EXTRAORDINARY

PUBLISHED BY AUTHORITY ISLAMABAD,

TUESDAY, JUNE 30,1998

PART II

(Statutory Notifications (S.R.O.)

GOVERNMENT OK PAKISTAN

MINISTRY OF FOOD, AGRICULTURE AND LIVESTOCK (Livestock and Agriculture
Research Wing)

NOTIFICATION

Islamabad, the 30th June, 1998

S.R.O. 739 (I)/98.—In exercise of the powers conferred by section 18 (1) of the Pakistan Fish Inspection and Quality Control Act. 1997, the Federal Government is pleased to make the following rules, namely:—

1. Short title and commencement. - These rules shall be called the Pakistan Fish Inspection and Quality Control Rules, 1998.

2) They shall come into force at once.

2. Definitions: - In these rules, unless there is anything repugnant in the subject or text:-

1) "Act" means the Pakistan Fish Inspection and Quality Control Act, 1997 (XXXV of 1997);

2) "approval/certification number" means certificate with a number issued by the competent authority for catching, picking, relaying, purification and processing fish and fishery products;

3) "aquaculture products" means all aquatic animals including fish, shrimp and bivalve etc. and plants including seaweed etc. and their products reared, in aquatic environment in controlled conditions and harvested as a foodstuff for human consumption

4) "bivalve molluscs" means filter feeding lamillibranch mollusks;

5) "chilling" means the process of cooling aquaculture products to a temperature close to that of melting ice;

6) "clean sea water" means sea water or brackish water which is free from microbiological contamination and harmful substance and/or toxic marine plankton in such quantities which may affect health quality of fish and fishery products;

7) "competent authority" means Marine Fisheries Department, Ministry of Marine Maritime Affairs, Government of Pakistan;

8) "consignment" means the quantity of fish and fishery product bound for one or more customers in the country of destination and conveyed by one mean of transport (i.e. those parts set aside for goods in automobile vehicle, air craft, the hold of vessel, and container for transport by land, sea or air);

9) "cold Water" means water where monthly mean low water temperature is normally 15 degrees Celsius or less;

10) "critical point" means a point, step or procedure at which control can be applied and a safety hazard can be prevented, eliminated or reduce to acceptable level;

11) "critical limit" means the extreme limit acceptable with regard to food safety, associated with critical point either of physical and/or biological and/or chemical nature, to control and to prevent occurrence of food safety hazard;

12) "establishment" means any premises where - fish or fishery products are prepared, processed, packaged or stored;

13) "factory vessel" means any vessel on which fish or fishery products are processed and packaged by the processor;

14) "food safety hazard" means any biological, chemical or physical hazard that may cause fish or fishery product unsafe for human consumption;

15) "forms" means forms appended to these rules;

16) "fresh fish" means any fish or fishery products whether whole or prepared, including products packaged under vacuum or in a modified atmosphere which has not undergone any treatment to ensure preservation other than chilling;

17) "frozen fish" means fish or fishery products which has undergone a freezing process until the core of fish and fishery products attains temperature -18 C or lower;

18) "health certificate" means a certificate required by the importing country for export ·of fish and fishery products from Pakistan;

19) "Inspection Committee for aquaculture establishment" means a committee constituted under rule 6(A) of these rules;

20) "marine biotoxins" means poisonous substances accumulated by aquatic animals feeding on plankton containing toxin;

21) "packaging" means the procedure of protecting any fishery product by a wrapper, a container or any other suitable device;

22) "potable water" means any water which is free from microbiological contamination, harmful substances or any toxic material affecting the health and quality of fish or fishery products;

23) "processed fish" means any fish or fishery products which has undergone a chemical or physical process such as heating, smoking, salting, dehydration or marinating etc. of "chilled or frozen product whether or not associated with other food stuff or combination of these various processes;

24) "preserve" means the process whereby fish or fishery products are packaged in hermetically sealed container and subjected to heat treatment to the extent that any microorganisms that might proliferate are destroyed or Inactivated irrespective of temperature at which products to be stored;

25) "preventive measure" means physical, chemical or other factors that can be used to control food safety hazard;

26) "Registration Certificate" means a certificate granted for registration of fish processing plant or fish exporter, fish farm, hatchery or feed mill under these rules;

27) "Registration Authority" means a Fishery officer authorized by the provincial  and local competent authority, by an order in writing, to register fish processing plant under Pakistan Fish Inspection and Quality Control Act, 1997 or these rules,

28) "rules" means these rules made under Pakistan Fish Inspection and Quality Control Act, 1997;

29) "Schedule" means schedule to these rules;

30) "Table" means Table to these rules;

31) "aquaculture" means the cultivated/managed production in natural/artificial enclosures of aquatic organisms which are used for human consumption and includes the production of intermediate stages of the life cycle including eggs and larval stages of fish and plants;

32) "aquaculture establishment" means a place i.e., hatcheries, fish farms, ponds, silos, tanks, pens, cages raceways, cold storage etc. where fish breeds, reared, fattened, manufactured and farmed for aquaculture production which serves as raw material for export industry;

33) "Hatcheries" mean fish and shrimp hatcheries where breeding of animals occur to produce seed, babies for further rearing, production, fattening at hatcheries or aquaculture establishments;

34) "feed mills" mean factories to produce fish and shrimp feed or any of its ingredients to be used as input for aquaculture production including the forms like fish meal, pellet, granule, powder, mash in sinking or floating form;

35) "aquaculture feed" means any substance or product, including additives, whether processed, partially processed or unprocessed, intended to be used for oral feeding in fish culture systems producing fish for human and animal consumption;

36) "formulated feed" natural or artificial and its additives provided to aquaculture animals, including larval stages;

37) "aquatic organism" means any an individual animal, plant, or single-celled life form reared in water ecosystem whether natural or artificial bodies;

38) "farm" means area of landing and its buildings, used to grow crops and rearing animal;

39) "seed" means aquatic organism after hatching to juvenile stage procured from hatchery or natural habitat;

40) "federal competent authority" (FCA) means Marine Fisheries Department, Ministry of Maritime Affairs, Government of Pakistan;

41) "provincial or regional competent authority" (PCA/RCA) means Department of Fisheries Government of Punjab, Fisheries Department Government of Sindh; Fisheries Department Government of Balochistan; Directorate of Fisheries Government of Khyber Pakhtunkhwa; Fisheries Department Government of Gilgit-Baltistan and Wildlife and Fisheries Department Government of AJK;

42) "local competent authority" (LCA) mean the authorized officer or officers of fisheries departments at district and divisional levels in Punjab, Sindh, Balochistan, Khyber Pakhtunkhwa, Gilgit-Baltistan and AJK;

43) "aquaculture traceability" means the ability to trace and follow an aquaculture product, fish, seed, babies, feed or other substance intended or expected to be incorporated into an aquaculture product or aquaculture feed, through all stages of production, processing and distribution;

44) "withdrawal period" means the period necessary between the last administration of the veterinary me_dicinal product to animals under normal conditions of use and the production of foodstuffs from such animals, in order to ensure that such foodstuffs do not contain residues in quantities in excess of the maximum limits laid down in importing country legislation;

45) "raw material" means freshly harvested aquatic organism;

46) "production" means the quantity of seed or babies, fish, and feed produced at aquaculture establishment, hatchery or feed mill annually;

47) "disinfection" means the application of hygienically satisfactory chemical or physical agents and processes to clean surfaces with the intention of eliminating micro-organisms;

48) "inspection" means inspection of aquaculture establishment, hatchery or feed mill by a fishery officer for the purpose of assessing the quality of the aquaculture establishment, hatchery or feed mill by inspecting sanitary and hygienic condition and the physical, chemical and bacteriological examination of fish and fishery products;

49) "aquaculture establishment registration certificate" means a certificate granted for registration of aquaculture establishment under these rules;

50) "hatchery registration certificate" means a certificate granted for registration of fish or shrimp hatcheries under these rules;

51) "feed mill registration certificate" means a certificate granted for registration of feed mill for specific feed codes, under these rules;

52) "verification" means verification of aquaculture establishment, hatchery or feed mill registration by respective provincial and regional department;

53) "national residue control plan" mean an effective and uniform program for the monitoring and control of illegal substances or incorrect use of authorized substances in fish or its products intended for human consumption approved and implemented by the Director General of Marine Fisheries Department from time to time on importing country requirements;

54) "residue" mean a residue of substances having a pharmacological action, of their metabolites and of other substances transmitted to animal products and likely to be harmful to human health;

55) "unauthorized substances or products" mean substances or products prohibited under importing country legislation

56) "illegal treatment" mean the use of unauthorized substances or .products or the use of substances or products authorized under importing county legislation for purposes or under conditions other than those laid down in those legislation or, where appropriate, in the various national legislation;

57) "Official sample" mean a sample taken by the competent authority which bears for the purposes of examination of the residues or substances under National Residue Control Program (NRCP);

58) "non-compliant result" means the analytical results exceeding the permitted limits is "non-compliant". The result of an analysis shall be considered non-compliant if the decision limit of the confirmatory method for the analyte is exceeded;

59) "non-compliant sample" means a sample that has been , analyzed for the presence of one or more substances and failed to comply with the legal provisions for at least one substance;

60) "maximum residue limit" means the maximum concentration of residue resulting from the use of a veterinary medicinal product, which may be legally permitted or recognized as acceptable in or on a food;

61) "notified laboratory or approved laboratory" mean a laboratory approved by the competent authority for the purposes of examining an official sample in order to detect the presence of residues;

62) "batch of animals" mean a group of animals of the same species, in the same age range, reared on the same holding, at the same time and under the same conditions of rearing; and

63) "fish landing sites" means place at which fishing or transport vessels discharge a catch fish to land; and

64) "Registration Authority" means a Fishery officer authorized by the Director General, by an order in writing, or through delegation of power to register fish processing plant under Pakistan Fish Inspection and Quality Control Act, 1997 or these rules.

To the top

3. Purpose.- The purpose of these rules is to promote export of fish and fishery products by improving handling and processing practices in respect of health requirements and to ensure quality products for the consumers. To effectively monitor the compliance under these rules under all stages of production, sale, transportation etc.

4. Basis of compliance: It is the primary responsibility of the seafood industry to ensure that the fresh, frozen and processed products intended for export and domestic consumption are handled, processed at all stages of production, storage and transport under proper hygienic conditions so as to meet the health requirements laid down under these rules and that the products conform to the specifications given in these rules. Competent Authority will ensure that:

i) Any statutory restrictions imposed by the Government from time to time with respect to commercial/ environmental/ conservation measures shall strictly be adhere to.

ii) Fish or fishery products must be free of contamination with microorganisms and handled hygienically to avoid subsequent decomposition and contamination to ensure quality of fish and fishery products;

iii) Fish or fishery products must be deheaded and gutted, if possible from technical and commercial point of view. Deheading and gutting must be carried out as quickly as possible after the fish or fishery products are landed;

iv) Fish to be exported alive must be kept under most suitable survival conditions;

v) Live bivalve molluscs must be produced, handled and processed as per conditions required by importing countries;

vi) Fish or fishery product must be handled under hygienic conditions on board the fishing vessel as per conditions laid down in Annexure-I.

vii) Factory vessels must have processing facility as laid down in Annexure-II.

viii) Wholesale fish market must be maintained to comply with the requirements as laid down in Annexure-III;

ix) Specification for fresh, frozen and processed fish and fishery products shall be:

(a) scheduled national standards of the importing countries; or

(b) Contractual specifications agreed to between the buyer and the exporter provided the same is satisfying the health and other requirements of the importing countries; or

(c) the minimum specifications as given in these rules as Schedule-1; or

(d) in the case of any fresh, frozen and processed fish and fishery products for which no standard is available, the standard formulated by the Inspection Committee shall be made applicable.

x) The fish and fishery products must be handled and where appropriate packaged, prepared, processed, frozen, defrosted, or stored hygienically in approved establishment, in accordance with Annexure-IV;

xi) The processors must use potable water for processing fish and fishery products as per criteria laid down in Schedule-II;

xii) All processing plant and fish exporters shall get themselves registered with registration authority as per Clause 3 and 4 of the Act. Conditions for registration certificate for fish processing plant, firm or fish exporter, are given in Annexure-VI.

In addition, all ice plants intending to supplying ice to fishing boats, fish processors and other fishery establishments shall get themselves registered with registration authority.

xiii) Condition for issuance of certificate of quality and origin are given in Annexure-VI;

xiv) Shrimp peeling sheds shall get themselves registered with registration authority and must be maintained to comply with the requirements as laid down in Annexure-IV;

xv) Processing plants and exporters shall abide by the provisions of the Pakistan Fish Inspection and Quality Control Act, 1997 and the rules made thereunder;

xvi) Chemicals, disinfectants, cleaning material, additives, preservatives and cryoprotectants etc. shall be registered with competent authority and no processing plants/establishment should use unregistered chemicals, disinfectants, cleaning material, additives, preservatives and cryoprotectants etc. in their establishment;

xvii) Laboratories have adequate facilities to analyze seafood for microbiological and chemical contaminations will be registered by the competent authority provided they adhere to good laboratory practice. Results of any test obtained by any establishment will be acceptable to Competent Authority provided it is sampled and analyzed by such approved laboratory.

xviii) The fresh, frozen and processed fish and fishery products shall be subjected to:

a) They must have undergone health checks in accordance with conditions laid down in Annexure-VII.

b) They must have been appropriately packaged in accordance with conditions laid down in Annexure- VIII;

c) They must have given an identification mark in accordance with conditions laid down in Annexure-VIII;

d) They must have been stored and transported under satisfactory conditions of hygiene as laid down in Annexure-IX.

xix) The aquaculture products shall be subjected to following conditions:

a) They must. either be made head-on, shell-on shrimp or beheaded, de-shelled,' gutted, cleaned, deviened etc. under proper conditions of hygiene;

b) They must not have been soiled with earth, slime, or feaces or otherwise contaminated;

c) If not processed immediately after having been pre-processed they must be chilled;

d) The must comply with appropriate requirements laid down under these rules (4i to 4 xviii);

e) the levels of veterinary medicines and other environmental contaminants are analyzed and their levels are less than those permitted by importing countries;

f) they must comply with the "National Residue Control Plan" notified in the official Gazette by the Director General of Marine Fisheries Department, from time to time".

5. Export Restriction: Following fish and fishery products will be totally forbidden for export and domestic consumption:

a) Fishes belonging to families Tetraodontidae. Molidae. Diodontidae and Canthigasteridae

b) Fish and fishery produces containing biotoxins such as ciguatera toxin, paralytic shellfish poison, diarrahetic shellfish poison etc.

c) Aquatic turtles, tortoises, snakes, mammals including dugongs, dolphins, porpoises and whales etc.

To the top

6. Inspection by competent authority.-

i) As per Clause 6 (1) of the Act, the Fishery Officer shall carry out inspection and monitoring of the processing establishments regularly and they shall have free access, to all parts of establishments to ensure compliance of these rules.

ii) Having satisfied itself that the establishment/factory vessels meet the requirements with regard to the nature of activities they carry out, the competent authority shall accord approval to such establishment/factory vessels. If the establishment/factory vessel decides to carry out activities other than those for which it has received approval, specific approval from the competent authority shall be obtained for that purpose.

iii) In case inspection and monitoring reveals that the requirements of hese rules are not being complied with, the competent authority shall take appropriate action and formulate specific measures for adoption and implementation;

iv) Establishment will take all necessary measures to ensure that specification of these rules are complied with at all stages of production of fish and fishery products. They must carry out their ‘own checks' based on the requirements given in Annexure-X. They must maintain and implement a written HACCP Plan, duly approved by competent authority to prevent food safety hazard likely to occur in a manufacturing process.

v) The establishment shall have competent and qualified technologist(s) duly approved by the competent authority to conduct its 'own checks' and allied duties.

6A. Constitution of Inspection Committee for Registration of aquaculture establisbments.- Fisheries Departments of Provincial Governments and other regions not forming part of any province shall constitute an inspection committee for registration of aquaculture establishments (hatchery, fish farm and feed mill) consisting of one deputy director and one assistant director at each district or division level of the province or area under the power delegated by the federal competent authority in pursuance of section 17 of the Act.

6B. Inspection by competent authority of aquaculture establishments.-(1) As per rule 6A, the fishery officer designated by provincial or regional fisheries departments under power delegate by the federal competent authority under section 17 of the Act, shall carry out inspection and monitoring of the aquaculture establishments (hatchery, fish farm and feed mill) regularly and they shall have free access, to all parts of aquaculture establishments, hatcheries and feed mills to ensure compliance of these rules and Act.

(2) Having satisfied itself that the aquaculture establishments (hatchery, fish farm and feed mill) meet the requirements with regard to the nature of activities they carry out, the provincial or area competent authority shall accord approval of such aquaculture establishments (hatchery, fish fann and feed mill). If these aquaculture establishments (hatchery, fish farm and feed mill) decide to carry out activities other than those for which it has received approval, specific approval from the provincial competent authority shall be obtained for that purpose.

(3) In case inspection and monitoring reveals that the requirements of these rules are not being complied, provincial and regional competent authority as the case may be, shall take appropriate action and formulate specific measures for adoption and implementation.

(4) Aquaculture Establishment, hatchery and feed mill shall take all necessary measures to ensure that specifications of these rules are complied with at all stages of production of feed, fish seed or fish and fishery products. They must carry out their 'own checks system' based on the "Good Aquaculture Practice'.' (GAP) for fish · or shrimp farming and hatchery operation and '~Good Manufacturing Practices" (GMP) for fish feed production for which, the aquaculture establishments (hatchery, fish farm and feed mill) shall develop and submit to provincial fisheries departments their manual of GAP and GMP for approval and verification. Fisheries Development Board (FDB) may help the aquaculture establishments, hatcheries and feed mills to develop GAP and GMP manuals and shall provide trainings to fish farmers, hatchery operators and feed manufactures for preparation and implementation of GAP and GMP (as specified in Schedule V).

8. Registration of fish processing plant, firm or fish exporter.-

i) No person, firm or fish exporter shall operate fish processing plant until and unless the processing plant is registered with this registration authority;

ii) No processing plant shall export fish or fishery products until or unless it is registered with the registration authorityes;

iii) No processing plant shall procs or allowed to export any other category of produce(s) except for which it is registered.

8A. Registration of aquaculture establishments (hatchery, fish farm and feed mill).-(1) No person shall export aquaculture products for human consumption from Pakistan unless they are produced in an aquaculture establishments (hatchery, fish farm or feed mill) and have utilized the seed and feed produced by the registered hatcheries and feed mills in accordance with a registration permit granted under these rules and regulations by the Director General of the four Provincial - Fisheries Departments (Punjab, Sindh, Balochistan and Khaybar· Pakhtunkhwa) or Director of the Regional Fisheries Departments (AJK and GB) respectively under delegation of power as ibid. The batch of products/commodity harvested/collection from such establishments may be certified/approved by respective federal department on the recommendations of provincial/ regional fisheries departments for export only.

(2) Every aquaculture establishments (hatchery, fish farm or feed mill) shall satisfy the conditions contained in National Residue Control Plan unless otherwise specified in the permit authorized by competent authority i.e. provincial and regional competent authority.

(3) No aquaculture establishments (hatchery, fish farm and feed mill) shall export feed, seed, fish and fishery products unless it is registered by the registration authority i.e. provincial and regional competent authority.

(4) No aquaculture establishments (hatchery, fish farm and feed mill) shall process or allowed to export any other category of product except for which it is registered;

9. Issuance of registration certificate.-

i) Any person, firm or fish exporter intending to operate a fish processing plant or export fish, shall make an application in form "A" (Annexure-XI) to the registration authority for registration prior to the commencement of operation.

ii) The registering authority may after satisfying itself that the applicant has fulfilled all the requirements of the Act and these rules, issue registration certificate in form “B" (Annexure-XI) on payment of requisite fee specified under Schedule-III otherwise a refusal registration will be conveyed as per form "B-l". The registration authority shall draw up a list of approved establishments/factory vessels, each of which shall have an official number and the competent authority shall notify in official gazette the list of approved establishment/ factory vessels and any subsequent changes therein from time to time.

iii} The form of application for registration certificate shall be made available to the intending firm, fish exporters on payment of Rs. 100/-each.

iv) The inspection and monitoring of establishment/ factory vessel shall be carried out regularly by the responsibility of the competent authority which shall, at all times, have free access to all parts of the establishment/factory vessel and records pertaining to application of these rules in order to ensure compliance with the requirements of these rules.

9A. Issuance of registration certificate for aquaculture establishments (hatchery, fish farm or feed mill).- (1) Any person, firm or company intending to operate aquaculture establishment, hatchery or feed mill shall make an application in form A-1 respectively for the registration of aquaculture establishments (hatchery, fish farm or feed mill).

(2) The provincial or regional registering authority as the case may, be after satisfying itself that the applicant has fulfilled all the requirements of the Act and these rules under schedule IA, IIA and V respectively, issue registration certificate in form B-2 (Annexure-X) on payment of requisite fee specified under Schedule-Ill-A otherwise a refusal registration shall be conveyed as per form H1. The provincial or regional registration authority as the case may be shall draw up a list of approved aquaculture establishments, hatcheries and' feed mills under their jurisdiction, each of which shall have an official number and the provincial and regional competent authorities shall communicate the lists to federal competent authority which shall notify in official gazette the list of approved aquaculture establishment and any subsequent changes therein from time to time.

(3) The inspection and monitoring of aquaculture establishments (hatchery, fish farm or feed mill) shall be carried out regularly and the responsibility of the regular inspection of registered fish farms rests with Federal, provincial or regional competent authority through their fishery officer(s) designated by Fisheries Departments under power delegated by competent authority under section 17 of the Act which shall, at all times, have free access to all parts of the aquaculture establishments and records pertaining to application of these rules in order to ensure compliance with the requirements of these rules.

(4) ,operators of aquaculture establishments (hatchery, fish farm or feed mill) shall collaborate with the federal, provincial and regional competent authority on actions taken to investigate, avoid or reduce risks posed by any product which they have supplied or intent to be supplied.

10. Validity of registration certificate. - The registration certificate shall be valid for the calendar year or any part thereof during which it is issued.

11. Cancellation of registration certificate. -

i) Where any processing plant or fish exporters have contravened or failed to comply with the provision or provisions of this Act or the rules in respect of fish processing and its quality, the registering authority may cancel or suspend the registration certificate and inform the concerned party in writing as per form “C” (Annexure-XI).

ii) Where any processing plant or fish exporter contravenes any condition of the registration certificate, the registering authority, without prejudice, may take action under Section-11 of the Act after giving him an opportunity to show cause, and cancel the registration or suspend its operation for a specified period.

iii) Any processing plant or fish exporter whose registration is canceled, may apply on form "A" for re-registration after rectification of the deficiencies/ conditions under the provisions of the Act, for which registration was canceled.

11A. Cancellation of registration certificate for aquaculture farms.--{1) Where any registered aquaculture establishments (hatchery, fish farm or feed mill) have contravened or failed to comply with the provision or provisions of the Act or these rules in respect of fish production and its quality, the registering authority may cancel or suspend the registration, certificate and inform the concerned party in writing as perform "C-1" (Annexure-X).

(2) Where any registered fish farm, hatchery or feed mill contravenes any condition of the registration certificate, the concerned federal, provincial or regional registering authority may take action under section 11 of the Act after giving him an opportunity to show cause, and cancel the registration or suspend its operation for a specified period.

(3) Any aquaculture establishments (hatchery, fish farm or feed mill) whose registration is cancelled may apply on form "A-1" for re-registration after rectification of the deficiencies or conditions under the provisions of the Act, for which registration was cancelled.

12. Renewal of registration certificate. - Registration certificate may be renewed if the holder thereof makes an application in the form "E" (Annexure-XI) within one month after expiry of its period, after depositing annual renewal fee alongwith prescribed late fee as specified in the Schedule-Ill.

12A. Renewal of registration certificate for aquaculture establishments (hatchery, fish farm ·or feed mill) Renewal of the: Registration certificate shall be renewed by concerned competent authority on the recommendation of the Assistant Director of the District on the day of 1st May of every year within one month after expiry of its period, after depositing annual renewal fee along with, prescribed late fee as specified in the Schedule-III-A.

13. Issue of duplicate copy of registration certificate. - The registration authority may issue a duplicate copy of a registration certificate, on receipt of an affidavit to this effect and payment of a fee of Rs. 5,000/- in case the original is lost, damaged or defaced.

14. Registration certificate not transferable. – Registration certificate is not transferable.

15. Production of registration certificate. - The registered plant and fish exporter shall, on demand made by the registration authority, Fishery Officer or any other officer authorised in writing in this behalf, produce the registration certificate for inspection.

To the top

 

16. Supply of fish export data etc. -

i) The registered plant and fish exporter shall furnish to the registration authority or any Fishery Officer the information on form "E" (Annexure-XI) regarding the activities i.e. fish and shell fish processed and exported during the previous month, by the first week of each month.

ii) Every registered plant and exporter shall furnish such information or data as may be required by the registration authority or Fishery Officer.

17. Certificate of quality and origin. - Every registered fish processing plant/exporter shall obtain certificate of quality and origin from Marine Fisheries Department, Ministry of Food, Agriculture & Livestock, Government of Pakistan, after inspection of fish consignment intended for export.

17A. Traceability certificate for aquaculture products: Every registered aquaculture establishments (hatchery, fish farm or feed mill) or exporter shall obtain a traceability certificate for aquaculture products from provincial and regional area competent authority after inspection of fish harvest intended for export.

17B. Certificate of quality and origin: Every registered fish processing plant, exporter and farmer shall obtain certificate of quality and origin for consignment of aquaculture products intended for export, from Marine Fisheries Department, Ministry of Maritime Affairs, Government of Pakistan, after submission of copy of Traceability certificate as issued under rule 17 A;

18. Issue of certificate of quality and origin for export of fish and fishery products. -

i) The registered fish processing plant/exporter intending to export fish and fishery products shall make an application in form "F" (Annexure-XI) to the Director General, Marine Fisheries Department, Ministry of Food, Agriculture & Livestock, Government of Pakistan, or authorized officer of Marine Fisheries Department, Ministry of Food, Agriculture & Livestock, Government of Pakistan for issue of the required certificate on payment of such fee as prescribed under Schedule-IV.

ii) The competent authority after inspection of the fish and fishery products and being satisfied with the quality of the consignment may issue certificate of quality and origin/health certificate on form "G" (Annexure-XI) otherwise, in case of rejection of the consignment, the firm or the fish exporter shall be informed as per form "H" and the amount for the certificate deposited shall be forfeited.

iii) The competent authority may issue any other certificate confirming quality and/or origin on special request or as per requirement of documentation of importing country. Such certificate shall be valid for export of fish consignment for which it is granted.

iv) The certificate of quality and origin/health certificate shall be valid for shipment upto 5 days from the date it is issued. After validity period the certificate of quality and origin/health certificate will stand canceled and the fish exporter has to apply afresh.

18A. Issue of traceability certificate for export of aquaculture-based fish and fishery products.-(1) The registered fish farmer /exporter intending to export fish and fisheries products shall make an application in Form-F1 (annexure-10) to the provincial and local competent authority or authorized officer of the concerned Fisheries Department for issuance of traceability certificate on payment of such fee as prescribed under Schedule-IV-A.

(2) The provincial arid regional competent authority after inspection of the harvesting operation and being satisfied with the quality of the product may issue a traceability certificate on Form G-1 (annexure-10), otherwise, in case of rejection of the product, the farmer or the fish exporter shall be informed as per form "H 2" ,and the amount for the certificate deposited shall be forfeited.

(3) The provincial and local competent authority shall issue a traceability certificate on Form G-1 in five copies for (1) farmer, (2) trader, (3) processor or exporter, (4) provincial fisheries office and (5) district firsheries office.

18B. Issue of quality or origin/health certificate for export of aquaculture-based fish and fishery products.-(1) The registered fish farmer, processor or ·exporter intending to export fish and fishery products from aquaculture source shall make an application in form "F2" to the Director General, Marine Fisheries Department, Ministry of Maritime Affairs, Government of Pakistan, or authorized officer of Marine Fisheries Department, Ministry of Maritime Affairs, Government of Pakistan for issuance of the certificate of quality and origin or health certificate for aquaculture products on payment of such fee as prescribed under Schedule-IV-A.

(2) The federal competent authority after review of the copy of traceability certificate issued -by Provincial or regional competent authority issued under rule 17 A and being satisfied with the quality of the consignment may issue certificate of quality and origin or health certificate for aquaculture products on form "G 2" otherwise, in case of rejection of the consignment, the farmer, firm or the fish exporter shall be informed as per form "H2" and the amount for the Certificate deposited shall be forfeited.

(3) The competent authority may issue any other certificate confirming quality or origin on special request or as per requirement of documentation of importing country. Such certificate shall be valid for export of fish consignment for which it is granted.

(4) The certificate of quality and origin or health certificate shall be valid for shipment upto five days from the date it is issued. After validity period the certificate of quality and origin or health certificate shall stand cancelled and the fish exporter shall have to apply afresh.

18C. National Residue Control Plan.-(1) Any person, fish farmer, firm or company intending to operate, aquaculture establishment shall comply with the National Residue Control Plan.

(2) The Director General, Marine Fisheries Department shall, after the consultation of provincial department notify in official Gazette the "National Residue Control Plan" in the shape of NRCP document on annual basis.

(3) The NRCP document shall contain objective statement, scope and implementation mechanism, data of registered fish farms, hatcheries and feed mills related to export of aquaculture products, notified laboratories for sample analysis, sampling strategy including its transportation, handling and analysis, list of substance to be monitored and their maximum residue limits, test results and follow up actions in case of noncompliance and history NRCP compliance during the last year.";

19. Fish Inspection. -

i) The competent authority after receipt of form “F" from the registered exporter, shall depute a Fishery Officer for the purpose of undertaking inspection of fish consignment.

ii) The competent authority shall undertake inspection of fish and fishery products and select representative samples from the consignment at random for laboratory analysis and examination in the Marine Fisheries Department.

20. Quality Control of fish and fishery products. - Fish and fishery products shall conform to quality criteria for fish and shall fish as indicated in Schedule-1 and Annexure-VIII.

20A. Quality control of fish and fisheries products of aquaculture origin.-The aquaculture products shall comply with. all provisions of the "National Residue Control Plan" as notified by the Director General, Marine Fisheries Department after the consultation by provincial and regional competent authorities and implemented by Fisheries Departments in Punjab, Sindh, Balochistan, Khyber Pakhtunkhwa and other regions.";

21. Re-inspection for issue of certificate of quality and origin/health certificate for fish and shellfish.

i) The aggrieved fish exporter may make a request on form "I" annexure-XI) to the competent authority or authorized officer of Marine Fisheries Department, Ministry or Food, Agriculture & Livestock, Government of Pakistan for re-inspection and issue of certificate of quality and origin/health certificate for fish and shell fish on payment of such fee as indicates in Schedule-IV. ii) The competent authority shall constitute a committee of not less than 3 members to undertake inspection of fish consignment and if the committee is satisfied with the hygiene quality of the consignment, may issue the required certificate otherwise proceed as per sub-section

(ii) of Rule 19.

22. Utilization of fee charged on account of registration and issuance of certificate of quality and origin. - 50% fee realized on account of registration and certificate of quality and origin will be utilized for maintenance and up keep of the quality control laboratory of Marine Fisheries Department.

22 A. Responsibility of provincial, regional and local competent authority aquaculture establishments (hatchery, fish farm or feed mill).--{1) All provincial, regional and local competent authorities shall implement the National Residue Control Plan as notified by the Marine Fisheries Department with the objective of assessing the nature and extent of the compliance of aquaculture farms, hatcheries and feed mills with the plan.

(2) All provincial and regional competent authorities shall undertake monitoring of residues and food safety conditions in their respective jurisdiction for registered fish . farms, hatcheries and feed mills and through sampling and testing under NRCP will ascertaining whether the requirements of these rules are complied with.

(3) Provincial or regional competent authority shall draw up reports on the results of the monitoring program, it has carried out under these rules in accordance with rule 6 of Pakistan Fish Inspection and Quality Control Rules, 1998.

Mohammed Moazzam Khan

Director (Planning and Statistics)

Marine Fisheries Department

Government of Pakistan

Karachi

To the top

ANNEXURE-I

 

GENERAL CONDITIONS APPLICABLE TO FISH AND FISHERY PRODUCTS ON BOARD FISHING VESSELS

A- FISHING VESSEL CONSTRUCTION AND DESIGN

1. The fishing vessels should be designed for rapid and efficient handling of catch, ease of cleaning and disinfection and should be of such material and construction as to minimize any damage or contamination of the catch.

2. Deck ponds or pens, stanchions, dividing board and holding tanks should be constructed of suitable corrosion-resistant material. They should be adequate in number and height to prevent crushing of the catch due to excess weight or to vessel motion, and to hold the estimated catch.

3. Hold or tank linings should be completely water tight. The insulation layer should be protected by a lining of corrosion resistant metal sheet or any other suitable non-toxic material having water tight joints.

4. Wooden holds or wooden holding tanks should be lined with a suitable material.

5. Portable board of suitable corrosion-resistant material or impregnated and painted wood should be used for making shelves and vertical divisions in the holds where catch are stored.

6. Shelving boards should be designed to allow adequate drainage.

7. Where boxing at sea is carried out., the stanchions and dividing structures should be designed to accommodate boxes without leaving large air gaps.

8. Vessels engaged in night fishing should have sufficient deck illumination in the areas where the catch is landed, sorted, iced or handled.

9. Fishing vessels must be equipped with fish holds, tanks or containers for storage of fish or fishery products with ice. These holds shall be separated from the machinery and the quarters reserved for the crew by partitions which are sufficiently impervious to prevent any contamination of the stored fish or fishery products

10. If poisonous and harmful material including cleaning products, disinfectants, insecticides and all potentially toxic substances are stored on board, they should be kept in separate compartments and specially marked for this purpose and should be kept under lock. Their use must not pose any risk o£ contamination of fish or fishery products.

11. Vessels equipped for chilling of fishery produces in cooled sea-water either chilled by ice (CSM) or refrigerated by mechanical means (RSW) must comply with the following requirements.

a) Tanks must be equipped with adequate seawater filling and drainage installations and must incorporate devices for achieving uniform temperature throughout the tank.

b) Tanks must have means (or recording tank temperature, connected to a temperature sensor positioned in the section of tank where temperature is highest.

c) After each unloading, the tanks, circulatory system and containers must be completely emptied and thoroughly cleaned using potable water or clean seawater. They should only be filled with clean seawater.

d) The date and the tank number must be clearly indicated on the temperature recordings which must be available for inspection to the competent authority.

B- REQUIREMEHT OF HYGENIC CONDITIONS ON FISHING VESSEL

1. The Section of vessel or containers reserved for storage of fish and fishery products must not contain objects or products liable to transmit harmful properties or abnormal characteristics to the fishery products. The section or containers must be so designed that they are easy to clean and that ice water does not remain in contact with the fish or fishery products.

2. When used, the section of vessel or container reserved for the storage of products must be thoroughly cleaned and in particular, it must be ensured that it is not contaminated by the fuel used for propulsion of the vessel or by bilge water.

3. As soon as catch is taken on board, fish and fishery products must be protected from contamination and from the effects of sun or any other source of heat. They must be washed with clean seawater or fresh water complying requirements laid down in these rules.

4. Fish and fishery products must be handled and stored in such a way that bruising and damage to the flesh may not occur

5. After taking the catch on board, the temperature of fish and fishery products must be lowered as soon a possible.

6. Ice used for lowering the temperature of fish and fishery produces must be made from potable water or clean seawater.

7. After the fish and fishery products have been unloaded, the section of vessel/container, directly in contact with fish, must be cleaned with potable water or clean seawater.

8. When fish or fishery products are deheaded or gutted on board such operation must be carried out hygienically and the product muse be washed immediately and thoroughly with potable water or clean seawater. The viscera and discarded parts must be removed and set apart from fish and fishery products intended for human consumption. Livers and roes intended for human consumption mast be refrigerated or frozen immediately.

9. Equipment used for gutting, deheading and removing the fins which come in contact with fish and fishery products must be made of or coated with a material which is waterproof, resistant to decay, smooth and easy to clean and to disinfect. When used they must be completely cleaned.

10. Personnel and staff handling fish and fishery products must maintain a high standard of cleanliness for themselves and their clothes.

11. Containers used for storage of fish and fishery products must be hygienically neat and clean and when used these must be cleaned and washed thoroughly with potable water or clean seawater.

12. The working decks, the equipments fish holds and containers must be cleaned each time after usage with potable water or clean seawater. Disinfection, removal of insects or rat extermination shall be carried out whenever necessary.

13. Operators or owner of the fishing vessels must ensure to prevent engaging a sick fishermen or person liable to contaminate fish or fishery products on account of poor handling and hygiene until the said person or fisherman is found medically fit to perform duty without risk.

14. Adequate precautions, should be taken to ensure that human and other wastes from fishing vessels are disposed off in such a manner that it may not cause public health risk and hygiene hazard

15. At the end of each trip any unused ice should be discarded and removed from the vessel.

16. Cod ends and other parts of the fishing gear or traps should be made free of dead fish and organic material after each haul. All gears should thoroughly cleaned when fishing has ceased.

17. Duration of fishing vessel should be determined by the facilities available on the vessel for handling and keeping the catch well chilled or frozen. Distance from the processing facilities or markets and environmental conditions should also be taken into account.

18. Fishing vessels should not use outboard facilities during anchorage in the harbour.

ANNEXURE-II

CONDITIONS FOR FACTORY VESSELS

A- CONDITIONS CONCERNING DESIGN AND EQUIPMENT

i) The minimum requirement for fishing vessel:

a) a reception area set aside for taking fishery products on board, designed and arranged into ponds or pens that are large enough to allow each successive catch to be separated. This area and its movable parts must be easy to clean. It must be designed in such a way to protect the products from the sun or the equipments and from any source of dirt or contamination.

b) a system for conveying fishery products from the reception area to the work area. This area should be large enough for preparation and processing of fish and fishery products in proper conditions of hygiene. They must be designed and arranged in such a way so as to prevent any contamination of fish and fishery products.

c) storage areas for finished products which are large enough may be designed such that they are easy to clean. If fish waste processing plant operates on board, a separate hold must be designated for the storage of these products.

d) to have a place for storing packaging material which should be separate from the product preparation and processing area.

e) to have special equipment for pumping waste and fishery products that are unfit for human consumption either directly into the sea or where cumbersome, into a water tight tank reserved for the purpose. If waste is stored and processed on board, a separate areas must be allocated for the purpose.

f) to have equipment providing a supply of potable water intended for human consumption or pressurized clean seawater. The seawater intake must be situated in such a position where it is not likely to mix with the waste disposal.

g) factory vessels must be provided with sufficient number of changing rooms, washbasins and toilets, the latter not opening directly into areas where fish products are prepared, processed or stored. The washbasins must be equipped with appliances for washing and drying the hands of the staff to comply with the hygiene requirements. The washbasin taps must not be hand operated.

ii) Areas used for the preparation and processing or freezing/quick freezing of fish and fishery products must have:

a) a non-slip floor that is easy to clean and disinfect and equipped for easy drainage of water. Structures and fixtures must have lumber holds that are large enough not to be obstructed by fish waste to obstruct drain freely.

b) walls and ceiling that are easy to clean, particularly when there are pipes, chains or electric conduits.

c) hydraulic circuits must be arranged or protected in such a way to ensure that it is not possible for any leakage of oil to contaminate fish or fishery products.

d) adequate ventilation and where necessary vapour extraction.

e) adequate natural light or artificial lights should be provided. Where appropriate, the light should not alter colour and the intensity should not be less than: i) 500 lux (50 foot candles) at all inspection points ii) 220 lux (20 foot candles) in workroom iii) 110 lux (10 foot candles) in other areas.

f) appliances for cleaning and disinfecting tools, equipments and fitting.

g) appliances for cleaning and disinfecting the hands with taps that are not hand operated and with single use towels or papers towels.

iii) Equipments and tools such as cutting benches, containers, conveyers, gutting or filleting machines etc. must be resistant to seawater corrosion, easy to clean and disinfect and well maintained.

iv) Factory vessels which freeze fish and fishery products must have:

a) plant sufficiently powerful to lower down the temperature so as to achieve a core temperature that complies with the specification laid down under these rules.

b) refrigeration plant sufficiently powerful to keep fishery products in the storage hold at a temperature that complies with the specification as laid down under these rules. The storage hold must be equipped with temperature recording system placed such that it is easily be consulted.

 

To the top

 

B- CONDIITIONS OF HYGIENE RELATING TO ON-BOARD HANDLING AND STORAGE FISHERY PRODUCTS

i) A qualified person on board the factory vessel must be responsible for applying good fishery product manufacturing practices. That person shall have the authority to ensure that the provisions of the rules are applied and made available to fishery officers. For the programme of inspection and checking critical points, as applied on board, a register containing that person's comments and temperature recordings be maintained.

ii) The general conditions of hygiene applicable to areas and equipment shall be those as laid down in Appendix-IV.

iii) The general conditions of hygiene applicable to staff shall be those as laid down in Appendix-IV.

iv) Heading, gutting and filleting must be carried out under the conditions of hygiene as laid down in Appendix-IV.

v) On board processing of fishery products must be carried out under the conditions of hygiene as laid down in Appendix-IV.

vi) Fishery products must be wrapped and packaged under conditions of hygiene as laid down in Appendix-VIII.

vii) On board storage of fishery products must be carried out under conditions of hygiene as laid down under Appendix-IX

ANNEXURE-III

REQUIREMENTS DURING AND AFTER LANDINGS

 

1. Unloading and landing equipments must be constructed of material which is easy to clean and disinfect and must be kept in a good state of repair and cleanliness. Wicker baskets and any other container that have woven interstices must not be used for unloading and landing purposes.

2. During unloading and landings, contamination of fishery products must be avoided. It must be ensured that:

a) unloading and landing operations proceeds rapidly.

b) fishery products are placed without delay in a protective environment at the temperature required on the basis of the nature of the product.

d) equipment and handling practices that cause unnecessary damage to the edible parts of the fishery products are not authorized.

3. Parts of auction or wholesale markets where fishery products displayed for use must:

a) be covered and have walls which are easy to clean;

b) have water proof flooring which is easy to wash and disinfect and laid in such a way so as to facilitate the drainage of water and hygienic wastewater disposal system;

c) be equipped with sanitary facilities with an appropriate number of wash basins and flush lavatories, wash basins shall be supplied with material of cleaning hands and single use towels or paper towels;

d) be well lit to facilitate inspection of fishery products;

e) when they are used for display or storage of fishery products, should not be used for other purposes, vehicles emitting exhaust fumes which may impair the quality of fishery products must not be admitted to markets; undesirable animals (birds, cats, dogs, donkeys etc.) must not be allowed in markets and auction halls; there should be effective control on vermins and rodents in the markets and auction halls;

f) be cleaned regularly and at least after each sale; fish boxes and crates must, after each sale, be cleaned and rinsed inside and outside with potable water or clean seawater; where required, they must be disinfected;

g) display in a prominent position signs prohibiting smoking, spitting, eating and drinking;

h) be closeable and kept closed when the competent authority consider necessary;

i) have facilities to provide adequate water supplies;

j) have special watertight receptacles made of corrosion resistant materials for fishery products which are unfit for human consumption for later quick disposal.

k) in so far as they do not have their own premises on the spot or in immediate vicinity on the basis of the quantities displayed for sale, have, for the purposes of the Competent Authority, an adequate equipped lockable room and the equipment necessary for carrying out inspection.

l) have adequate number of balances for weighing fish and fishery products.

4. After landings or where appropriate, after first sale, fishery products must be transported without delay at temperature of melting ice.

5. The general conditions of hygiene as laid down in Appendix- III, shall apply mutatis mutandis to markets in which fishery products are displayed for sale or stored.

6. The wholesale markets in which fishery products are displayed for sale or stored shall be subject to the same conditions as those as laid down in Appendix-III

7. The general conditions of hygiene laid down in Appendix-IV, apply mutatis mutandis to wholesale markets.

8. The general conditions of hygiene laid down in Appendix-IV apply mutatis mutandis to ice plants providing ice to fish industry (fishing boats, landing centres and processing units).

ANNEXURE-IV

I. GENERAL CONDITIONS RELATING TO PREMISES, BUILDINGS AND EQUIPMENTS

1. Location

a) establishments should be located on approved industrial areas, which are free from objectionable odours, smoke, dust or other contaminants;

b) they should not be located in and area subjected to floodings.

2. Premises and building

a) the immediate roadways and areas serving the establishment within its immediate vicinity should be concreted or treated or tarred or turfed. There should be adequate drainage and provision to allow cleaning.

b) the processing establishment should be housed in a building of permanent nature affording sufficient protection from normal climatic hazards like wind blown, dust and rain and should be of sufficient size for work to be carried out under adequate hygienic conditions. Their design and layout shall be such that to preclude contamination of product. Clean and contaminated parts of the building shall be properly separated.

c) the food handling areas should be completely separated from the areas used for residential purposes.

d) the layout of different sections should be in such that to facilitate the smooth and orderly flow of work and to prevent possible cross contamination.

e) adequate natural light should be provided throughout the establishment. Where appropriate, the lighting should not alter colours and the intensity should not be less than

i) 540 lux (50 foot candles) at all inspection area.

ii) 220 lux (20 foot candles) in workrooms.

iii) 110 lux (10 foot candles) in other areas.

f) the bulbs and tube-lights should have protective covering.

g) there should be adequate facilities for natural or mechanical ventilation system to provide fresh air and where necessary good steam and water vapour extraction facilities should be provided. Ventilation opening should be provided with fly proofing arrangements and direction of flow should be from clean areas to dirty areas or outside the premises.

3. Fly proofing, vermin and animal control

a) the processing areas including the raw material receiving and storing area should be provided with effective fly proofing.

b) suitable steps should be taken to prevent the entry of insects, rodents and birds and animals into the establishment.

c) All establishments should have a bait map and maintain a roster of documented checks and actions.

4. Receiving area

a) there should be a raised platform to unload the raw material before taking it to the raw material receiving area.

b) the sides and tops of the receiving platform should be sufficiently protected from extraneous contamination.

c) the area in which the raw material is received and stored should be also separated from the area in which the finished product is prepared and packed so as to eliminate contamination.

5. Ceiling, wall and floor of workrooms

a) the floor of the seafood handling area should be waterproof, non absorbent, non slip, of non toxic material, without crevices and pits, easy to clean and disinfect and should be laid down in a way to facilitate the easy drainage of water or provided with equipment to remove water. There should be no water stagnantion on the floor,

b) the internal walls of the seafood handling area should be waterproof, non absorbent, durable and have smooth surfaces which are easy to clean and, should be without cervices and pits and of light colour.

c) walls should be free from projections and all pipes and cables should be neatly covered.

d) where appropriate wall to wall and wall to floor junctions should be rounded off to facilitate proper cleaning.

 

To the top

 

f) ceiling shall be free from cracks and open points and should be smooth, water proof, light coloured and easy to clean. It should be designed and constructed to prevent accumulation of dirt and minimize condensation, mold development and flaking,

g) all doors and windows should be durable and made of corrosion resistant material and should be of self closing type and easy to clean and should be kept in good condition with fly proofing arrangements.

h) all windows should be sloping inwards so as to prevent use as shelf and for easy cleaning purpose.

i) all entry points into processing areas should be provided with adequate facilities for cleaning and disinfecting hands,

j) all entry points into the processing area should be provided with feet washing pit of suitable size. The pit should be provided with potable water and disinfectant. The stagnant water should be changed at frequent intervals.

k) stairs, lift cages and auxiliary structures; such as platforms, ladders, chutes etc. should be so situated and constructed such that these may not to cause contamination to fish and fishery products. Chutes should be constructed with inspection and cleaning hatches.

l) instruments and working equipment such as tables, containers, conveyer belts, knives and other utensils used should be of smooth surface and made from corrosion resistant materials which are easy to clean and disinfect.

m) utensils used for inedible and contaminated materials shall be identified by specific mark and colours or shape and should not be used for handling edible products. Adequate waste receptacles should be provided for frequent removal of waste from working areas.

n) ice making machine should be provided in the establishments and ice should be made from potable water or clean seawater and should be stored and handled so as to protect it from contamination.

5. Machinery

a) freezing equipments sufficiently powerful should be provided to achieve a rapid reduction in the temperature so that the required core temperature is obtained within the minimum period.

b) freezing equipment should be fitted with gauges to indicate temperature and pressure.

6. Cold rooms/storages

a) chill rooms and ice store should be provided wherever necessary.

b) the cold rooms where the finished products are stored should have sufficiently powerful refrigeration plant to keep products at prescribed temperature.

c) the floor of the cold rooms should be waterproof, easy to clean and disinfect and laid down in a manner to facilitate the drainage of water or should be provided with equipment to remove water.

d) walls should have smooth surface and should be durable, impermeable and easy to clean.

e) ceiling or roof lining should be easy to clean.

f) doors should be of durable material and easy to clean.

g) there should be adequate lighting.

h) the ideal temperature of cold storage should be minus 18 Celsius or below. i) the cold storage should be fitted with automatic temperature recording device.

j) the cold storage should have suitable arrangements on floor and walls to facilitate free circulation of air. k) an ante-room of suitable size should be provided.

l) there should be an efficient alarm system.

m) strip air curtains should be provided at the entrance of the ante-room and cold storage.

n) the cold storage should be maintained in good conditions.

7. Potable water

a) facilities for adequate supplies of potable water or alternatively clean seawater or seawater treated by an appropriate system, under pressure and in sufficient quantity should be provided.

b) non drinking water is permissible for production of steam, fire fighting and cooling of refrigeration equipment, provided that the pipes installed for the purpose preclude the use of such water for other purposes and present no risk of contamination of the fishery products. Non drinking water should be clearly distinguished from those used for drinking water or clean seawater.

8. Sewage and waste disposal

a) establishment should have an efficient effluent and waste disposal system which should at all time be maintained in good order and condition.

b) all effluent lines (including sewer system) should be large enough to carry peak loads and should be so constructed such that to avoid contamination of potable water supplies.

9. Changing rooms and toilets

a) an adequate, suitable and conveniently located change rooms and toilets should be provided in all establishments with smooth, waterproof, washable walls and floors, wash basins, flush lavatories and lockable cupboards.

 

To the top

 

b) the lavatories should be well lit and ventilated and should not open directly on the work rooms. The washbasins should have materials for cleaning the hands and disposable towels, the washbasins taps should not be hand operated.

10. Inspection facilities

a) if the volume of products treated requires regular or permanent presence, an adequately equipped lockable rooms for exclusive use of the inspection service should be provided.

b) all facilities must be made available for inspection of operation system and products.

11. Disinfection of equipment

a) adequate facilities for cleaning and disinfection of working implements and equipment should be provided.

b) these facilities should be made of corrosion resistant materials, capable of being easily cleaned and should be fitted with suitable means of supplying hot and cold water in sufficient quantities and pressure.

12. Establishments keeping live animals such as crustaceans and fish should have appropriate fittings ensuring the best survival conditions provided with water of a quality such that no harmful organisms or substance are transferred to animals.

II.  GENERAL CONDITIONS OF HYGIENE

1. General conditions of hygiene applicable to premises and equipment

a) the building, equipment, utensils and all other physical facilities of the establishment including drains should be maintained in good and orderly condition. As far as practicable, rooms should be kept free from steam, vapour and surplus water.

b) floor, walls and partitions, ceilings and roof linings, equipment and instruments used for working on fishery products should be kept in a satisfactory state of cleanliness and repair so that they do not constitute a source of contamination for the products.

c) establishments and surrounding areas should have an effective and continuous programme for the control of pests and should be regularly examined for any evidence of infestations.

d) detergents, disinfectants and similar substance should be approved by the competent authority and used in such a way that they do not have adverse effects on the machinery, equipment and products.

e) pesticides should only be use if other precautionary measures cannot be used effectively. Before pesticides are applied, care should be taken to safeguard all food, equipment and utensils from contaminations. After application, contaminated equipment and utensils should be thoroughly cleaned to remove residues prior to being used again.

f) pesticides, detergents and any other potentially hazardous products should be suitably labeled with warnings. They should be stored in separate and locked room, used only for this purpose. Chemicals and disinfectants may be handled only by authorized personnel.

g) the establishment should have a permanent cleaning and disinfection schedule to ensure that all areas, equipment and utensils are appropriately cleaned. Swab tests of utensils, floor, surface of tables and workers hands/gloves to verify cleanliness, may be done on routine basis.

h) personal belongings and clothing should not be kept in food handling areas.

i) working areas, instruments and working equipment should be used only for work on fishery produce. However, on authorization by the competent authority, they may be used for work on other foodstuffs also.

j) potable water or clean seawater should be used for all purposes. However, non-potable water can be used for steam generation, fire fighting and the cooling of refrigeration equipment, provided that the pipes installed for the purpose preclude the use of such water for all purposes and present no risk of contamination of the products.

2. General conditions of hygiene applicable to staff.

a) the highest possible standards of cleanliness are required from staff especially:

i) staff should wear suitable clean working cloths and headgear which completely encloses the hair. This applies particularly to persons handling exposed fishery products;

ii) staff assigned to handling and preparation of fishery products should be required to wash their hands at least each time work is resumed. Wounds on the hands should be covered by a waterproof dressing.

iii) smoking, spitting, eating and drinking at work and storage premises of fishery products should be prohibited.

b) requisite measures should be taken to prevent persons liable to contaminate fishery products from working on and handling them, until there is an evidence that such persons can do so without risk.

c) at the time of recruitment, all staff working on handling fishery products should be required to undertake thorough medical tests and a certificate be issued that there is no impediment of his/her handling seafood. The certificate may be revalidated after another medical check after every six month. This certificate should be verified by the Competent Authority at the time of recruitment of staff and after every revalidation.

ANNEXURE -V

SPECIAL CONDITIONS FOR HANDLING FISHERY PRODUCTS ON SHORE

 

1. Conditions for fresh products.

a) where chilled, unpacked products are not dispatched, prepared or processed immediately after reaching the establishment, they should be stored under ice in the establishment cold room, re-icing should be carried out as often as is necessary; the ice used, with or without salt should be made from potable water or clean seawater or be stored under hygienic conditions in receptacle provided for the purpose; such receptacles should be kept clean and in a good condition. Pre-packed fresh products should be chilled with ice or mechanical refrigeration plants creating similar temperature conditions.

b) if they are not carried out on board, operations such as beheading and gutting should be carried out hygienically. The product should be washed thoroughly with potable water or clean seawater immediately after such conditions.

c) operations such as filleting and slicing should be carried out in such a way as to avoid the contamination or spoilage of fillets, steaks and slices, and in a place other than that is used for beheading and gutting operations. Fillets, steaks and slices should not remain on work tables any longer than is necessary for their preparation and should be protected from contamination by appropriate packaging. Fillets, steaks and slices to be sold fresh should be chilled as quickly as possible after preparation.

d) guts and other offals that may constitute a danger to public health should be separated from and removed from the vicinity of products intended for human consumption.

e) containers used for dispatch or storage of fresh fishery products should be designed in such a way as to ensure both their protection from contamination and their preservation under hygienic conditions and more particularly they should provide adequate drainage of melting water.

f) unless special facilities are provided for the continuous disposal of wastes, the latter should be placed in leakproof, covered containers which are easy to clean and disinfect. Wastes should not be allowed to accumulate in working areas. It may be removed either continuously or as soon as the containers are full. At the end of each working day the waste containers shall be shifted to premises/areas intended for storage of such containers. The containers, receptacles and/or area set aside for waste should always be thoroughly cleaned and disinfected after use. Waste stores should not constitute a source of contamination for the establishment or of pollution of its surroundings.

2. Conditions for frozen products

a) plants should have:

i) freezing equipment sufficiently powerful to achieve a rapid reduction in the temperature so that the temperature laid down in these rules can be obtained.

ii) freezing equipment sufficiently powerful to keep products in storage rooms at a temperature not exceeding those laid down in these rules whatever the ambient temperature may be.

b) Fresh products to be frozen or quick frozen should comply with the requirements of Section (1) of Annexure-V.

c) Storage rooms should have a temperature recording device in a place where it can easily be read. The temperature sensor of the recorder should be located in the area farthest from the cold source i.e. where the temperature in the storage room is the highest. Temperature charts should be made available for inspection to the Competent Authority, whenever, demanded.

3. Conditions for thawing.

a) fishery products, if required, thawed under hygienic conditions; their contamination should be avoided and there should be adequate drainage for water.

b) during thawing the temperature of the product should not increase excessively.

c) after thawing, fishery products should be handled in accordance with the requirements of these rules. When they are prepared or processed, these operations should be carried out without delay.

4. Conditions for processed products

a) fresh, frozen and thawed products used for processing should comply with the requirements of Section (l) of Annexure-V.

b) where the processing treatment is carried out to inhibit the development of pathogenic bacteria/micro- organisms, or if it is significant factor in the preservation of the product, the treatment should be scientifically recognized and approved by the Competent Authority.

c) processing supervisor should keep a register of the processing carried out. Depending on the type of processing employed, heating time and temperature, salt content, pH and water content should be monitored and controlled. Records should be kept at least for the expected storage life of the products and should be made available to the Competent Authority, on demand.

 

To the top

 

d) for products which are preserved for a limited period by a treatment such as salting, smoking, drying or marinating, the appropriate conditions for storage should be clearly marked on the packaging,

e) in case of fishery products which have been subjected to sterilization in hermetically sealed containers (i.e. canning):

i) only potable water should be used for the preparation of canned products.

ii) the process used for the heat treatment should be appropriate having consideration for criteria such as the heating time, temperature, filling, size of containers etc., a record of which should be kept; the heat treatment should be capable of destroying or inactivating pathogenic organisms and the spores of pathogenic micro-organisms. The heating equipment should be fitted with devices for verifying that the containers have in fact undergone appropriate heat treatment.

iii) potable water should be used to cool containers after heat treatment to prevent corrosion of the equipment and containers.

iv) further checks should be carried out at random by the establishment to ensure that the processed product have undergone heat treatment viz. incubation test (incubation should be done at 37 C for seven days or at 35 C for 10 days) and microbiological examination of the contents and containers in the establishment's laboratory or in any other approved laboratory.

v) samples should be taken of production each day at predetermined intervals, to ensure the efficiency of sealing.

vi) checks are carried out in order to ensure that the containers are not damaged.

vii) all containers which have undergone heat treatment under practically identical conditions should be given a batch identification mark.

f) In case the fishery product is processed by smoking:

i) smoking should be carried out in separate premises or a special place which is equipped, if necessary, with a ventilation system to prevent smoke and heat from the combustion from affecting other premises or places where fishery products are prepared, processed or stored.

ii) material used to produce smoke should be stored away from the place of smoking and should be used in such a way that they do not contaminate the product.

iii) material used to produce smoke by burning wood that has been painted, varnished, glued or has undergone any chemical preservation treatment should not be used.

iv) after smoking, products should be cooled rapidly to the temperature required for their preservation before being packaged.

g) In case the fishery product is processed by salting:

i) salting operations should take place in different premises and sufficiently removed from the premises where others operation are carried out.

ii) salt used in the treatment of fishery products should be clean and stored in such a way so as to preclude contamination.

iii) salt once used should not be reused.

iv) any container used for salting or brining should be constructed in such a way as to preclude contamination during salting or brining process.

v) containers or areas used for salting should be cleaned before use.

h) In case of cooked crustaceans and molluscs cooking should be done as follows:

i) cooking should be followed by rapid cooling; only potable water or clean seawater should be used for the purpose.

ii) if no other method of preservation is used, cooling should continue until the temperature approach that of melting ice.

iii) shelling or shucking should be carried out under hygienic conditions avoiding the contamination of the product. When such operation are done by hand, worker should pay particular attention to the washing of their hands and all working surfaces should be cleaned thoroughly. If machines are used, they should be cleaned at frequent intervals and disinfected at the end of each working day.

iv) after shelling or shucking, cooked products should immediately be frozen or kept chilled at a temperature which will preclude the growth of pathogens and should be stored in appropriate premises.

v) every manufacturer should carry out microbiological checks of the production at regular intervals, complying with the standards.

i) In case the mechanically recovered fish flesh:

i) mechanical recovery of gutted fish should take place without undue delay after filleting using raw materials which is free of gut. Where whole fish is used, they should be gutted and washed before hand;

ii) the machinery should be cleaned at frequent intervals and at least after two hours;

iii) after recovery, mechanically recovered fish should be frozen as quickly as possible or incorporated in a product intended for freezing or treatment.

5. Conditions concerning parasites

a) during production and before sale, fish and fishery products should be subjected to a visual inspection for the purpose of detecting and removing any parasites that are visible.

b) fish or parts of fish which are obviously infested with parasites, and which are removed, should not be placed in markets for human consumption.

c) fish and fishery products which are consumed raw or undergo a cold smoking process (at which the internal temperature of fish is less than 60 C such as mackerel, sprats) or marinated and /or salted herring (where the process is insufficient to destroy the larvae of nematodes) should, in addition, be subjected to freezing at a temperature of not more than -20 Celsius in all parts of the product for not less than 24 hours. Products subjected to this freezing should be either raw or finished.

ANNEXURE-VII

HEALTH CONTROL AND MONITORING OF PRODUCTION CONDITION

1. General Monitoring The competent authority shall make adequate arrangements for checking and monitoring in order to establish that the requirements laid down in these rules are complied with. Such arrangements shall include in particular:

a) a suitable check on the fishing vessels, with the understanding that such checks may be carried out during the stay of the vessel in port;

b) a suitable check on the conditions of landing and first sale;

c) suitable checks on harvesting, transport, relaying and purification areas of bivalve molluscs of pre- processing and processing centres.

d) an inspection, at regular intervals, of establishments to check in particular:

i) whether pre-processed material has been procured from pre-processing premises having adequate hygiene conditions, and valid registration with registration authority.

ii) whether the conditions for approval are still fulfilled;

iii) whether the fresh, frozen and processed fish and fishery products are handled correctly;

iv) whether the cleanliness of the premises, facilities and instruments and self hygiene are maintained.

v) whether identification marks are put on correctly.

e) A check on storage and transport conditions.

2. Special Checks

 

To the top

 

a) Organoleptic checks The competent authority shall carry out inspection at the time of landing or before first sale and also during subsequent stages of processing, storage and transport to check whether the products are fit for human consumption. The inspection shall comprises an organoleptic checks carried out by sampling:

i) If the organoleptic examination reveals that the fishery products are not fit for human consumption, measures shall be taken to withdraw them from sale and to dispose them off in such a way that the rejected material is not used for export.

ii) If the organoleptic examination reveals any doubt as to the fitness of the fishery products, use may be made of chemical checks (TVB-N and/or TMA etc.) or microbiological analysis.

b) Parasite Checks Before fish and fishery products are released for human consumption, these should be subjected to a visual inspection by way of sampling, for the purpose of detecting any parasites that are visible. Fish or parts of fish which are obviously infested with parasites and which are removed shall be disposed off in such a manner that such material is not used for export.

c) Histamine Check Whenever necessary samples shall be drawn and tested for histamine content. Nine samples should be taken from each batch. This should fulfill the following requirements:

i) The mean value should not exceed 100 ppm;

ii) Two samples may have a value of more than 100 ppm, but less than 200 ppm;

iii) No sample may have a value exceeding 200 ppm. These limits apply only to fish species of families Scombridae, Coryphaenidae and Clupeidae. However, fish belonging to these families which have undergone enzyme ripening treatment in brine may have higher histamine levels (<400 ppm). Examination should be carried out in accordance with reliable, scientifically recognized method such as high performance liquid chromatography (HPLC).

d) Contamination Present in Aquatic Environment Without prejudice to the rules concerning environmental protection and management and in particular those concerning pollution of aquatic environment, the fishery products should not contain in their edible parts contaminants present in the aquatic environment such as heavy metals and organochlorineate substances at such a level that the calculated dietary intake exceeds the acceptable daily or weekly intakes for humans. Level of methyl mercury, however, should not exceeds a level of 0.5 ppm in edible part of the fish. Unless otherwise required by the importing country, methyl mercury may be randomly checked in fishes such as bonitos, halibuts, spanish mackerels, kingfish, marlins, sailfishes, sharks and other species. A monitoring system should be established by the competent authority to check the level of contamination of fishery products.

e) Microbiological Analysis Whenever necessary samples shall be drawn and tested for microbiological factors. Sample plans, methods of analysis and acceptance criterias for this purpose should be in accordance with the requirement of the importing countries or as decided by Director General, Marine Fisheries Department.

ANNEXURE -VIII

PACKAGING AND IDENTIFICATION MARKS

 

A. PACKAGING

1. Packaging should be carried out under satisfactory conditions of hygiene to preclude contamination of the fishery product.

2. Packaging material and products liable to enter into contact with fishery products should comply with all rules of hygiene and in particular:

a) these should not be such as to impair the organoleptic characteristics of the fishery products.

b) these should not be capable of transmitting to the products substance harmful to human health.

c) these should be strong enough to protect the fishery products adequately.

3. Boxes/ containers used for carrying of raw materials to the processing establishments should not be used to store the accepted raw material and also in subsequent processing, such boxes/containers shall be identifiable by suitable colour or mark.

 

To the top

 

4. With the exception of certain boxes/containers made of impervious, smooth and corrosion resistant material which are easy to clean and disinfect, which may be reused for fresh products held under ice should provide adequate drainage.

5. Unused packaging material should not be stored in premises away from the production area and be protected from dust and contamination.

B. Identification Marks

The packages of fresh, frozen and processed fish and fishery products and accompanying documents should bear the numerical processing code (approval number) allotted by the Competent Authority followed by an abbreviation or full description of the name and type of the product, year, month and date of production. The package should also indicate in bold words " Product of Pakistan"

ANNEXURE-IX

STORAGE AND TRANSPORT

 

1. Fresh, frozen and processed fish and fishery products should, during storage be kept at the temperature laid down under these rules and in particular:

a) fresh or thawed fishery products and cooked and chilled crustacean and molluscan shellfish products should be kept at the temperature of melting ice.

b) frozen fishery products with the exception of frozen fish in brine intended for the manufacture of canned food, should be kept at an even temperature of -18 C or less in all parts of the product, allowing for the possibility of upward fluctuations of less than 3 C during transport. c) processed product should be kept at the temperature specified by the manufacturer when the circumstances so required.

2. When frozen fishery products are transported from a cold storage/plant to an approved establishment to be thawed on arrival for the purpose of preparation and/or processing and where the distance to be covered is short, not exceeding 50 km or 1 hour journey, the Competent Authority may grant a derogation from the conditions laid down in these rules.

3. Products may not be stored or transported with other products which may contaminate them or affect their hygiene, unless they are packaged in such a way as to provide satisfactory protection.

4. Vehicles used for the transport of fishery products should be constructed and equipped in such a way that the temperature as laid down in these rule can be maintained throughout the period of transport. If ice is used to chill the products, adequate drainage should be provided in order to ensure that water from melted ice does not stay in contact with the products. The inside surfaces of the means of transport should be finished in such a way that they do not adversely affect the fresh, frozen and processed fish and fishery products. They should be smooth and easy to clean and disinfect.

5. Means of transport used for fresh, frozen and processed fish and fishery products may not be used for transporting other products likely to impair or contaminate fishery product except when fishery products can be guaranteed uncontaminated as a result of such transport being thoroughly cleaned and disinfected.

6. Fresh, frozen and processed fish and fishery products may not be transported in a vehicle or container which is not clean or which should have been disinfected.

7. The transport conditions of fresh, frozen and processed fish and fishery products to be exported shall be such that they do not adversely affect the product.

ANNEXURE-X

CONDITIONS FOR REGISTRATION AND ISSUANCE OF CERTIFICATE OF 
QUALITY AND ORIGIN

 

I. REGISTERATION CERTIFICATE FOR FISH PROCESSING PLANT AND FISH EXPORTER

1. The fee for a registration certificate for fish processing plant, freezing/canning plant as well as fish exporter is given in the Schedule-III appended herewith.

2. The registration certificate is not transferable and is valid only for the firm/fish exporter for which it has been issued.

3. The registration certificate should be placed in the processing plant, where fish trade is carried out and should be produced on demand by the Registration Authority or Fishery Officer.

4. The registration certificate is valid for one calendar year for which it is issued irrespective of the date of issue, if the Registration Authority is satisfied that failure to apply for renewal within the specified time not without reasonable cause, it may renew the same on receipt of the renewal fee as given in Schedule-III.

II. CONDITIONS FOR CERTIFICATE OF QUALITY AND ORIGIN/HEALTH CERTIFICATE

1. The fee for certificate of quality and origin/health certificate will be Rs 1,000. Any specific certificate required by importing country or by the buyer or required for any other purpose will be issued on deposition of an additional Rs 1,000. Certificate of Quality and Origin have to obtained for all shipments.

2. The certificate of quality and origin/health certificate is not transferable and is valid only for the establishment/fish exporter and the consignment for which it has been issued.

3. The certificate of quality and origin/health certificate will be valid for 5 days from affecting shipment.

4. The certificate of quality and origin/health certificate should be issued subject the fulfillment of the requirements of these rules.

FORM "A"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

APPLICATION FORM FOR REGISTRATION OF FISH PROCESSING PLANT.

FIRM OR FISH EXPORTER

[ See rule 9(i) ]

1.

Name of the processing plant, firm or name of the fish exporter:

2.

Name of the owner of the plant, firm or fish exporter:

3.

Status of the firm whether limited partnership or sole proprietary concern:

4.

In support of answer (3) above, furnish a copy of Memorandum & Articie of Association, Partnership deed, or an affidavit, as the case may be:

5.

Full address of the processing plant,firm or fish exporter with telephone No. & Fax No.

a) Office: Tel:

Fax:

b) Plant: Tel:

Fax:

6.

Type of fish processing plant:

(Freezing, canning, or any other plant)

7.

Furnish a copy of fish processing agreement from the registered fish processing plant in case the fish exporter is not the owner of the processing plant:

8.

Area of the processing plant:

a) Total area -Sq Yards:

b) Total constructed area -Sq Yard:

9.

Date of operation of the fish processing plant: (or date when firm, exporter started fish export trade):

10.

Installed capacity of the fish processing plant:

a) Freezing capacity tons per 24 hours

b) Canning capacity tons per 24 hours

c) Storage capacity

11.

Storage capacity of the fish processing plant:

No. of rooms

Capacity

Temperature

a) Chill rooms:

b) Storage rooms for frozen fish/shell fish

c) Stores for canned fish/shell fish;

12.

Particulars of the machinery of the fish processing

plant: (Indicate details of the main machinery) :

13.

Attach sketch plant of the fish processing plant:

14.

Capital Investment:

a) Plant construction: Rs.

b) Plant machinery: Rs.

15.

Fee paid for registration of the fish processing plant:

 

To the top

 

UNDERTAKING

I. I/We hereby solemnly affirm that the information given above is correct to the best of my knowledge and belief.

II. I/We undertake:-

a) to abide by the provisions of the Pakistan Fish I Inspection and Quality Control Act, 1997 and the rules made thereunder;

b) to abide by all the instructions of the concerned registration authority or Fishery Officer to process fish ad fishery products according to the provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997;

c) not to carry any undesirable trade practice affecting fish export; and

d) to take full responsibility to maintain hygienic conditions within and outside fish processing plant and process fish and fishery products under good commercial manufacturing practices.

Signature of the Owner/Managing Director

of the fish processing plant, firm or fish exporter

Place: __________________

Date: ___________________

Fee for registration of the fish processing plant or fish exporter is Rs.__________________

 

FORM "A-1"

Marine Fisheries Department
Ministry of Maritime Affairs

Application for Registration of Aquaculture Farm
Fish Inspection and Quality Control Rules, 1998

(see rule 8)

Indicate                      Private                      Joint Venture                      Trust
owership                    company

                                  Private                      Sole Owner                         Other
                                  company

Indicate                      Individual farm                                            If Group Member,
association                                                                                      Name of Group

Site                               One site                                                     Multisite                    
Characteristic          (Adjacent ponds)                                 (Non-Adjacent ponds)                

1. Name of the applicants (s)/ registered company/ establishment
2. Address             
3. Whether the application is for ( a) Registration of aquaculture farm already operating Yes/No                                  
Registration of new aquaculture farm to be constructed Yes/No     
4. Details of land for which registration is applied for
a) Province
b) Djstrict
c) Tehsil/Taluk
d) Revenue village
e) Survey or Khasra No.
f) Ownership right (Whether freehold or lease hold)
g) Total Farm Area (in Acres)
h) Water Spread Area (in Acres)
i) Provide detail of adjacent Pond/Pond Codes
j) Provide detail of non-adjacent Pond/ Pond Codes
5. If the whole or a part of the above land falls under any one of the following categories, please furnish details:
Category
a) Agricultural
b) Forest land
c) Land meant for public purpose
d) Wetlands
e) Mangroves
f) Salt plan
6. Water for the Aquaculture Unit
a) Sea Yes/No
b) Creek/estuary/ Back water/River/Canal water
(saline or freshwater
Yes/No
c) Underground water Yes/No
7. Species cultured for breeding, harvesting and export Indicate or Attach list of species
8. Date of commencement of operatjons of existing aquaculture establishments (hatchery, fish farm or feed mill)
For Feed Mills
a) Nature of Business
b) Aniqial Nutritiorust/Veterinary Consultant
c) Quality Control Chemist
d) Brand Name:
e) Classification: (Mixed Feed/Feed lngredient/Additives/Supplement)
f) Product Lines: (for registration)
g) Name of fish/shrimp species Feed code with specification
9. *If effluents treatment system (ETS) has been in operation/Proposed,please furnish layout design and technical details
10. Map of aquaculture establishments (hatchery, fish farm or feed mill) Yes
11. Detail of remittance of processing fee

Declaration

I/ We...................................... son(s) /daughter(s)/wife of......................................................... residing at......................................................... hereby declare that the information furnished above is true to the best of my/ our knowledge and belief. I am/we are fully aware that if it is found that the information furnished by me/us is false or there is any kind of deviation/violation of the conditions on which certificate of registration may be issued by the Authority, the Certificate of Registration issued may be either suspended or cancelled.

Signature of applicant (s)
Date:
Place:

*Applicable for aquaculture establishments (hatchery, fish farm or feed mill) with water spread area of ihore than 5(five) acres".

 

 

FORM "B"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

 REGISTRATION CERTIFICATE FISH PROCESSING PLANT

FIRM OR FISH EXPORTER

[ See rule 9(ii) ]

1.

Name of the processing plant, firm-

or name of the fish exporter:

2.

Owner's Name:

3.

Full address:

a) Office:

b) Plant:

4.

Type of fish processing plant:

5.

Date of operation of the fish processing plant:

6

Registration certificate granted by Marine

Fisheries Department:

MFD/R.C.No.

dated

7.

Validity of registration certificate:

8.

Fee paid for registration: Rs.

Registration certificate is hereby granted to the aforesaid firm/fish exporter for processing and export of fish and fishery products subject to the provisions of the Pakistan Fish Inspection and Quality Control Act,1997 and the rules made thereunder.

Registration Authority

Marine Fisheries Department

Government of Pakistan

Ministry of Food, Agriculture & Livestock

Place: __________________

Date: ___________________

 

FORM "B-1"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

REFUSAL OF REGISTRAT!ON CERTIFICATE FOR FISH PROCESSING PLANT

FIRM OR FISH EXPORTER

See rule 9(ii)

To the top

 

We have have examined your fish processing plant/ firm/ establishment situated at _____________ Karachi, on ________ and it has been found that you do not fulfilled with the following provision and rule of the Pakistan Fish Inspection and Quality Control Act, 1997: Condition ________________________________________________________________

                                                                                                                   ________________________________________________________________

In view of above your request made vide application dated _______ for registration of the above fish processing plant cannot be acceded to under rules 9(ii). You may, however, apply for registration in Form "A" after the conditions and provisions/rules of the above Act are completely fulfilled.

Registration Authority

Marine Fisheries Department

Government of Pakistan

Ministry of Food, Agriculture & Livestock

Place: __________________

Date: ___________________

 

 

FORM B-2

Fisheries Department
(Punjab, Sindh, Balochistan, KP, AJK, GB)

Registration Certificate for Fish/Shrimp Farm
Fish Inspection and Quality Control Rules, 1998

(See rule 9 A)

1.

Name of the applicants (s)/ registered company/ establishment

2.

Owner name

3.

Full Address

4.

Office

5.

Farm

6.

Type of Farm

7.

Date of farm operation

8.

Registration certificate granted by Marine Fisheries Department

MFD/R.C.No.
Dated

9.

Validity of registration certificate:

10.

Fee paid for registration: Rs.

Registration certificate is hereby granted to the aforesaid firm/fish farmer for farming of fish/shrimp subject to the provisions of the Pakistan Fish Inspection and Quality Control Act,1997 and the rules made thereunder.

Registration Authority
Fisheries Department
(Punjab, Sindh, Balochistan, KP, AJK, GB)

Place:______________

Date:_______________

 

 

FORM "C"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

CANCELLATION/SUSPENSION OF REGISTRATION CERTIFICATE

[ See rule 11(i) ]

Whereas you M/s ______________________________ have contravened and failed to comply with the provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997 the Registration Certificate granted to you vide No. MFD/R.C. No. _________, dated ________ M/s ___________________________________ (Name of the fish processing plant, firm, fish exporter & address) is hereby canceled/suspended with immediate effect.

You may, however, apply for registration renewal on Form "A" after the conditions and provisions /rules of the above Act are completely fulfilled.

Registration Authority

Marine Fisheries Department

Government of Pakistan

Ministry of Food, Agriculture & Livestock

Place: __________________

Date: ___________________

 

FORM "C-1"

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

CANCELLATION/SUSPENSION OF REGISTRATION CERTIFICATE

Fish Inspection and Quality Control Rules, 1998

[ See rule 11 A ]

Whereas you M/s ______________________ have contravened and failed to comply with the provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997 the Registration Certificate granted to you vide No.______________________ FD/R.C. No.______________________,dated______________________M/s______________________ (Name of the fish farm, hatchery or feed mill & address) is hereby cancelled/suspended with immediate effect.

You may, however, apply for registration renewal on Form "A" after the conditions and provisions truies''of the above Act are completely fulfilled.

Registration Authority
Fisheries Department
(Punjab, Sindh, Balochistan, KP, AJK, GB)

Place: __________________

Date: ___________________

 

FORM "D"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

APPLICATION FOR RENEWAL OF REGISTRATION CERTIFICATE FOR

FISH PROCESSING PLANT, FIRM OR FISH EXPORTER

[ See rule 12 }

To the top

 

Whereas Registration Certificate MFD/R.C.No. _____________________ dated _______ granted to M/s ________________________________ for processing and export of fish and fishery products, has expired/is being expired on _________, it is, therefore, requested that the aforementioned Registration Certificate be renewed as per provision and rules of the Pakistan Fish Inspection and Quality control Act, 1997.

Application form "A" duly filled in for registration of fish processing plant/firm/fish exporter, is enclosed together with its renewal fee for further processing at your end.

Signature of the Director/ Partner/Director of the
fish processing plant/firm or fish exporter

Place: __________________

Date: ___________________

 

Fee for renewal of registration of
the fish processing plant or fish

exporter is Rs. _____________

 

FORM "D-1"

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

Application for Renewal of Registration of (i) after Form "A", the following new Form "A1" shall be inserted, namely :-

Fish Inspection and Quality Control Rules, 1998
(See rule 12- A)

Whereas Registration Certificate MFD/R.C.No. __ .................... dated ___ ................... . granted to M/s ____________ for Fish/Shrimp Farm, has expired/is being expired on ___ .......... , it is, therefore, requested that the aforementioned Registration Certificate be renewed as per provision and rules of the Pakistan Fish Inspection and Quality control Act, 1997.

Application fonn "A" duly filled in for registration of fish processing plant/finn/fish exporter, is enclosed together with its renewal fee for further processing at your end.

Signature of the Director/
Partner/Director of the
fish processing plant/firm or
fish exporter

Place: __________________

Date: ___________________

 

 

FORM "E"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

SUPPLY OF DATA REGARDING PROCESSING AND EXPORT

OF FISH AND FISHERY PRODUCTS

[ See rule 16(i) ]

1. Name of the processing plant, firmor name of the fish exporter: ______________________

2. Full address:

a) Office: ____________________________________ Tel: ______________________

b) Plant: ____________________________________ Tel: ______________________

3. Type of fish processing plant: ____________________________________________ (Freezing, canning, or any other plant)

4. Registration Certificate MFD/R.C.No ______________________ Date ______________

5.Quantityof fish .processed and exported .during the month of _______ 199 __ :

Fish processed in

tons

Exported in tons

Value in

Pak Rs.

Balance in tons

a) Frozen fish

b) Frozen shrimp

c) Frozen shell fish

d) Any other product

TOTAL:-

 

I/We hereby solemnly affirm that information given above is correct to the best of my knowledge and belief.

Signature of the Owner/Managing Director

of the fish processing plant/firm/fish exporter

Place: __________________

Date: ___________________

FORM "F"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

APPLICATION FOR ISSUE OF CERTIFICATE OF QUALITY AND

ORIGIN/HEALTH CERTIFICATE FOR EXPORT OF FISH AND FISHERY PRODUCTS

[ See rule 18(i) ]

To the top

 

I/We intend to make following shipment to ________________ (City/Port) ______(Country)

as per details given below:

1. Name of fish and fishery product: ____________________________________________ (Frozen/canned fish or shell fish or any other product)

2. No. of Master Cartons & details: ____________________________________________

3. Total weight in Kg : ____________________________________________

4. Quality/Brand Name: ____________________________________________

5. Name of the buyer/importer: ____________________________________________

6. Name of the vessel: ____________________________________________

7. Destination: ____________________________________________

8. Shipping Marks: ____________________________________________

9. Date of shipment: ____________________________________________

10. Registration Certificate MFD/R.C.No. ____________________ Dated ______________ The above consignment is stored in our fish processing plant ______________________ at and maintained at temperature -18 C/ ______ C.

You are requested to depute one of your Fishery Officer to inspect the above consignment and arrange for issue of Certificate of Quality and Origin as per provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997.

Copies of invoice, undertaking, relative shipping documents together with the required inspection fee are enclosed for further processing at your end.

Signature of the Owner/Partner/ Director

of the fish processing plant/firm/fish exporter

Place: ________________

 

 

FORM F-1
Local Competent Authority for Marine Fisheries Department
(Punjab, Sindh, Balochistan, KP, AJK, GB)

APPLICATION FOR ISSUE OF TRACEABILITY CERTIFICATE

Fish Inspection and Quality Control Rules, 1998
(See rule 18 A)

LCA Name: ....................................................................

Farm Registration Number: ...............................................

Proposed harvesting date: ......................................................

I/We intend to make fish pond harvesting of ( .................. ) number of ponds at our registered fish/shrimp farm located at ......................................................................... as per details given below:

1. Farm Information

1.1. Aqua farmer Group (if any) ........................

1.2. Name of Farmers .................................

1.3. Address .............................................

1.4. Pond Code (as per registration certificate) ............................................

1.5. Last Date using medicine ......................................

1.6. Date of residue sampling for the last 2 years, if any

1.7. Average weight of harvest-piece/kg

1.8. Harvest system (Total/ partly)

You are requested to depute one of your Fishery Officer to oversee the above harvesting issue the Traceability Certificate as per provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997.

Signature of the Owner/Partner/
Director of the fish processing plant/firm/
fish exporter

Place: __________________

Date: ___________________

 

FORM F-2

Application For Issue of Certificate of Quality and Origin/Health Certificate for Export of
Aquaculture based Fish and Fishery Products

Fish Inspection and Quality Control Rules, 1998
(See rule 18 A)

I/We intend to make following shipment to __________________ (City/Port/Country) __________________ as per details given below:

1. Name of fish and fishery product: __________________

2. (Frozen/canned fish or shell fish or any other product)

3. Source of Fish (Wild/Aquaculture)__________________

4. No. of Master Cartons & details:__________________

5. 4. Total weight in Kg :__________________

6. 5. Quality/Brand Name:__________________

7. Name of the buyer/importer: __________________

8. Name of the vessel:__________________

9. 8. Destination: __________________

10. Shipping Marks:__________________

11. Date of shipment:__________________

12. Registration Certificate MFD/R.C.No. __________________ Dated __________________.

The above consignment is stored in our fish processing plant ______________ at and maintained at temperature -18 C/ __________________C.

Data related to traceability is given in the attached table. You are requested to depute one of your Fishery Officer to inspect the above consignment and arrange for is~ue of Certificate of Quality and Origin as per provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997.

Copies of invoice, undertaking, relative shipping documents together with the required inspection fee are enclosed for further processing at your end.

Signature of the Owner/Partner/
Director of the fish processing plant/firm/
fish exporter

Place: __________________

Date: ___________________

 

Table for Traceability of aquaculture products

Sr. No. LCA name LCA T.C. No Total Product Quantity
    (KGs)

 

Signature of the Owner/Partner/
Director of the fish processing plant/firm/
fish exporter

Place: __________________

Date: ___________________

 

 

FORM "G"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

Fish Harbour, West Wharf

Karachi 74000, Pakistan

CERTIFICATE OF QUALITY AND ORIGIN/HEALTH CERTIFICATE

[ See rule 18(ii) ]

The undermentioned consignment of fish and fishery products processed and packed by M/S ______________________________ at their processing facilities at ___________________ for export to under the shipping mark s.s. _________________ /by air/ by land.

Invoice No. _________________________________ dated __________________________

Commodity ________________________________________________________________ Packing ________________________________________________________________

Net Weight ________________________________________________________________

Form "E" No. ______________________________________________________________

The above consignment has been inspected on and is found to be wholesome and fit for human consumption. It is packed and is processed as per provisions and rules of the Pakistan Fish Inspection and Quality Control Act, 1997. This consignment is of Pakistan Origin.

Signature and seal of

Fishery Officer or any

Authorized Officer of

Marine Fisheries Department

Government of Pakistan

Ministry of Food, Agriculture & Livestock

Place: __________________

Date: ___________________

N.B. This certificate does not absolve the responsibility of the exporter from overall quality, quantity and any other shortcoming of the consignment.

 

FORM G-1
Local Competent Authority for Marine Fisheries Department
(Punjab, Sindh, Balochistan, KP, AJK, GB)

(Aquaculture Product Traceability Form)

Fish Inspection and Quality Control Rules, 1998
(See rule 18 A)

LCA Name: ....................................................................

Registration Certificate (R.C. No.): ...............................................

Date of issue: ......................................................

I/We intend to make fish pond harvesting of ( .................. ) number of ponds at our registered fish/shrimp farm located at ......................................................................... as per details given below:

1. Farm Information

1.1. Aqua farmer Group

1.2. Name of Farmers

1.3. Address

1.4. Pond Code

1.5. Feed Supplier

1.6. Type of Fish/shrimp

1.7. Date of harvest

1.8. Source of seed

1.9. Date of stocking

1.10. Last Date using medicine

1.11. Date of residue sampling for the last 2 years

1.12. Average weight of harvest-piece/kg

1.13. Total weight of harvest (kg)

1.14. Harvest system (Total/ partly)

1.15 GAP Certificate Status)

2. Transportation Form

2.1. Name of Transporter Company/middlemen)

2.2. Vehicle registration number/middlemen address)

2.3. Name of DriverN ehicle Registration number

2.4. Date of transportation and invoice number

I, hereby, certify that the above infom1ation is true.

Signature and seal of Fisheries Officer of
Local Competent Authority

Stamp: __________________

Place: __________________

Date: ___________________

 

FORM G-2

Marine Fisheries Department

CERTIFICATE OF QUALITY AND ORIGIN/HEALTH CERTIFICATE FOR EXPORT OF
Aquaculture based Fish and Fishery Products

Fish Inspection and Quality Control Rules, 1998
(See rule 18 A)

The undermentioned consignment of fish and fishery products processed and packed by M/S __________________ at their processing facilities at __________________ for export to under the shipping marks.__________________ /by air/ by land.

Invoice No. __________________ dated __________________ Commodity__________________

Packing __________________ Net Weight __________________ Form "E" No. __________________

Product traceability numbers are given in attached table, (Copy of the table provided by the exporter is attached).

The above consignment has been inspected on and is found to be wholesome and fit for human consumption. It is packed and is processed as per provisions and rules of the Pakistan Fish Inspection and Quality Control Act, 1997. This consignment is of Pakistan Origin.

Registration Authority
Marine Fisheries Department
Government of Pakistan
Ministry of Maritime Affairs

Place: __________________

Date: ___________________

 

 

FORM "H"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock

REFUSAL FOR ISSUE OF CERTIFICATE OF QUALITY AND ORIGIN/HEALTH CERTIFICATE

[ See rule 18(ii) ]

We have examined the undermentioned consignment processed and packed by ___________ at _________________________________ for export to M/s _________________________ under the shipping marks ________________ per ss. _____________/ by air.

_________ Master cartons as per invoice

Examination of the above mentioned consignment indicates that it does not conform to the provision and rules of the Paksitan Fish Inspection and Quality Control Act, 1997 for resources given below.

a) ______________________

b) ______________________

c) ______________________

It is, therefore, regretted that your request for issue of certificate of quality and origin for export of the above consignment cannot be acceded to.

However, you may apply for re-inspection of the above consignment under rule 21(l} of the above Act.

Signature and seal of

Fishery Officer or any

Authorized Officer of

Marine Fisheries Department

Government of Pakistan

Ministry of Food, Agriculture & Livestock

Place: __________________

Date: ___________________

 

FORM H-1

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

Refusal for issuance of certificate for Registration of Fish/Shrimp Farm

Fish Inspection and Quality Control Rules, 1998
(See rule 9 A)

We have examined the undermentioned aquaculture establishment for which application of registration was submitted by Mr. ................................... for M/s ................................... addressed at ................................... on (date) ................................... .The evaluation team has examined the above said aquaculture establishment and has rejected the application as the facility do not confirm to the provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997 on the reason as given below.

a) ________________

b) ________________

c) ________________

It is, therefore, regretted that your request for issue of registration certificate cannot be acceded to.

However, you can apply for registration on Form "A" after the conditions and provisions /rules of the above Act are completely fulfilled.

Signature and seal of Fisheries Officer of 

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

Place: __________________

Date: ___________________

 

FORM H-2

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

Refusal for issuance of certificate for Registration of Fish/Shrimp hatchery

Fish Inspection and Quality Control Rules, 1998
(See rule 9 A)

We have examined the undermentioned Fish/Shrimp hatchery for whlch application of registration was submitted by Mr. ............................. for M/s ................................... addressed at ............................. on (date).............................  The evaluation team has examined the above said fish/shrimp hatchery and has rejected the application as the facility do not confirm to the provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997 on the reason as given below.

a) ________________

b) ________________

c) ________________

It is, therefore, regretted that your request for issue of registration certificate cannot be acceded to.

However, you can apply for registration on Form "A" after the conditions and provisions /rules of the above Act are completely fulfilled.

Signature and seal of Fisheries Officer of 

Fisheries Department

(Punjab, Sindh, Balochistan, KP, AJK, GB)

Place: __________________

Date: ___________________

 

 

FORM "I"

Government of Pakistan

Marine Fisheries Department

Ministry of Food, Agriculture & Livestock -

APPLICATION FOR RE-INSPECTION FOR ISSUE OF CERTIFICATE OF QUALITY

AND ORIGIN/HEALTH CERTIFICATE FOR EXPORT OF FISH AND FISHERY PRODUCTS

[ See rule 21(i} ]

Whereas we have been refused certificate of quality and origin vide letter No. ________ dated __________ we request for re-inspection of the following consignment for shipment to ________________ (City/Port) __________ (Country) as per details given below:

1. Name of fish and fishery product: (Frozen/canned fish or shell fish or any other product) _____________________________

2. No. of Master Cartons & details: ________________________________

3. Total weight in Kg : 4. Quality/Brand Name: ________________________________

5. Name of the buyer/importer: ________________________________

6. Name of the vessel: ________________________________

7. Destination: ________________________________

8. Shipping Marks: ________________________________

9. Date of shipment: ________________________________

10. Registration Certificate MFD/R.C.No. ___________________ Dated _______________

The above consignment is stored in our fish processing plant at and maintained at temperature -18 C/ ___________ C. You are requested to depute your representative to inspect the above consignment and arrange for issue of Certificate of Quality and Origin as per provision and rules of the Pakistan Fish Inspection and Quality Control Act, 1997.

Copies of invoice, undertaking, relative shipping documents together with the required inspection fee are enclosed for further processing at your end.

Signature of the Owner/Partner/ Director

of the fish processing plant/firm/fish exporter

Place: __________________

Date: ___________________

ANNEXURE-X

To the top

“OWN CHECK" SYSTEM

1. In accordance with the Clause 6(iv) of these Rules, guidelines must be laid down for application of principles on which own checks are to be based. These checks involves all those actions aimed at ensuring and demonstrating that fresh, frozen and processed fish and fishery products satisfy the requirements of these rules. These actions must correspond to an approach internal to the establishment and they must be developed and implemented by the persons responsible for each unit.

a) as part of internal approach, the establishment may use guides of Good Manufacturing Practice drawn up by appropriate professional organizations and acceptable to the competent authority.

b) the persons responsible for the establishment must ensure that all staff concerned for "own checks' receive adequated training in order to effectively participate in the implementation process.

2. "Critical Point" i.e. any point, step or procedure at which control can be applied and a food safety hazard can be prevented, eliminated or reduced to acceptable levels. All critical points which are useful for ensuring compliance with the hygiene requirements of these Rules must be identified. For the purpose of identifying these critical points, Appendix-I of this Annexure shall apply.

a) the critical points are specific to each establishment depending on the raw materials it uses and on its manufacturing process, structures and equipments, and products and monitoring system.

3. Monitoring and checking such critical points includes all those observations and/or measurements necessary to ensure that critical points are kept under control. Monitoring and checking critical control points does not include verifying that end products conform to the standard laid down in these rules. For the purpose of introducing and implementing, monitoring and checking, Appendix-II of this Annexure shall apply. 4. Sampling for laboratory analysis is intended to confirm that the own checks system complies effectively.

a) the persons responsible for the establishment must make provision for a sampling programme which though not concerning systematically every production batch/code, nevertheless allows:

i) validation of the own check system when first set up;

ii) if necessary, revalidation of the system in case of change to the characteristics of the product or to the manufacturing process;

iii) verification at specific intervals that all provisions are still appropriate and properly complied with.

b) own checks system shall be conform with the provisions set out in Appendix-III of Annexure-X.

5. For the approval of laboratories, the competent authority shall take into account the requirements of good laboratories practices (GLP). However, for the approval of establishments internal laboratories, the competent authority may base on less restrictive principles.

6. In order to keep a "written record", the persons responsible for the establishment must document all information relating to the implementation of own checks and their verification.

a) the documentation should include the following information to be kept for submission to the competent authority:

i) a detailed and comprehensive document including:

- description of the product;

- description of the manufacturing process indicating critical points;

- for each critical point, identified hazards, assessments of risks and control measures;

- procedures for monitoring and checking at each such critical point with identification of critical limits for parameters that need to be controlled and corrective action to be 'taken in case of loss of control;

- procedure for verification and review.

ii) records of observations and/or measurements, the results of verification, reports and written accounts of decisions relating to corrective action, when taken. An appropriate document management system should be provided for easy retrieval of all documents relating to an identified production batch/code.

7. The competent authority shall ensure appropriate training of inspection staff authorized to perform official checks to allow them to assess own-checks system set up by the persons responsible for the establishment on the basis of the documents submitted.

8. A model of a logical approach should be followed, of which the following principles form the essential components:

- Identification of hazards, analysis of risks and determination of measures necessary to control them;

- Identification of critical points;

- Establishment of critical limits for each critical point;

- Establishment of corrective action to be taken when necessary;

- Establishment of monitoring and checking procedures;  -Establishment of verification and review procedures;

- Establishment of documentation concerning all procedures and records;

APPENDIX -I

IDENTIFICATION OF CRITICAL POINTS

1. Assembly of a multidisciplinary team. This team, which involves all parts of the enterprise concerned with the product, needs to include the whole range of specific knowledge and expertise appropriate to the products under consideration, its production (manufacture, storages, and distribution, its consumption and the associated potential hazards.

Where necessary, the team will be assisted by specialists who will help it to solve its difficulties as regards assessment and control of critical points.

The team may consist of:

- a quality control specialist who understands the biological, chemical or physical hazards connected with a particular product group;

- a production specialist who has responsibility for or is closely involved with the technical process of manufacturing the product under study;

- a technician who has a working knowledge of the hygiene and operation of the process plant and equipment;

- any other persons with special knowledge of microbiology, hygiene and food technology.

One person may fulfill several of these roles, provided all relevant information is available to the team and is used to ensure that the own checks system developed is reliable. Where expertise is not available in the establishment, advice should be obtained from other sources (consultancy, guides of good manufacturing practice, etc.)

2. Description of the product

The end product should be described in terms of:

- Composition (e.g. heating, freezing, drying, salting, smoking, etc. and to that extent).

- packaging (e.g. hermetic vacuum, modified atmosphere).

- storage and distribution conditions.

- required shelf life (e.g. sell by date and best before date) .

- instructions for use.

- any microbiological or chemical criteria applicable

3. Identification of intended use The multidisciplinary team should also define the normal or expected use of the product by the customer and the consumer target groups for which the product is intended. In specific cases, the suitability of the product for particular groups of consumers, such as institutional caterers, travellers, etc. and for vulnerable groups of the population may have to be considered.

4. Construction of a flow diagram (description of manufacturing process) Whatever the format chosen, all steps involved in the process, including delays during or between. steps, from receiving the raw materials to placing the end product on the market, through preparation, processing, packaging, storage and distribution, should be studies in sequence and presented in a detailed flow diagram with sufficient technical data.

Types of data may include but are not limited to:

- Plan of working premises and ancillary premises.

- equipment layout and characteristics.

- sequence of all process steps (including the incorporation of raw materials, ingredients, or additives and delays during or between steps).

- technical parameters of operations (in particular time and temperature, including delays) flow of products (including potential cross-examination).

- segregation of clean and dirty areas (or/high/low risk areas)

- cleaning and disinfections procedures.

- hygienic environment of the establishment.

- personnel routes and hygienic practices. - product storage and distribution conditions.

5. On-site confirmation of flow diagram. After the flow diagram has been drawn up, the multidisciplinary team should confirm it on site during, operation hours. Any observed deviation must result in an amendment of the original flow diagram to make it accurate.

6. Listing of hazards and control measures. Using the confirmed flow diagram as a guide, the team should:

a) list all potential biological, chemical or physical hazards that may be reasonably expected to occur at each process step (including acquisition and storage of raw materials and ingredients and delays during manufacture). A hazard is a potential to cause harm to health and is anything covered by the hygiene objectives of this notification. Specifically, it can be any of the following:

- unacceptable contamination (or recontamination) of a biological (micro organisms. parastites), chemical or physical nature of raw materials intermediate products or final products.

- unacceptable survival of multiplication of pathogenic micro-organisms and unacceptable

- generation of chemicals in intermediate products, final products, production line or line environment.

- unacceptable production or persistence of toxins or other undesirable products of microbial metabolism.

For inclusion in the list, hazards, must be of a nature such that their elimination or reduction to acceptable levels is essential to the production of safe food.

b) Consider and describe what control measures, if any, exist which can be applied for each hazard. Control measures are those actions and activities that can be used to prevent hazards, alienate them or reduce their impact or occurrence to acceptable levels. More than one control measure may be required to control an identified hazard and more than one hazard may be controlled by one control measure. For instance, pasteurization or controlled heat treatment may provide sufficient assurance of reduction of the level of both salmonella and listeris.

Control measure need to be supported by detailed procedures and specifications to ensure their affective implementation. For instance, detailed cleaning schedule process heat treatment specifications, maximum concentrations of preservatives used in compliance with the applicable rules on additives of the importing countries.

 

To the top

 

7. Methods for identification of critical points. The identification of a critical points for the control of a hazard requires a logical approach. Such an approach can be facilitated by the use of a decision tree. For the application of the decision tree, each process step identified in the flow diagram should be considered in sequence. At each step, the decision tree must be applied to each hazard that may be reasonably expected to occur or be introduced and each control measure identified. Application of the decision tree should be flexible and requires common sense, having consideration for the whole manufacturing process in order to avoid, whenever possible, unnecessary critical points.

8. Action to be taken following identification of a critical point: The identification of critical points has two consequences for the multidisciplinary team which should then:

- Ensure that appropriate control measures are effectively designed and implemented. In particular, if a hazard has been identified at a step where control is necessary for product safety and no control measure exists at that step, or at any other, then the products or process should be modified at that step, or at an earlier or later stage, to include a control measure;

- establish and implement a monitoring and checking system at each critical point.

APPENDIX -II

ESTABLISHMENT AND IMPLEMENTATION OF MONITORING AND CHECKING CRITICAL POINTS

An appropriate monitoring and checking system is essential to ensure the effective control of each critical point. To develop such a system, following activities may be undertaken.

1. Establishment of critical limits for each control measure associated with each critical point.

Each control measure associated with a critical point should give rise to the specification of critical limits. These critical limits correspond to the extreme values acceptable with regard to product safety. They separate acceptability from unacceptability. They are set for observable or measurable parameters which can readily demonstrate that the critical point is under control; they should be based on substantiated evidence that chosen values will result in process control. Examples of such parameters include temperature, time, pH, moisture level, additive, preservative or salt level, sensory parameters such as visual appearance or texture, etc. In some cases, to reduce the risk of exceeding a critical limit due to process variations, it may be necessary to specify more stringent levels (i.e. target levels) co assure that critical limits are observed. Critical limits may be derived from a variety of sources. When not taken from regulatory standards (e.g. frozen storage temperature) or from existing and validated guides of good manufacturing practices), the team should ascertain their validity relative to the control of identified hazard and critical points.

2. Establishment of a monitoring and checking system for each critical point

An essential part of own-checks is a programme of observations or measurements performed at such critical point to ensure compliance with specified critical limits. The programme should describe the methods, the frequency of observations or measurement and the recording procedure. Observations or measurements must be able to detect loss of control of critical points and provide information in time for corrective action to be taken.

Observations or measurements may be made preferably, continuously. When observations or measurements are not continuous, it is necessary to establish a frequency of observations or measurements which provides reliable information.

The programme of observations or measures should properly identify for each critical point:

- who is to perform monitoring and checking.

- when monitoring and checking is performed.

- how monitoring and checking is performed

3. Establishment of a corrective & action plan

Observations or measurements many indicate:

- that the parameter monitored tends to deviate from its specified critical limits, indicating a trend towards loss of control. Appropriate coercive action to maintain control must be taken before the occurrence of hazard.

- that the parameter monitored has deviated from its specified critical limits and indicating a loss of control. It is necessary to take appropriate corrective action to regain control.

Corrective action has to be planned in advance by the multidisciplinary team, for each critical point, that it can be taken without hesitation when deviation is observed.

Such corrective action should include:

- proper identification of the person(s) responsible for the implementation of the corrective action.

- description of means and action required to correct the observed deviation.

- action to be taken with regards to products that have been manufactured during the period when the process was out of control.

- written record of measures taken.

APPENDIX -III

VERIFICATION OF OWN-CHECKS SYSTEM

To the top

 

Own checks system verification is necessary to ensure that they are working effectively. The multidisciplinary team should specify the methods and procedure to be used. Usable method may include in particular random sampling and analysis, reinforced analysis or tests at selected critical points, intensified analysis of intermediate or final products, surveys on actual condition during storage, distribution and sale and on actual use of the product.

Verification procedures may include: inspection of operations, validation of critical limits, review of deviations, corrective action and measures taken with regard to the product, audits of the own-checks system and its records.

Verification should provide for confirmation of the suitability of the own-checks system established and ensure, afterwards, with an appropriate frequency, that the provisions laid down are still being properly applied.

In addition, it is necessary to revive the system, to ensure that it is (or will be) still valid in case of change.

Examples of change include:

- change in raw material or in product, processing conditions (factory layout and environment, process equipment, cleaning and disinfection programme),

- change in packaging, storage or distribution conditions,

- change in consumer use,

- receipt of any information on a new hazard associated with the product.

Where necessary, such a review must result in the amendment of the provisions laid down. Any change to the own-checks system arising should be fully incorporated into the documentation and recordkeeping system in order to ensure that accurate up-to-date information is available. Where criteria are specified in regulations, such criteria are to be used as reference values for the verification process.

Schedule- I

1. SPECIFICATIONS FOR SHRIMPS/PRAWNS

(a) General: Appearance and colour shall be characteristics to particular type/form of fresh/freshly cooked shrimps/prawns as the case may be. The material shall be reasonably free from dehydration, discolouration and black spots (melanosis). The material shall not show any sign of deterioration and shall be free from all off odour. The texture of meat shall be soft and consistent and shall have characteristic flovour of fresh/cooked shrimps,/prawns. The products shall be free from extraneous matter.

(b) Bacteriological:

Frozen/Chilled Products

Total plate Count at 37 C per gm (Total Aerobic Count.)

< 100,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

2. SPECIFICATION FOR SPINY/SLIPPER LOBSTERS IN ANY FORM

(a) General: Appearance and colour shall be characteristics to the particular type/form for fresh/freshly cooked lobsters as the case may be. The material shall be free from dehydration, discolouration and extraneous matter. The product shall not show any sign of deterioration. The product shall be free from off odour. The material shall be free from extraneous matters like sand, dirt, etc. The material shall be free from eggs. Lobster of uniform sized shall be packed together. Texture of the meat shall be soft and consistent.

(b) Bacteriological:

Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

3. SPECIFICATION FOR CEPHALOPODS (CUTTLEFISH, SQUID, OCTOPUS ETC.) AND THEIR BODY PARTS INCLUDING ROES

(a) General: Cephalopods of different varieties/species shall not' be packed together. Material of uniform colour and size shall be packed together. The product shall be clean and shall be characteristics to the particular type/form appearance, colour and odour of fresh/freshly cooked cephalopods. The product shall not have dark red colouration which is indicative of poor quality. The product shall be free from dehydration, discolouration and extraneous matter. The product shall not show any sign of deterioration and extraneous material. Texture of the meat shall be soft and consistent.

(b) Bacteriological: Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

4. SPECIFICATIONS FOR FIN FISHES- WHOLE, DRESSED, FILLETS OR ANY OTHER TYPE

(a) General: Fishes/fillets of uniform size and colour shall be packed together. Fishes/fillets of different species shall not be packed together. The product shall be clean and shall have appearance, colour and odour characteristics to the particular type/form or fresh/ freshly cooked fishes. The products shall be free from dehydration, discolouration and extraneous matter. The product shall not show any sign of deterioration. The product shall be free from off odour. The products shall be free from softening of texture and any objectionable extraneous matter.

b) Bacteriological: Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

To the top

 

5. SPECIFICATION FOR CRAB AND CRAB MEAT

(a) General: Crab/crab meat of uniform size and colour shall be packed together. Body meat and claw shall be packed separately or as sandwich pack or any other manner as required by the buyer. The material shall be clean having characteristics of the particular type/form appearance, colour and adour of fresh/freshly cooked crabs as the case may be and shall not have deterioration and off odour. The product shall be reasonably free from dehydration, discoloration and objectionable extraneous matter and shall be soft and consistent. Crab meat shall be reasonably free from shell or shell pieces.

(b) Bacteriological: Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<500,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

7. SPECIFICATION FOR GASTROPODS (WHELK, ARK SHELLS, SNAILS ETC.)

(a) General: Appearance, colour and odour shall be characteristics to the particular type/form of fresh/cooked gastropod as the case may be. The products shall reasonably be free from dehydration and discolouration and shall not have any sign of deterioration and off odour. The products shall be free from extraneous matter and sand and shall not show grittiness. Texture shall be soft and consistent. Gastropod meat shall be reasonably free from shell or shell pieces. (N.B. The gastropod treated with hot water for removing the meat from shell shall be treated as raw).

(b) Bacteriological: Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<300,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

8. SPECIFICATION FOR BIVALVES (CLAMS, OYSTERS, MUSSELS, SCALLOPS, RAZOR CLAMS ETC.)

(a) General: Appearance and colour of the product shall be characteristics to the particular type/form of fresh/ cooked bivalves as the case may be. The product shall have characteristics odour of fresh cooked bivalves. The product shall not show any sign of deterioration. The product shall be free from off odour and sand (grittiness detected by chewing) and objectionable foreign matter. The texture of meat shall be soft and consistent. (N.S. The bivalve treated with hot water for removing the meat from shell shall be treated as raw).

(b) Bacteriological: Frozen/Chilled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<300,000

E. coli count/gm

<20

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

Cooked/boiled Products

Total Plate Count at 37 C per gm

(Total Aerobic Count)

<100,000

E. coli count/gm

nil

Staphylococcus aureaus (Coagulase positive)

<100

Salmonella spp.

nil

 

(b) Parasites                                            nil

(3) Mercury level                                     <0.5 ppm

 

9. SPECIFICATION FOR CANNED PRODUCTS

As per requirements of the importing countries.

Schedule-I-A

VETERINARY MEDICINE/ANTIMICROBIAL AGENTS CONDITIONS FOR
AQUACULTURE ESTABLISHMENTS

Permitted Veterinary Medicines

Table 1: Permitted veterinary medicines, as reference, for use in aquaculture and Maximum Residue Limits in aquaculture products as per importing countries

Veterinary medicine United States European Union Japan Chile Seychelles
Oxvtetracvclinc 2,000 ug/kg 100 ug/kg 200 ug/kg 100 ug/kg 100 ug/kg
Oxolinic acid Absence 100 ug/kg Absence 100 ug/kg 300 ug/kg
Flumeouine Absence 600 ug/kg Absence 600 ug/kg 600 ug/kg
Sulfadiazine Absence 100 ug/kg Absence Absence Absence
Trimetrooim Absence 50 ug/kg Absence Absence 50 ug/kg
Florfenicol Absence 1000 ug/kg Absence 1,000 ug/kg Absence
Erythromyein Absence 200 ug/kg Absence 200 ug/kg 200 ug/kg
Enrofloxacin Absence 100 ug/kg Absence Absence Absence
Amoxicillin Absence 50 ug/kg Absence Absence 50 ug/kg
Spiramycin Absence Absence 200 ug/kg Absence Absence
Ivermectin Absence Absence Absence Absence Absence
Emamectin benzoate Absence 100 ug/kg Absence 100 ug/kg Absence
Diflubenwron Absence 100 ug/kg 100 ug/kg - 1,000 ug/kg
Deltamethrin Absence 10 ug/kg 30 ug/kg - Absence
Ampicillin Absence Absence Absence Absence 50 ug/kg
Sarafloxacin Absence Absence Absence Absence 30 ug/kg
Chlorotetracvcline Absence Absence Absence Absence 100 ug/kg
Tetracyclin Absence Absence Absence Absence 100 ug/kg
Teflubenzuron Absence Absence Absence Absence 500 ug/kg
Cypermethrin Absence Absence Absence Absence 50 ug/kg
Sulphonamides Absence Absence Absence Absence 100 ug/kg
Tosylchloramide sodium Absence Absence Absence Absence Absence
Tricaine mesilate (MS222) Absence Absence Absence Absence Absence
Formalin Absence Absence Absence Absence Absence
Methyltestosterone Absence Absence Absence Absence Absence
Copper sulfate Absence Absence Absence Absence Absence
Potassium permagante Absence Absence Absence Absence Absence

 

Table 2: Permitted anesthetic agents along with their withdrawal time limit

Anesthesia Trade name Total Dosage Mode of application Withdrawal period
Eugenol Aqui-S20E® 10-50 mg/l immersion 72 hours
Metomidate Aquacalm® 2-10 mg/l immersion Not for use in food fish
Tricaine methanesulfonate(MS-22) Tricaine-S® 40-250 mg/l immersion 21 days

Table 3: Permitted hormones in aquaculture farmingg

Hormoae Trade name Total Dosage Purpose Mode of application Approved Status Withdrawal time
Female Male
Chorionic gonadotropin Chorulon 250 IU/kg      125 IU/kg  Spawning aid injection FDA approved None (brood stock)
sGnRHa+domperidone Ovaprime 0.3-0.6 ml/kg 01.-0.2 ml/kg Spawning aid injection The Index Not for use in fish

 

Table 4: Heavy metals and their permissible limit

 

Sr. No. Heavy metals Permissible limits
1.  Mercury

0.5-1.0 ppm  (mg/kg of fresh weight)

2. Lead

0.2-0.4 ppm  (mg/kg of fresh weight)

3. Cadmium

0.05-0.l ppm (mg/kg of fresh weight)

4. Copper

73.7 mg/kg

5. Chromium

50 mg/kg

6. Nickel

67.9 mg/kg

7. Selenium

10 mg/kg

8. Aluminum

0.2 mg/kg

9. Arsenic 50 mg/kg
10. Fe

425.5 mg/kg

11. Zinc

99.4 mg/kg

Schedule- II

CRITERIA FOR POTABLE WATER FOR HUMAN CONSUMPTION

S.NO.

Parameter

Expression of the result

Guide level

Admissible level

1

Colour

mg/1 pt/Co Scale

1

20

2

Turbidity

mg/1 Sio2

1

10

3

Odour

Dilution number

O-odourless

O-odourless

4

Taste

Dilution number

O-odourless

Tasteless

5

Hydrogen ion

concentration

pH unit

7.0

6.5 to 8.5

6

Conductivity

Us cm-1 at 20C

400

-

7

Chlorides

Cl mg/1

25

-

8

Sulphastes

SO 4 mg/1

25

9

Silica

Sio2 mg/1

As per WHO

Standard

WHO Standard

10

Calcium

Ca mg/1

100

11

Magnesium

Mg mg/1

30

50

12

Sodium

Na mg/1

20

150

13

Potassium

K mg/1

10

12

14

Alumunium

Al mg/1

0.05

0.2

15

Total hardness

Ca mg/1

60

16

Dry residues

mg/1 after drying at 180C

1000

17

Dissolved oxygen

02 mg/1

WHO Standard

WHO Standard

18

Free carbon di

oxide

Co2 mg/1

WHO Standard

19

Nitrates

NO3 mg/1

25

20

Nitrites

NO2 mg/1

-

21

Ammonium

NH4 mg/1

0.05

22

Nitrogen

N mg/1

-

1

23

Hydrogen sulphide

S ug/1

-

-

24

Phenol

C6H5OH ug/1

-

0.5

25

Boron

B ug/1

1000

-

26

Organochlorine

compounds

ug/1

1

-

27

Iron

Fe ug/1

50

200

28

Manganese

Mn ug/1

20

50

29

Copper

Cu ug/1

100

-

30

Zinc

Zn ug/1

100

-

31

Phosphorus

P2O5 ug/1

400

5000

32

Fluoride

F ug/1

-

1500

33

Cobalt

Co ug/1

WHO Standard

34

Suspended solid

-

NIL

35

Residual chlorine

Cl mg/1

-

-

36

Barium

Ba ug/1

100

-

37

Silver

Ag ug/1

WHO Standard

10

38

Arsenic

Ag ug/1

-

50

39

Cadmium

Cd ug/1

-

5

40

Cyanides

CN ug/L

-

50

41

Chromium

Cr ug/1

-

50

42

Mercury

Hg ug/1

0.5

1

43

Nickel

Ni ug/1

-

50

44

Lead

Po ug/1

-

50

45

Antimony

So ug/1

-

10

46

Selenium

Se ug/1

-

10

47

Vanadium

V ug/1

WHO Standard

48

Pesticides and

related products

ug/1

-

0.1

49

Polycyclic aromatic

compounds

Ug/1

-

0.1

50

Alkalinity

30 mg/1 HCO3

 

 

SCHEDULE-II-A

Table 5: Summary of water quality criteria for freshwater aquaculture

Sr. No. Parameter Unit Optimal Range Normal Range
1. Temperature 0C 24-32 18-32
2. Temperature For Cold Water Fisheries Only 0C 10-20 15-18
3. Water Transparency Inch. 12-16 20-Aug
4. pH - 7.5-8.5 6.5-9.5
5 Dissolved Oxygen mg/ 4-11 11-Mar
6. Total Alkalinity mg/L 80-150 60-300
7. Tomi Hardness mg/L 80-150 60-300
8. Free Co2 mg/L 5-15 5-30
9. Total Ammonia Nitrogen mg/L < 1.00 1.00-3.00
10. Total Nitrate Nitrogen mg/L < 5.00 < 5.00
11. Nitrite Nitrogen mg/L < 0.01 -
12. Hydrogen Sulphide mg/L < 0.03 -
13. Total Suspended Solids (Tss) mg/L 30-100 30-200
14. Total Dissolved Solid (Tds) mg/L < 500 >500
15. Cadmium mg/L < 0.005 .
16. Copper mg/L < 0.006 .
17. Mercury mg/ <0.0002 -
18. Lead mg/ <0.02 -
19. Zinc mg/ <0.005 -
20. Endrin ppb <0.003 -
21. Endosulpban ppb <0.01 -
22. Aldrin ppb <0.01 -
23. Dieldrin ppb <0.005 -
24. Chlordane ppb <0.004 -
25. DDT ppb <0.003 -
26. Diazinon ppb <0.002 -
27. Malathion ppm <0.008 -
28. Trichlorphon ppb <0.001 -
29. Pyrethrin Insecticide ppb <0.001 -
30. Rotenone Piscicides ppm 0.5-4 -
31. Chlorine ppm <0.003 -
32. Copper Sulphate ppm <0.002 -
33. Glyphosate ppm - 30-Oct
34. 2.4-D ppm <0.004 -
35. Simazine ppm <0.01 -
36. Detergents ppm <0.1 -

 

Units:

Mg/L refers to milligram per litre

Ppb refers to Parts per billion

Ppm refers to parts per million" ; and

 

SCHEDULE-III

*updated S.R.O. 527(I)/2024

Rates of fee for grant of registration certificate for fish processing plant, firm or fish exporters

Sr. No. Description Rates
a. Application form “A” for registration of fish processing plant, firm or fish exporter. Free (Available Online)
b. Registration of the fish processing plant/ establishment. Rs. 100,000
c. Renewal fee for registration of the fish processing plant, (Freezing/ Canning plant, firm or fish exporter) within one month. Rs. 50,000
d. Renewal fee for registration after expiry of one month. Rs. 60,000
e. Duplicate Registration certificate Rs. 30,000

 

 

To the top

 

SCHEDULE-III-A

Rates of fee for grant and registration certificate for fish processing plant, firm of fish or fish exporters:-

a. Application form "A-1 for registration of aquaculture establishments (hatchery, fish fann and/or fish mill)         Free

b. Registration of aquaculture establishment (hatchery, fish farm and/ or fish mill)                                                Rs. 2000

c. Renewal fee for registration aquaculture establishment (hatchery, fish farm and/ or fish mill)                            Rs.1000

d. Renewal fee for registration after expiry of one month.                                                                                       Rs. 2000

e. Duplicate Registration certificate                                                                                                                          Rs. 5000;

 

SCHEDULE-IV

*updated S.R.O. 527(I)/2024

Rates of fee for issue of certificate of quality and Origin and other certificates for export of fish and fishery products and for analysis of various parameters: -

Sr. No. Description Rates
a.

Certificate of Quality and Origin

(1) By air shipment

(2) By sea shipment

 

Rs.10,000/-

Rs.10,000/-

b. Any other certificate to meet the requirement of the importing country of buyer requirement or for any other purposes. Rs.2,000/-
c. Results of any specific tests (cost of tests will be in addition to this amount) Rs.5,000/-
d. Organoleptic tests, physical tests, TMA-N or TVB-N, ph etc. Rs.3,000/- for each parameter
e. Heavy metals Rs.5,000/- for each metal/ each sample
f. Microbiological analysis Rs.13,000/- for each sample
g.

Other tests

i. Hisamine

ii. Chloramphenicol

 

Rs.10,000/-

Rs.10,000/-

 

SCHEDULE-IV-A

Rates of fee for issue of traceability certificate and certificate of quality and Origin for aquaculture products for export of fish and fishery products:

a. Traceability Certificate                                                                                             Rs. 1000.00

b. Certificate of Quality and Origin/Health Certificate for aquaculture products          Rs. 1000.00

 

SCHEDULE-V

Hygiene and management requirements of aquaculture establishments

S.No Description Applied to 40% Applied to 50% Applied to 70% Applied 100% Remarks
I. Site location and selection
1. Aquaculture operations should be located in areas where the risk of contamination ·with hazardous chemical effluents is minimal and where sources of pollution can be controlled.
2. Aquaculture operations should be sited at a safe distance from potential sources of water contamination in order to ensure protection of products from contamination.
3.

The immediate vicinity of aquaculture operations should be free of potential sources of water contamination and in particular should not be located downstream and close to -

(a) industrial activity;

(b) intensive agriculture (especially animal husbandry);

(c) densely populated areas or urban areas;

(d) hospitals;

(e) major roads.

4. Before building a land-based aquaculture facility, a survey of the soil should be conducted 10 order to determine the concentration and extent of any parameters which are of importance for the safety of end products, including heavy metals and pesticide residues. Such an analysis should be conducted as a condition of the permit required under clause 3.
5. Cages, pens or any other form of aquaculture enclosures or water intakes should be sited away from routes of water borne traffic, and preferably upstream of any water-borne traffic.
6. Cages, pens or any other fonn of aquaculture enclosures or water intakes should be sited away from and preferably upstream of, any natural or artificial discharges of contamination.          
II. Aquaculture site facilities
7. All aquaculture establishments shall have an adequate number of flush toilets for the use of staff.
8. There shaJI be an adequate number of wash hand basins, and an adequate supply of single use towels or appliances for drying the hands.
9. Sanitary facilities should be located so as to ensure that there is no risk of contamination of fish ponds.          
III. Pond preparation
10. Weeds, rubbish and debris should be removed before preparing aquaculture ponds for filling with water.
11. If necessary ponds should be conditioned with lime and left for a period of at least two weeks before filling and stocking.
12. At least once each year the pond should be drained, allowed to dry out and, if reQuired, re-conditioned with lime.
IV. Aquaculture feeds and feed materials
13. Aquaculture feed stored at the aquaculture facility should be held in a properly constructed and well-ventilated facility, and protected from the entry of insects, birds and rodents.
14. Slaughterhouse waste and offal from mammalian food animals may only be used as a food for fish if it is first cooked.
15. Compound feed should not be used for feeding fish unless the user is informed of the composition, including any supplements added by the manufacturer.
16. Compound feed treated with veterinary medical supplements (including hormones and antibiotics) are considered to be veterinary medicines under Schedule-I-A Table 3 applies.          
V. Harvesting, equipment and materials
17. Harvesting areas and methods within the aquaculture facility should be designed and constructed for easy, fast and hygienic operation.
18. All equipment used for harvesting, catching, sorting, grading, conveying and transporting of aquaculture products should be designed for their rapid and efficient handling without causing mechanical damage
19. Equipment, containers and utensils coming into contact with aquaculture products should be designed and constructed to ensure that they can be adequately cleaned, disinfected and maintained to avoid contamination.
20. All surfaces of boxes, implements and other equipment which come into contact with aquaculture products should be of corrosive resistant material which is smooth and easy to clean, or be designed for a single use only.
21. If re-usable boxes are used to carry aquaculture products from the production area, then a suitable means of cleaning with water and detergent, and disinfection should be provided.
VI. Personal hygiene
22. Any person working at an aquaculture facility shall maintain a reasonable standard personal hygiene and take all necessary precautions to prevent the contamination of the aquaculture products.
23. Any cut or wounds on hands and forearms shall immediately be covered by a suitable water-proof dressing.
24. Persons suffering from infectious diseases, or from a helminthic parasitic infection, or who have infected wounds, boils or other skin infections, or who are suffering from diarrhea are not permitted to work in an aquaculture operation.
25. Personnel who work in aquaculture operations shall, on their appointment and in one year intervals, thereafter, undertake a health test to ensure that they do not suffer from any of the above conditions, Health documents of every person shall be kept at the facility and shall be available to the competent authority on request.
26. Any person entering an aquaculture establishment must refrain from spitting or eating food, urinating or defecating, except in areas or locations designated for these purposes, which must be away from production areas.          
VII. First aid box
27.

Each aquaculture facility shall be provided with a first aid box, which should contain at the minimum -

(a) a sufficient quantity of impermeable dressings;

(b) antiseptic cream or disinfectant;

(c) cotton wool and adhesive tape.

         
VIII. Exclusion of animals
28. Domestic animals should be excluded from aquaculture operations and areas adjacent to ponds.
IX. Cleanine and Disinfection schedule
29. Areas around the ponds should be kept clean and free from rubbish, waste aquaculture products and items not associated with the aquaculture operation.
30. A permanent written cleaning and disinfection schedule should be drawn up to ensure that all parts of the aquaculture facilities and equipment therein are cleaned appropriately and regularly.
31. A named person should be responsible for implementation of the schedule.
32. The schedule should be available for inspection at all times.
33. Aquaculture personnel should be trained in the use of special cleaning tools, methods of dismantling equipment for cleaning and should be knowledgeable in the significance of contamination and the hazards involved.          
X. Fish landing site
34. Each fish landing site, auction or wholesale market shall provide working areas which are of sufficient size for work to be carried out under adequate hygienic conditions.
35. The location, design and layout shall be such as to preclude contamination of the products and to allow peparation of activities which might give rise to contamination of the fish during landing, sale or storage.
36.

In areas where fishery products are handled, displayed or stored there shall be-
a) Protection against the entry of animals and unauthorized personnel to areas where fishery products are held handled or stored

b) Measures to prevent the fishery products from being exposed to direct sunlight during periods when they are displayed for sale;

c) A waterproof non-slip flooring which is easy to clean and disinfect and laid down in such a way as to facilitate the drainage of water;

d) If work is to be conducted at night, adequate artificial lighting;

e) an ~equate number of wash hand basins and an adequate supply of soap, single use towels or appliances for drying the hands;

f) facilities for cleaning and disinfecting tools, equipment and fittings;

g) facilities for the cleaning and disinfection of transport vehicles including vessels, and fishing vessels.

37. Equipment shall be made of corrosion-resistant materials which are easy to clean and disinfect. This shall include inter alia weighing scales, worktables, fish containers and knives.
38. Special water-tight, corrosion-resistant, containers shall be provided for fishery products not intended for human consumption. A separate premise shall be provided for the storage of such containers if they are not emptied at the end of each working day;
39. Facilities shall be provided to ensure adequate supplies of potable water or alternatively of clean sea water treated by an appropriate system, under pressure and in sufficient quantities for processing and hygiene operations
40. There shall be provided an adequate hygienic waste-water disnosal system.
41. The establishment shall have an adequate number of flush toilets. There shall be provided an adequate number of wash basins, and an adequate supply of soap, single use towels or appliances for drying the hands.
42. Rodents, insects and any other vemin shall be systematically exterminated in the area of the fish landing site, auction or wholesale market.          
XI. Disease monitorintg and control system
43. Any person working at an aquaculture establishment(s) shall maintain a hygienic environmental condition and take all necessiry precautions to prevent the breakout of diseases i.e., bacterial, fungal, parasitic or water-borne.
44. Operator of the aquaculture establishment should monitor the health condition of rearing: aquatic products regularly.
45. Aquaculture establishments personnel should be trained in identifying, curing the diseases
46. Aquaculture establishments (hatchery, fish farms and/or feed mills) should maintain record of disease, occurrence of disease, duration of disease, type of disease and type of fish that fall a victim of it, remedial measures, time period of recovery, name and quantity of medicine used for treatment.
47. Recorded data will maintain by establishments that were provided to provincial and federal competent authority on their demand.          
XII. Seed quality
48. Inbreeding, inter-specific hybridization, negative selection of broods, improper bloodstock management should be avoided in hatcheries, farms or aquaculture establishments.
49. Breeding Qf same broods more than one time in a season should never be practice aquaculture establishments
XIII. Brood Bank establishment
50. No person who intends to establish a Brood bank establishment shall operate it until or unless gets· registered from provincial competent authority.
51. Distribution of broods to government and/or private hatcheries from the brood banks and brood management trainings for the hatchery and farm operators must be under hygienic conditions.          
XIV. Pest control systems
52. A permanent written pest control schedule should be drawn up to ensure that all parts of the aquaculture facilities and equipment remain free from infestations of insect and rodent pests.
53. A named person should be responsible for implementation of the schedule.
54. The schedule should be available for inspection at all times.          
XV. Record keeping and batch identification
55. Effective records should be kept of each batch of aquaculture products grown in each pond, and of veterinary drug regimes, feeding methods and quantities, pond fertilizers added and any results of water quality parameters.
56. The records should be kept for a period of one year after harvest.
57. Each batch of aquaculture products leaving the farm for market or for processing should be allocated a batch number which relates it to the information records described below.
58.

Each batch of aquaculture products leaving the aquaculture operation for placing on the market should be marked to include the following information-

(a) Permit number of the aquaculture establishment;

(b) Name of the enterprise;

(c) Date of harvesting;

(d) Species;

(e) Batch number

         
XVI. Traceabllity
59. The traceability of aquaculture products, feeds used in aquaculture systems, and any other substance intended to be, or expected to be, incorporated into an aquaculture product or aquaculture feed shall be established at all stages of production, processing and distribution.
60. Operators of aquaculture establishments shall be able to identify any person from whom they have been supplied with aquaculture products, an aquaculture feed, or any substance intended to be, or expected to be, incorporated into an aquaculture to product or aquaculture feed. To this end, such operators shall have in pl&ce systems and procedures which allow for this information to be made available to the competent authority on demand.
61.

Operators of aquaculture establishments shall have in place systems and procedures to identify the other businesses to which their products have been supplied. This information shall be made available to the competent authority on demand.

62. Aquaculture products or aquaculture feed which is placed on the market or is likely to be placed on the market shall be labelled or otherwise identified through relevant documentation or other information to ensure its traceability.
63. Each operator of an aquaculture establishment must prepare a written recall plan detailing the procedures to be followed in the case that a batch of aquaculture products which has left the possession of the operator showd be ·withdrawn from being placed on the market.          

XVII. Minimum monitoring requirements for the internal control system

64.

Monitoring programmes should be implemented by the operator of an aquaculture establishment to check that-

a). waste and debris e.g. dead or diseased aquaculture products do not build up and are disposed of in a hygienic manner;

b). personal hygiene and health standards are maintained;

c) the pest control programme is implemented;

d) cleaning and disinfecting programmes are implemented;

e) quality of water and ice supply is maintained;

f) aquaculture feeds, feed supplements and other additives applied to aquaculture products do not contain any substances whose use is prohibited by law;

g) withdrawal periods observed in relation to treatment of aquaculture products by permitted veterinary medicines are effective in relation to meeting the requirements for maximum residue limits of those medicines in the final product.

65. The results of all monitoring actions and of any corrective actions take after monitoring must be recorded.          
XVIII. Prohibited Substances
66.

Specific veterinary medicines and medicinal premixes may have prohibition in aquaculture products-

a) Cbloramphenicol and derivatives, e.g. thiamphenicol (T AF);

b) Dimetridazole;

c) Metronidazole;

d) Compounds which produce a nitrofuran metabolite (Furazolidone, Furaltadone, Nitrofuratoitl, Nitrofurazone );

e) Anabolic substances for growth promotion purposes

i. Stilbenes, stilbene derivatives, and their salts and esters

ii. Antithyroid agents

iii. Steroids

iv. Resorcylic acid lactones including zeranol

v. Beta-agonists

(f) Malachite green and leucomalachite green.

67.

Veterinary medicines and medicinal premixes for inclusion in aquaculture product feeds shall not be used if their active ingredients are prohibited for use in food animals as-

a) Anthelmintics

b) Anticoccidials, including nitroimidazoles

c) Carbamates and pyretbroids

d) Sedative

e) Non-steroid anti-inflammatory drugs

XIX. Permitted Substances
68. No veterinary therapeutic products and medicinal premixes for inclusion in aquaculture products feeds may be applied to living aquaculture products unless they are approved for such use under the terms of relevant legislation controlling the imoort distribution and use of medicines.
69. Where no specific legislation is in place controlling the import, distribution and use of medicines, the medicines listed in column 1 of Table 1 in Schedule-I-A shall be permitted to be applied to living aquaculture products, on the condition that residues present in the aquaculture product placed on the market does not exceed the limit indicated in Table 1 for different countries.
XX. Unfit Aquaculture Products
70.

Aquaculture products are to be considered to be unfit for human consumption if

a) They derive from aquaculture products which have been treated by a substance whose use is prohibited under these rules in Section XVIII of Schedule-V.

b) They derive from aquaculture products which have not been produced in accordance with Schedule-I-A;

71. Unfit aquaculture products intended for sale for human consumption are subject to seizure under the powers granted to authorize officers by their respective provincial fisheries department under these Regulations.
XXI. Water quality
72. Operator of the aquaculture establishment should monitor the water quality properties including physical, chemical and biological parameters regularly.          

 

Measures / Standards
# Name Type Agency Description Law Valid To Apply To
1 Registration of Fish processing Plant, Firm or Fish Exporter [Export] Certificate Requirement Marine Fisheries Department Registration of Fish processing Plant, Firm or Fish Exporter [Export] is an official document issued by the Marine Fisheries department. Pakistan Fish Inspection and Quality Control Rules, 1998. 9999-09-09 ALL
2 Activation/Deactivation of registration certificate for fish processing plant, firm or fish exporter Certificate Requirement Marine Fisheries Department Activation/Deactivation of registration certificate for fish processing plant, firm or fish exporter is an official document issued by the Marine Fisheries department Pakistan Fish Inspection and Quality Control Rules, 1998. 9999-09-09 ALL
3 Issuance of Certificate of Quality & Origin / Health Certificate for export of fish and fishery products [Export] Certificate Requirement Marine Fisheries Department Certificate Quality & Origin / Health Certificate for export of fish and fishery products is an official document issued by the Marine Fisheries department Pakistan Fish Inspection and Quality Control Rules, 1998. 9999-09-09 ALL
Have you found this information useful ?
Please share your feedback below and help us improve our content.