commercial purpose.

b.   Sample imported  for purpose of type approval for submission to PTA.

c.   Non-terminal  equipment  detained  by customs  authority  requiring technical clarification from Authority.

d.   LEA, Armed forces, Security Agencies SIM based Devices for their organization  official use only (GSMA Valid IMEls) accompanied with tax exemption letter from FBR.

(2)   Applicant  may submit request for above mentioned  category  by submitting document and form reflected in Annex  D.

(3)   The Authority shall upon receipt of request, issue certificate of compliance (COC) verifying the technical standards for Completely Built Units (CBUs) by commercial importers whereas Completely Knocked down (CKDs)/ Semi Knocked Down (SKDs) only by Mobile Device Manufacturer (MDM) having a valid authorization for mobile device manufacturing issued by the Authority. Such imports shall certified for PTA type approved models and subject to issuance of certificate of compliance to Technical Standards for use within PTA/FAB allowed frequency bands (wherever applicable), upon payment of administrative fee(s) revised by the Authority from time to time and made available on PTA website www.pta.gov.pk as per below conditions:

(a)   For SIM/IMEI  based Terminal Equipment/Mobile device(s) on following conditions:

Go To Top

Parameter Details
PTA Type Approved Mobile Devices Device shall be a model which is PTA Type approved
GSMA Type Allocation Code (TAC) IMEI for device(s) shall contain only GSMA issued TAC. No TAC addition will be required for already type approved models in the respective Type approval certificates however all new TAC(s) subsequently notified for the same type approved model and made
available by GSMA shall be added in the Device Identification Registration and Blocking System (DIRBS).
Duplicated/Cloned/Stolen/Counterfeit IMEI Devices that contain duplicated/ cloned/stolen/ counterfeit shall not be considerd for issuance of CoC by PTA.
Undertaking by Applicant 

The person shall provide an undertaking to abide by all Government of Pakistan (GoP) and Pakistan Telecommunication Authority (PTA) policies / rules / directives / regulations and ensure that all imported terminal equipment:

(a) Are operational and functional;

(b) Not altered in any manner, not duplicated, not cloned, not stolen, or counterfeit IMEI(s);

Ensure after-sales support for customers/consumers through a formal agreement for a minimum period of two (2) years.

Apply via PTA online Portal

Person shall apply via PTA online portal link available at dirbs.pta.gov.pk/drs and upload all listed requirement into the portal system including payment of the applicable administrative fee. The uploaded IMEI(s) shall be evaluated technically through PTA
DIRBS and transmitted to FBR WEBOC/PSW for completion of their codal formalities. Upon approval message transmitted via FBR WEBOC/PSW against the submitted IMEI application, whitelisting of corresponding IMEIs shall be done after the sample
verification by PTA. 

The above process shall also be applicable for SKDs/CKDS being imported by MDMs whose device IMEIs will be whitelisted after issuance of COC and converting them into finished products by MDMs.

(b)    For non-SIM/non-IMEI based Wireless Terminal device(s) following is required:

Applicant may submit request by submitting document and form attached at Annex-D.

(c)   For SIM/IMEI based Terminal equipment /Mobile Devices(s) imported by a person for personal use following conditions shall be fulfilled.

Parameter Details
GSMA Type Allocation Code (TAC) IMEI for device(s) shall contain only GSMA TAC excluding placed in blacklist by the Authority.
Duplicated/Cloned/Stolen/Counterfiet IMEI Devices that contain duplicated/cloned/stolen/counterfeit IMEI shall not be allowed for issuance of CoC by PTA.
Quantity Only 5 mobile devices in a calendar year will be allowed for registration
Apply via PTA online Portal Person shall apply via PTA online portal link available at dirbs.pta.gov.pk/drs or USSD
*8484# and upload all listed requirement into the portal system

Note: Foreign Missions, including High Commissions and Embassies, shall submit their Certificate of Compliance (CoC) requests for the import of terminal equipment through the Ministry of Foreign Affàirs (MoFA). PTA shall be only responsible for technical evaluation of IMEI(s) to ensure compliance with GSMA standards. All data pertaining to the authenticity of the note verbal and other documents shall be verified by MoFA prior to submission of case to PTA. Only devices with GSMA-valid IMEI(s) not reported as duplicated/cloned/stolen shall be eligible for registration for a period prescribed by the Authority from time to time."

(4 )   PTA has the right to cancel/suspend   the CoC issued in case the product being imported/sold    is  found to  be  having manufacturing    faults, hazardous  to health/safety  and not conforming  to standards  stated  at the time of grant of COC.

 13.   Type Approval Register.-   The concerned  division  shall  maintain a register  of all terminal  equipment  approved  under  these Regulations  and shall keep it open for inspection  by the authority.

14.   Identity of Terminal Equipment that is type approved by PTA.-(l)       In   order   to   verify   that  the   terminal   equipment   being   sold commercially is a type' approved model, the type approval holder/person will place a verifiable sign (Paper or Electronic embedded within the software) with following details at a minimum on each type approved terminal equipment as follows:

(a) Unique Type Approval number issued by PTA and verifiable reflecting ''Approved by PTA''

(2)   Manufacturer(s),1 distributons) / person / importer(s) / dealer(s) / Retailers  etc.  shall,  specify  through  a  verifiable  sign  (Paper  or  Electronic  embedded within the software) that the terminal equipment.   offered by them is"Approved by PTA".

(3)   Type Approval  holder  using electronic  identification  sign  shall ensure that type approved device equipped with an integrated electronic display screen, or a device without an integrated screen that can only operate in conjunction with a devic~ that has an electronic display screen will show on the electronic display the PTA Identifier that equipment is type approved.

15.  Miscellaneous.-(l)     All Terminal Equipment shall conform to the technical standards  as prescribed  by the' Authority  from time to time.

(2)   Terms and conditions of Type Approval issued by Authority and any other directives issued  from time to time.

(3)    Authority approved exemption list (Annex-E) may be revised from time to time.

 16.   Repeal and Savings.- (1) The Type Approval Regulations, 2019'· and amendments   is~ued in 2019 vide S.R.O are hereby repealed.

(2)   Notwithstanding anything contained hereinbefore, all orders made, actions taken, notifications issued, shall be deemed always·to have been lawfully and validly made, taken, issued, vested or transferred under these regulations and shall continue to  be' in force unless amended, varied, withdrawn,' rescinded or annulled by a person  or authority  competent to do so under these regulations.

Annex_A

 

Annex-B

S. No Type Approval Equipment Categories Type Approval Certificate fee
Local. Manufactured (Pak Rs.) Imported US$
1 Tracking System Devices with SIM/IMEI based functionality, transmitting Location details (e.g. Vehicle Tracking, Smart Watches with SIM/Tracking, Equipment Tracking etc.) 5000 100
2 Satellite Terminal Equipment 5000 100
3 Wireless Radio Trans/Receiver, Repeaters Sets (e.g. VHF, HF, UHF, Two Way Radio, Maritime etc.) 5000 100
4 Terminal Devices operating in ISM as defined PTA ISM band regulations, GNSS within FAB prescribed band & usage conditions etc. 5000 100
5 Short Range Devices (SRD), Ultra-Wide Band (UWB), loT devices, RFID, Bluetooth, Immobilizers, Inductive Loop Systems, smart metering, telecontrol telemetering, Machine to Machine (M2M) etc. as defined in PTA Regulatory Framework for Short Range Devices (SRD) & Terrestrial Internet of Things (loT) Services etc. 2500 50
6 IP Phones, Video Conferencing, VolP Systems, Gateway etc. 5000 100
7 PABX/IP -PABX 5000 100
(For each additional 100 lines) 1000 100
8 SIM/IMEI/Wi-Fi based Mobile Devices e.g. Mobile Handsets, Wi-Fi Tablets, Dongles, Wingles etc. 5000 100

Processing Fee (Non-Refundable)

  • Note: A non-refundable processing fee of PKR 5000 per application for locally manufactured terminal equipment, and a USD 100 non-refundable fee per application for foreign manufactured terminal equipment will be charged for all new applications, amendment in issued certificate & duplicate certificates.
  • For Serial No.5 a non-refundable processing fee of PKR 2500 per processing fee of USD 50 per application for foreign manufactured application for locally manufactured devices and a non-refundable devices shall be applicable.
  • The list of terminal may be revised by the Authority from time to time.

Annex-C

Annex-D

Format and document requirement for issuance of certificate of compliance

S.No. Make of Equipment Model Number Equipment Qty. Purpose of Use details End User Detail Airway Bill No Port name where consignment arrived

(i) Consignee/Applicant Name/ Company Name:

(ii) Postal Address:

(iii) Phone No:

(iv) Email Address:

Following documents are to be included along with request form and emailed at commercialnoc@pta.gov.pk with Subject of email indicating COC for Airway Bill Number, Qty., Make & Model

(a) Commercial Invoice Copy;

(b) Airway Bill Copy;

(c) Technical Literature Copy:

(d) PTA Request form in Word File Format;

(e) End to End Network Connectivity Diagram;

(f) Request for issuance of COC written and signed on company letterhead;

(g) In case of SIM based devices provide IMEI numbers for each device; and

(h) Administrative Fee Submission Proof.

Note: Issued CoC letter will be dispatched at provided postal address in application form.

Annex-E

Authority Approved List of Items exempted from Type Approval/NOC

S.No. Equipment Name

1.

Networking Equipment (Switches, Firewalls, Servers, Storage Devices)
2. Laptops /Desktops (Non-Sim based only)
3. GPS only devices

 

ERUM LATIF,

Director  (Law & Regulations).

Go To Top

Measures / Standards
# Name Type Agency Description Law Valid To Apply To
1 Type Approval Certificate of SIM based Terminal Devices سرٹیفکیٹ کی شرائط Pakistan Telecommunication Authority Type Approval Certification of Terminal Equipment (i.e. Equipment that offers Switching, Transmit/Receive Tx/Rx functionality and can connect to Public Switch Networks directly/indirectly) is an official certificate issued by Pakistan Telecommunication Authority (PTA) for each model/equipment under PTA Type Approval Regulations 2021 Type Approval Technical Standards (Amendment) Regulations,2025 9999-09-09 ALL
2 Certificate of Compliance to Technical Standards for PTA Type Approved Devices having IMEI/SIM functionality سرٹیفکیٹ کی شرائط Pakistan Telecommunication Authority As per PTA procedures, any terminal equipment having SIM/IMEI-based functionality e.g. Mobile Phone, Tracker, Tablet, Point of Sale machine, etc. which has already been type-approved by PTA requires only obtaining CoC for such devices via online portal link dirbs.pta.gov.pk/drs which is integrated with FBR Weboc. Type Approval Technical Standards (Amendment) Regulations,2025 9999-09-09 ALL
3 Certificate of Compliance to Technical Standards for Non-SIM based Terminal Devices سرٹیفکیٹ کی شرائط Pakistan Telecommunication Authority Certificate of Compliance (CoC) to Technical Standards for a non-sim-based terminal device is issued by PTA for any model which is already type-approved. Such CoC requests can be filed using online email mechanism by submitting the application form available at link https://www.pta.gov.pk/en/industry-support/industry-services/type-approval/coc-information-081220 Type Approval Technical Standards (Amendment) Regulations,2025 9999-09-09 ALL
کیا آپ کو یہ معلومات مفید معلوم ہوئی ہیں؟