ISLAMABAD, MONDAY, JULY 27, 2026
PART II
Statutory Notifications (S. R. O.)
GOVERNMENT OF PAKISTAN
MINISTRY OF ENERGY
(Petroleum Division)
NOTIFICATION
Islamabad, the 27th July, 2026
S. R. O. 1167(I)/2026.—In exercise of the powers conferred by sections 5 and 7 of the Explosives Act, 1884 (IV of 1884), the Federal Government is pleased to make the following amendments in the Explosive Rules, 2010, namely:— In the aforesaid Rules,—
(a) in the preamble, after the digit “5” the word and digit “and 7” shall be inserted;
(b) for the words “Chief Inspector”, wherever occurring, the words “Director General” shall be substituted;
(c) for the words “Deputy Chief Inspector of Explosives”, wherever occurring, the words “Director of Explosives” shall be substituted;
(d) for the words “Inspector of Explosives”, wherever occurring, the words “Deputy Director of Explosives” shall be substituted;
(e) for the words “Assistant Inspector of Explosives”, wherever occurring, the words “Assistant Director of Explosives” shall be substituted;
(f) for the words “Federal Government”, wherever occurring, the words “Secretary of the division concerned” shall be substituted;
(g) in rule 2,—
(i) after clause (b), the following new clause shall be inserted, namely:—
“(ba) “blasting companies” means licensed entities engaged in the professional handling, transportation, storage, and use of explosives for controlled detonation in various applications such as mining, construction, demolition and infrastructure development. These companies are responsible for planning and executing blasting operations in compliance with safety, environmental and regulatory standards;”;
(ii) after clause (h), the following new clauses shall be inserted, namely:— “
(ha) “identification detection agent” means any one of the substances when introduced into an industrial explosive or formulated in such explosives as a part of the manufacturing process in such a manner as to achieve homogeneous distribution in the finished explosives; (hb) “industrial explosive” means an explosive material in form of flexible or elastic sheet formulated with one or more high explosives which in its pure form has a vapor pressure less than 10 Pa at a temperature of 25 ºC, is formulated with a binder material, and is as a mixture malleable or flexible at normal room temperature;”;
(iii) in clause (g), for the words and comma “District Coordination Officer, District Magistrate or Political Agent”, the words “Deputy Commissioner” shall be substituted;
(iv) after clause (g), amended as aforesaid, the following new clause shall be inserted, namely:— “(ga) “division concerned” means the division to which the business of the Act stands allocated”;
(v) after clause (k), the following new clauses shall be inserted, namely:—
“(ka) “NEPSA” means National Explosives and Petroleum Safety Agency;
(kb) “precursor” means a chemical substance that is used as a starting material or intermediate in the synthesis or production of explosives;”;
(vi) after clause (u), the following new clause shall be inserted, namely:—
“(ua) “taggants” means traceable chemical or physical markers added to explosives during production to enable their identification and tracking;”; and
(vii) in clause (w), after the word “Provinces”, wherever occurring, the comma and words “, Gilgit-Baltistan and Azad Jammu and Kashmir” shall be inserted;
(h) in rule 4, in sub-rule (1), clause (i) shall be omitted;
(i) in rule 5,—
(a) in sub-rule (1), after the word “explosive”, the words “and detonators” shall be inserted;
(b) in sub-rule (2), after the word “explosives”, the words “and detonators” shall be inserted; and
(c) after sub-rule (2), the following new sub-rules shall be added, namely:—
“(3) The NEPSA may, from time to time, by notification in the official Gazette, declare any substance which appears to it to be specially dangerous to life or property, by reason either of its explosive properties or of any process in the manufacture thereof being liable to explosion and the same shall be deemed to be an explosive within the meaning of these rules, and the provisions of these rules (subject to such exceptions, limitations, and restrictions as may be specified in the notification) shall accordingly extend to that substance in like manner as if it were included in the definition or the term “explosive” or “Unauthorized Explosive” in these rules.
(4) The licensing authority shall maintain a complete record of every explosive manufactured within the country in accordance with Schedule VIII. All tests prescribed under Schedule VIII shall be conducted in the presence of the regional in-charge of the NEPSA, whose endorsement shall be duly obtained.”;
(j) in rule 6, in sub-rule (1), for clause (a), the following shall be substituted, namely:—
“(a) is the holder of a valid license to possess the explosives or the authorized person of a holder of such a license; or”;
(k) in rule 7, after the word “imported”, the word and comma “, exported” shall be inserted;
(l) in rule 8, in sub-rules (1), after the proviso the provisions 1, 2, and 3 shall be respectively re-numbered as sub-rules (2), (3) and (4) of that rule and thereafter the following new sub-rules shall be added, namely:—
“(5) In the case of detonators, laser-embossed marking shall be provided, while for safety fuse only external marking and on detonating cord external as well as internal marking in accordance with sub-rule (1) shall be applied. The marking on the detonating cord and safety fuse shall be at the interval of 1 foot. The Director General shall have the authority to amend the marking requirements in line with technological advancements and resultant feasibility.
(6) The length of each coil (reel or spool) for detonating cord and safety fuse, shall be up to two hundred and fifty meters and two hundred meters, respectively.
(7) No person shall manufacture (including products of MMU), ship, export, transport, receive, or possess any commercial explosive that does not contain a detection agent or an identification taggant.”;
(m) after rule 8, amended as aforesaid, the following new rule 8A shall be added, namely:—
“8A. Special packing requirements for Class 8 explosives.—(1) Liquid oxygen explosives shall be packed only in insulated packing boxes of a design approved by the Director General, NEPSA.
(2) Such packing must maintain the liquid oxygen in a stable condition and prevent premature vaporization or absorption.
(3) Packages shall be clearly marked with—
(a) the words “LIQUID OXYGEN EXPLOSIVEHANDLE WITH EXTREME CARE”;
(b) the number “Class 8, Division 1”;
(c) the date of manufacture;
(d) the name of the manufacturer; and
(e) appropriate hazard warning symbols for oxidizing substances and explosives.”;
(n) in rule 11, in sub-rule (5), for the full stop, at the end, a colon shall be substituted and thereafter the following new proviso shall be inserted, namely:—
“Provided that fire proof artificial lights for handling, loading and unloading shall be installed.”;
(o) in rule 12, for the expression “or compressed gasses,”, the expression “compressed gasses, or liquid oxygen” shall be substituted;
(p) in rule 18, after sub-rule (2), the following new sub-rule shall be added, namely:—
“(3) A report of accident or theft of explosives and its accessories, shall be communicated to Director General, within twenty-four hours of incident, as per Form EM-10D.”;
(q) in rule 21, after sub-rule (3), the following new sub-rule shall be added, namely:—
“(3a) No license of explosives for import or export shall be granted without the no objection certificates from the Defence Production Division.”;
(r) for rule 29, the following shall be substituted, namely:—
“29. Import or export by land.—No license of explosives for import or export by land shall be granted without the no objection certificates from the Defence Production Division.”;
(s) in rule 30,—
(a) in sub-rule (1), for clause (iv), the following shall be substituted, namely:—
“(iv) the transport of any explosives exported under a license in Form EL-09, from the licensed premises, to the airport or port specified in the license; and
(b) after sub-rule (5), the following new sub-rules shall be added, namely:-
“(6) An escort vehicle, staffed with three armed guards, shall accompany two explosives transport vans — one carrying main explosives and the other carrying detonators. The escort vehicle shall, under no circumstances, transport any explosives or detonators, however, in case of three explosive vans the number of escort guards shall be four in number.
(7) The explosives manufacturer shall be responsible for transporting explosives from the factory premises to the license holder’s approved magazine. The manufacturer must obtain an EL-07 transport license, which may only be issued by the supplier’s district authority and strictly against the customer’s valid explosives license.”;
(r) for rule 31, the following shall be substituted, namely:-
“31. Explosives of different classes to be kept separate.—An explosive of the 5th (Fulminate) Class or an explosive of the 6th (Ammunition) Class containing its own means of ignition or an explosive of the 7th (Fireworks) Class or an explosive of the 8th (Liquid Oxygen Explosives) Class shall not be transported in the same carriage or same as provided in rule 49, in the same vessel and shall not be conveyed or handled with any explosive not of the class and division to which it belongs.
31A. Special transport restrictions for Class 8.—(1) Liquid Oxygen Explosives shall be transported only for immediate use at the destination and shall not be stored at intermediate points.
(2) Transport shall be permitted only under licence in Form EL-06.
(3) No person shall transport Class 8 explosives in passenger vessels or passenger trains.
(4) Vehicles transporting Class 8 explosives shall be equipped with temperature monitoring devices and emergency venting systems approved by the Director General, NEPSA.”
(5) The maximum net quantity of Liquid Oxygen Explosives transported in any one vehicle or transport unit shall not exceed one hundred kilograms.”;
(s) in rule 34, for clause (ii), the following shall be substituted, namely:—
"(ii) ten thousand kilograms or carrying capacity of the vehicle as per National Highways and Motorways (Dimensions of Goods Transport Vehicles) Rules, 2017, whichever is less: Provided that if any explosives intended for export outside Pakistan or from tariff area to export processing zones the quantity shall not exceed thirty thousand kilograms or maximum carrying capacity of the van, whichever is less; or”;
(t) in rule 36, in sub-rule (2), for the full stop, at the end, a colon shall be substituted and thereafter the following proviso shall be inserted, namely:—
“Provided that fire proof artificial lights for such handling, loading and unloading shall be installed.”;
(u) in rule 49, in in clause (a) of sub-rule 1, for the expression “or (fireworks) class 7 th”, the expression “(fireworks) Class 7 th or (liquid oxygen) Class 8 th” shall be substituted;
(v) in rule 80, after sub-rule (2), the following new sub-rules shall be added, namely:—
“(3) All transactions related to the purchase and sale of explosives and detonators shall be conducted strictly through formal banking channels to ensure transparency, accountability and traceability. The licensee is responsible for maintaining proper documentation and proof of all financial transactions, which shall be made available for inspection by the competent authority as and when required.
(4) The licensee shall ensure the installation and continuous operation of CCTV cameras covering all critical areas around the explosives storage manufacturing facility and magazine premises. The surveillance system shall record and retain footage for a period of ninety days and shall be accessible for inspection when required.
(5) The licensee shall provide accurate geomapping and geotagging of the explosives storage manufacturing facility and magazine premises using approved geospatial tools. The geolocation data shall be submitted to the relevant authorities and kept up to date to ensure proper monitoring, traceability, and verification of the storage location.”;
(w) in rule 84, the existing provision shall be re-numbered as sub-rule (1) of that rule and thereafter the following new subrule shall be added, namely:—
“(2) The licensee shall ensure strict compliance by maintaining and regularly updating accurate records of all transactions, movements and inventories related to explosives in the track and trace system or dashboard. These records shall be entered promptly and kept current at all times to ensure complete traceability and regulatory oversight. Failure to do so shall be considered a serious violation of safety and compliance protocols.”;
(x) in rule 85, clause (b) shall be omitted;
(y) in rule 86,—
(i) in clause (d), the word “or”, occurring at the end, shall be omitted;
(ii) in clause (e), for the full stop, at the end, a semi-colon and the word “or” shall be substituted and thereafter the following new sub-clause shall be added, namely:-
“(f) notwithstanding anything in these rules, no exemption from licence shall apply to Class 8 (Liquid Oxygen Explosives) and any quantity, however small, shall require a valid licence in Form EL-08.”;
(z) in rule 87, after sub-rule (5), the following new sub-rules shall be added, namely:—
“(6) The licensing authority shall maintain a complete record of every explosive manufactured within the country in accordance with Schedule VIII. All tests prescribed under Schedule VIII shall be conducted in the presence of the regional in-charge of the NEPSA, whose endorsement shall be duly obtained.
(7) The manufacturer shall provide and incorporate taggants, duly approved and validated by NEPSA, during the manufacturing process of explosives, under implementation model of NEPSA. These taggants, which serve as unique chemical or physical identifiers, shall assist in both pre-blast tracking and post-blast forensic analysis.”;
(aa) in rule 93, in sub-rule (2), for the figure “25”, the figure “18” shall be substituted;
(bb) after rule 94, the following new rule shall be inserted, namely:—
“94A. Mobile Manufacturing Unit (MMU).—(1) The MMU license shall be granted exclusively to—
(a) manufacturers who have both valid licenses in form EL‑01 and EL-02 under these rules;
(b) the mega mining projects and projects of national importance; and
(c) for a specific project site justifying the need for use of MMU for onsite manufacturing.
(2) Each project shall have a separate license for MMU and shall only be valid for that particular site. For new site a new license shall be obtained.
(3) Each product in MMU shall have its own fee as defined in Part II of Schedule IV.
(4) The mobile unit shall be of an approved design manufactured and tested by NEPSA.
(5) This license shall only be granted to manufacture specific permitted classes of explosives (ANFO or Emulsion or Water gel (Class 2, Div nil))
(6) To incorporate any advance technology in MMU, that involves manufacturing of any other explosives material, then it follows the procedure under rule 105.
(7) Explosives shall only be manufactured—
(a) at a specific site;
(b) within a licensed area; and
(c) for immediate use only (storage of explosives is highly prohibited).
(8) No storage of manufactured explosives is permitted unless a separate storage license is obtained.
(9) Only licensed raw materials in manufacturing process (ammonium nitrate, fuel oil) may be used.
(10) Mixing and loading shall be supervised by a competent person approved by licensing authority.
(11) The mobile unit must have—
(a) blast-proof partitions;
(b) emergency shut-off system;
(c) grounding systems to prevent static discharge; and
(d) GPS tracking.
(12) The licensee must maintain—
(a) mixing and usage logs;
(b) transport and return logs; and
(c) details of raw material consumption.”;
(z) in rule 98, sub-rule (4) shall be omitted;
(aa) in rule 99, after sub-rule (1), the following new sub-rules shall be added, namely:—
“(2) Other than operations carried out under license in Form EL-03, the use of explosives shall only be conducted through blasting companies holding a valid license in Form EL-03(A).
(3) The existing license holder in Form EL-03 as well as new entrants shall also follow the structure of blasting company as per Schedules IX and XI.”;
(bb) in rule 103,—
(a) in the marginal heading, for the expression “small arms nitro-compound” and the words “and safety fuse” shall be omitted; and
(b) in clause (f), for the expression “small arms nitrocompound,” and the words “or safety fuse” shall be omitted.
(cc) in rule 104, after sub-rule (3), the following new sub-rules shall be added, namely:—
“(4) A committee, constituted by the Director General, shall examine the feasibility for the grant of a new license for explosives operations in the proposed area. The committee shall assess all relevant parameters, including safety distances, population density, proximity to protected or sensitive locations, environmental considerations and conformity with statutory provisions. No license shall be granted unless the committee submits a written recommendation confirming the suitability of the site. All members of committee shall endorse their comments, electronically or digitally, on real time basis.
(5) The composition of committee shall be as follows, namely:—
(a) Director General (Chairman);
(b) Regional In-charge of concerned regions (Member);
(c) Representative of concerned Deputy Commissioner (Member); and
(d) Representative of Mines and Mineral Department (Member).”;
(dd) in rule 105,—
(a) in sub-rule (1),—
(i) in clause (b), for the expression “and EL-03”, the expression “, EL-03 and EL-03(A)” shall be substituted; and
(ii) in clause (d), for the word “twenty”, the words “two hundred, for the word “fifty”, the words “five hundred” and for the word “one”, the word “ten” shall respectively be substituted;
(b) in sub-rule (2), clause (ii) shall be omitted;
(c) after sub-rule (3), the following new sub-rule shall be inserted, namely:—
“(3A) In case of EL-07, the license period shall not be less than one year or upto 31st day of March, whichever is earlier. The district authority shall decide the application for grant of license within ten working days.”;
(d) for the sub-rule (12), the following shall be substituted, namely:—
“(12) The grant of a new license in Form EL-06 shall be subject to the submission of a valid no objection certificate (NOC) issued by the Ministry of Interior and Narcotics Control: Provided that the requirement of NOC shall not apply in cases where the applicant is already a holder of a valid permanent license in Form EL-02 or Form EL-03.”;
(e) for the sub-rule (13), the following shall be substituted, namely:—
“(13) For the grant of a license in Form EL-06, the vehicle shall be registered in the name of the applicant. Proof of ownership shall be submitted along with the application.”;
(f) after sub-rule (13), amended as aforesaid, the following new sub-rules shall be added, namely:—
“(14) For the grant of licenses, the applicant shall ensure the provision of the following, namely:—
(a) the following documents shall be submitted for the grant of license in Form “EL-01, EL-02, EL-03, EL-03(A) and EL-03(B), namely:—
(i) formal application with attested photocopy of CNIC briefly stating the purpose or nature of obtaining licenses and justification;
(ii) application in the prescribed Form EA-01 or EA-02 or EA-03 duly filled in and signed by the applicant;
(iii) distance Form EM-06 duly filled in against all columns thereof as per Schedule-V and signed by the applicant;
(iv) original treasury receipt for the amount payable as per Part-II of Schedule-IV showing the amount paid under the usual head of account in any branch of the National Bank of Pakistan or the State Bank of Pakistan or Government Treasury or by any authorized digital means;
(v) in case of licenses in Form EL-01 and EL-11 (MMU), an indemnity bond in form EM-08 in favor of the President of Pakistan according to the nature of the license shall be submitted;
(vi) six copies of drawings duly signed by the applicant and drawn to scale on durable paper showing full constructional details of the proposed magazine as laid down in Schedule VII, SPECIFICATION 2 (Specifications of Magazines) under these rules showing site location with full surroundings and important land marks to facilitate its location. The distances maintained around the proposed magazine shall be marked clearly;
(vii) documents showing the extent of possession or ownership of land for maintaining required safety distances from the Explosives storage magazine;
(viii) present consumption of explosives in the area and nature of work requiring use of explosives;
(ix) expected market potential in next five years from now with full justification;
(x) complete details of the present consumers of explosives in the area giving their names, complete postal addresses, nearest police station, their appropriate daily consumption of explosives and their nature of work requiring explosives;
(xi) details of other explosives magazines existing (if any) within a radius of fifty kms from the site of proposed magazine;
(xii) any proof or certificate showing competence and experience of the applicant or his authorized worker or agent or employee or supervisor in the handling of explosives;
(xiii) details of vehicle to be used for transport of explosives from source of supply to the storage magazine and the approximate distance in between;
(xiv) undertaking on judicial stamp paper by the applicant to the effect that he shall observe strictly all the requirements of these rules and submit Fortnightly explosives manufacturing or sale or use or possession reports on the prescribed Forms EM-09A, EM-09B, EM-09C, EM-09D, EM-09E, EM-10A, EM-10B, EM-10C, EM-10D, EM-10E and EM-11;
(xv) certificate to the effect that guard over the magazine shall be provided 24 hours by the licensee; and
(xvi) in case of EL-03 and EL-03(A), the requirement as stated in schedule-IX”; and
(b) in addition to the above documents, the following conditions shall also be fulfilled before grant of license, namely:—
-
NOC along-with the site or layout plan from the district authority concerned to the effect that he has no objection for the grant of license to the applicant for manufacturing or sale or use of explosives. NOC if not submitted by the applicant shall be obtained by the department from the district authority after receipt of other complete particulars from the applicant;
-
in case of license for manufacturing of explosives (EL-01), NOCs, from Ministry of Defence Production, Ministry of Interior and Narcotics Control and registration certificate of Board of Investment (in case of foreign investment) shall be obtained;
-
in case of license for sale or use of explosives (Form EL-02, Form EL-03 and EL-03A), NOC from the Ministry of Interior and Narcotics Control shall be obtained;
-
in case of blasting company, the blasting company shall obtain NOC from district authority to construct magazine at every new location, however, the clearance of the personnel of the company shall be conducted once to work anywhere in Pakistan. The grant of a license in Form EL-03(A) to any blasting company shall be subject to the prior fulfillment of all prescribed pre-qualification standards;
-
the blasting company shall be free to work anywhere in Pakistan after fulfilling all legal and codal formalities;
-
the blasting company shall buy explosives preferably from the EL-02 license holder in the region; and
-
CCTV cameras shall be installed at all manufacturing units and storage magazines and the system shall be fully integrated with the Explosives Dashboard to enable effective monitoring. The feed of CCTV cameras will only be visible to NEPSA as required. The licensee shall be liable to keep the record for the streaming not less than ninety days.
- The following documents shall be submitted for the grant of short period license in Form EL-03 for the national importance project, namely:—
- company profile;
- copy of contract agreement;
- recommendation letter from concerned government authority;
- treasury challan of grant of license according to explosives quantity;
- treasury Challan Rs. 500,000/- being refundable security fee;
- distance Form “EM-06” duly filled in and signed;
- application Form “EA-03” duly filled in and signed;
- certificate of security arrangements.
- undertaking for submission of fortnightly reports; and
- six copies of drawings duly signed by the applicant and drawn to scale on durable paper showing full constructional details of the proposed magazine as laid down in Schedule VII, SPECIFICATION 2 (Specifications of Magazines) under these rules showing site location with full surroundings and important land marks to facilitate its location. The distances maintained around the proposed magazine shall be marked clearly.
- The following documents shall be submitted for the grant of license in Form EL-11 (MMU), namely:—
- formal application;
- treasury challan as specified in Part-II of Schedule-IV;
- technical specifications and engineering drawings of the MMU;
- approval of design from NEPSA;
- test certificate issued by international 3rd party;
- ownership documents in the name of license holder in Form EL-01;
- details of safety features (pressure gauges, grounding systems and emergency shutoffs);
- site details with coordinates and safety zone maps;
- valid mining lease or contract agreement;
- details of certified Operators or drivers of MMUs;
- copy of fuel oil storage license under Petroleum Act, 1934 (XXX of 1934); and
- compliance to Schedules X(a) and X(b).”;
(ee) in rule 106,—
- in the marginal heading, for the expression “or EL-03”, the expression “EL-03, EL-03(A) or EL-03(B)” shall be substituted;
- in sub-rule (1), after the expression “EL-03”, the expression “or EL-03(A)” shall be substituted;
- in sub-rule (15), for the expression “and EL-03”, the expression “, EL-03 and EL-03(A)” shall be substituted;
- sub-rule (16) shall be omitted;
- for sub-rule (17), the following shall be substituted, namely:-
“(17) Applicants for a license to manufacture explosives under Form EL-01 shall deposit a refundable security of Rs. 1,000,000/-. Applicants seeking licenses for the sale or use of explosives under Forms EL-02, EL-03 and EL-03(B), shall deposit a refundable security of Rs. 500,000/-. Applicants for a blasting company license under Form EL-03(A) shall deposit a refundable security of Rs. 2,000,000/-. All such securities shall be deposited under the usual Head of Account as stipulated in clause (d) above.”; and
- after sub-rule (17), substituted as aforesaid, the following new sub-rules shall be added, namely:—
“(18) Upon receipt of the NOC from the Ministry of Interior and Narcotics Control and where the licensing authority is the Director General of NEPSA, the approval of the construction plan for the explosives storage magazine or factory shall be granted. The period allowed for completion of the construction work shall be one year from the date of the approved plan, which may be extended for further terms subject to valid justification.
(19) After completion of the construction work, the applicant shall apply for the grant of license to the licensing authority, submitting the application stating the completion of work along with the approved plan.”
(20) MMU licenses shall only be granted to EL-01 license holders who are Pakistani nationals.
(21) Foreign direct investment, may be invested in this sector through collaboration with Pakistani nationals. However, the license shall be issued solely in the name of Pakistani nationals and the national partner must hold a minimum fifty one percent share in the joint venture.”;
(ff) for rule 108, the following shall be substituted, namely:—
“108. Procedure to be followed for grant of license in Form EL-05 to possess and sell fireworks from shop.—(1) Notwithstanding anything contained in sub-rules (3), (4), (5), (6) and (7) of rule 106, where the licensing authority is the Director of Explosives and where the quantity of fireworks proposed to possess for sale is up to two hundred Kgs, the applicant may apply to the district authority together with an application in Form EA-02, statement in Form EM-06 and the necessary plans for the grant of a NOC for the site proposed and the district authority shall, if it sees no objection after conducting enquiries as required under these rules, grant such certificate to the applicant with site plan attested by it and may forward it to the licensing authority together with the application.”;
(gg) in rule 112,—
- in sub-rule (12),—
- in clause (iv), the word “and”, occurring at the end, shall be omitted; and
- after clause (iv), amended as aforesaid, the following new clause shall be inserted, namely:—
“(via) NOC from district authority for further renewal of term; and”; and
- after sub-rule (13), the following new sub-rules shall be added, namely:—
“(14) Fresh license, in lieu of the expired license, shall be granted only on the payment of two times the fee ordinarily payable for the license, plus fee, equal to the license fee, for each year or part thereof for which the license remained expired.”
- Existing license holders in Form EL-04, shall be valid for a period of one year from the date of making of these rules. Further extension in time shall be decided by the Grievances Committee for resolution, with the following composition, namely:—
- Secretary of the division concerned (Chairman);
- Additional Secretary of the division concerned (Member);
- Director General, NEPSA (Member);
- Director, NEPSA (Member);
- Representative of Inter-Services Intelligence (Member);
- Representative of Military Intelligence (Member);
- Representative of Intelligence Bureau (Member); and
- Representative of Ministry of Law and Justice Division, not below BS-20 (Member).”;
(hh) after rule 112, amended as aforesaid, the following new rules shall be added namely:—
“112A. Transfer of license.—(1) A license granted under these rules may be transferred by the authority empowered to grant the license subject to NOC from Ministry of Interior and Narcotics Control. The operation of license shall remain suspended till transfer.
- An applicant who desires to get the license transferred in his favour shall submit to the licensing authority the following documents, namely:—
- an application in the form relevant for grant of the license as provided in these rules;
- specimen signature of the applicant;
- a letter from the existing licensee signed by the authorized person requesting the transfer of license in favour of the applicant;
- original license issued to the existing licensee;
- copies of supporting documents regarding transfer of rights of the premises in favour of the applicant;
- treasury challan equals to the license fee;
- copies of all approved drawings in the name of the applicant; and
- status of the applicant whether individual, proprietary firm, partnership firm, company, association or otherwise-documentary evidence along with names, addresses of the proprietor or partners or directors or members, as the case may be, and photographs of the occupier.”;
“112B. Procedure for change of partners or directors or members or occupier.- Whenever any new partner or director is inducted in the partnership firm or company, as the case may be, without any change in the name of the licensee firm or company, the licensee shall submit application to the licensing authority for accepting the newly inducted partners or directors along with the following documents, namely:—
- names and addresses of newly inducted partners or directors as the case may be;
- NOC from Ministry of Interior and Narcotics Control;
- Treasury challan equals to Rs.10,000/-;
- any other document as may be called for by the licensing authority.”;
(ii) in rule 114, in sub-rule (1), for the full stop at the end, a colon shall be substituted and thereafter the following proviso shall be inserted, namely:—
“Provided that before suspending or cancelling a license, the holder of the license shall be given an opportunity of being heard.”;
(jj) in rule 115,—
- in sub-rule (2), the words and comma “or cancellation, as the case may be” shall be omitted; and
- in sub-rule (3), the word “or cancelled” shall be omitted;
(kk) in rule 118, for clause (a) of sub-rule 1, the following shall be substituted, namely:—
“(a) immediately after loss of the licence, lodge an FIR at nearest police station, publish a notice in a local daily newspaper about such loss and send copies of each to the district authority concerned and the Chief Inspector; and”;
(ll) in rule 122, after the sub-rule (2), the following new sub-rule shall be added, namely:—
“(3) The fees, as specified in Part II of Schedule IV, shall be liable to be revised from time to time by an order issued by the Secretary of the division concerned.”;
(mm) after rule 126, the following new rules shall be added, namely:—
“126A. Mandatory licensing requirement.—(1) The armed forces and Strategic Plans Division (SPD) shall obtain a license in Form EL-03B before procurement, possession, storage, transportation, transfer or use of explosives.
- No explosives shall be issued, transported, or used by any such entity unless a valid license in Form EL-03B is presented and its details are verified on the Explosives Track and Trace System (ETTS), after the expiry of 90 days transitional period as mentioned in rule 126H.
- The license shall be project-specific, unless the licensing authority, for recorded reasons, authorizes a consolidated multi-project license.
126B. Eligibility and pre-requisites for grant of license.—(1) An applicant seeking a license in Form EL-03B shall submit the following documents, namely:—
- proof of legal status, establishment order or incorporation of any entity;
- written authorization issued by the competent authority of the organization;
- details of the project, including nature, location, duration and scope of work requiring explosives;
- details of the designated explosives manager responsible for administrative compliance;
- approved storage or contracted magazine facilities licensed under these rules;
- registration on ETTS; and
- undertaking to comply with all administrative, reporting, audit and inspection requirements prescribed under the Act and these rules
126C. Integration with Explosives Track and Trace System (ETTS).—(1) Every licensee in Form EL-03B shall be mandatorily integrated with the ETTS.
- The licensee shall ensure—
- digital entry of all receipts, transfers, transportation events and consumption data;
- use of ETTS-generated movement permits for each transportation activity;
- installation and operation of ETTS-compatible devices at project sites or storage points; and
- maintenance of real-time connectivity for monitoring and verification.
- Failure to maintain accurate real-time reporting in the ETTS shall constitute a violation of the license.
126D. Obligations of license holder.—(1) A holder of a license in Form EL-03B shall—
- maintain administrative records, including digital inventory logs, personnel authorizations and project-wise usage summaries;
- report all transactions of explosives exclusively through the ETTS;
- retain administrative and digital records for a minimum period of five years;
- provide access to project sites, magazines, vehicles and digital records whenever required by the licensing authority;
- submit quarterly compliance statements to the Director General NEPSA; and
- immediately report any irregularity, discrepancy, loss or suspected diversion through the prescribed reporting channel.
126E. Validity and renewal of license.—(1) A license issued in Form EL-03B shall be valid for one year or for the duration of the project, whichever is earlier.
- Renewal of the license shall be subject to—
- compliance with ETTS reporting obligations;
- satisfactory inspection and audit findings;
- submission of updated project information for extension where required; and
- clearance of any previous penalties or outstanding violations.
126F. Audit, inspection and monitoring.—(1) The licensing authority may conduct inspections or audits at any reasonable time to verify compliance with these rules.
- Digital audits may be carried out through ETTS-generated analytics and activity logs.
- Any refusal, obstruction or delay in permitting inspection or audit shall constitute a violation of the license.
126G. Suspension, cancellation and penalties.—
- A license in Form EL-03B may be suspended or cancelled by the licensing authority for reasons including—
- furnishing false information;
- breach of ETTS reporting obligations;
- unauthorized transfer, possession or use of explosives;
- non-cooperation with audit or inspection; and
- repeated administrative violations.
- Suspension or cancellation may be accompanied by administrative penalties as provided under the Act and these rules.
126H. Transitional Provisions.—(1) Any organization previously exempted under the Act but undertaking private or contractual projects involving explosives shall obtain license Form EL-03B within ninety days of making of these rules.
- Existing stocks in their possession shall be digitally entered into the ETTS before their further use or transfer.
126I. Power to issue instructions relating to license in Form EL-03(B).—The Director General, NEPSA may issue administrative guidelines, digital reporting protocols, formats or procedures necessary for the effective implementation regarding rules 126A to 126H, provided that such instructions are consistent with the Act and these rules.”;
(mm) in rule 128,—
- in the TABLE, in column (1), in the fifth row, for the expression “Executive Magistrate or 1st Class Magistrate”, the words “Assistant Commissioner” shall be substituted; and
- in sub rule (2), for the word “telegram or fax”, the word “official available fastest means” shall be substituted;
(nn) in rule 129, in sub-rule 1(a)(i), after the expression “5th (Fulminate) class”, the expression “or the 8th (Liquid Oxygen Explosives) class” shall be inserted;
(oo) for rule 131, the following shall be substituted, namely:—
“131. Imposition of penalties.—(1) There shall be established a committee for the imposition of penalties provided under the Act which shall give its recommendations to the Director General, NESPA who shall impose penalty on such recommendations subject to the personal hearing of the accused.
- The composition of the committee shall be as under—
- Director, NEPSA (Head Office) (Chairman);
- Regional In-charge, NEPSA (Member); and
- Representative of Military Intelligence (Member).
- Where any licensee is aggrieved by any orders passed by the Director General, NESPA in terms of sub-rule (1), he may, within thirty days of such order, file an appeal to the Secretary of the division concerned whose decision shall be final.
(oo) in rule 134, in sub-rule (1), in the clause (a), for the expression “fax or express telegram on telegraphic address “Explosives” Karachi”, the words “officially available fastest means” shall be substituted;
(pp) after rule 135, the following new rule shall be inserted, namely:—
“135A. Assistance from other organizations.—(1) In performance of his functions, the Director General, NEPSA may, by an order in writing,–
- call for information from any person for the purpose of satisfying himself whether there has been any contravention of the provisions of the Act or rules made thereunder;
- require any person to produce or deliver any document or thing useful or relevant to the inquiry or investigation under the Act;
- examine any person acquainted with the facts; or
- seek expert opinion by co-opting any person in service of the Federal or Provincial Government or anybody under control of such Government.
(2) The information, expert opinion or assistance sought by the Director General, NEPSA under sub-rule (1) shall be provided by the person from whom such information, expert opinion or assistance is sought.”;
(qq) after rule 137, the following new rules shall be inserted, namely:—
“137A. Legal and regulatory enforcement.—(1) There shall be established a legal section which shall be headed by Deputy Director.
- The legal section shall be responsible for—
- providing expert counsel on the Act and the rules made thereunder;
- resolving litigation and court matters; and
- strengthening regulatory compliance through legal oversight.
137B. Technology and digital systems.—(1) There shall be established an information technology (IT) section which shall be headed by Deputy Director.
- The IT section shall be responsible for—
- developing, maintaining, and monitoring of track and trace systems for explosives;
- managing and maintaining National Explosives Database Management System (NEDMS);
- digitizing licensing processes such as applications, renewals and amendments; and
- ensuring real-time data integration for transparency.
137C. Human resource development (HRD).— (1) There shall be established an HRD section which shall be headed by Deputy Director.
- The HRD section shall be responsible for—
- training and capacity building of its officers and officials;
- arranging specialized programs on the implementation of the Act and the rules made thereunder;
- conducting certification courses for its officers and legal staff; and
- providing technical training for IT and field personnel.
137D. Research and development (R&D).—(1) There shall be established an R&D section which shall be headed by Deputy Director.
- The R&D section shall perform the following functions to drive innovation in industrial explosives safety, regulatory compliance and operational efficiency through—
- technology development to test or evaluate emerging explosive materials, storage technologies, and tracking systems and to pilot artificial intelligence or block-chain solutions for real-time monitoring;
- explosives safety and forensics to research safer formulations and handling protocols and to develop forensic tools for pre-blast and post-blast analysis;
- regulatory modernization to propose evidence-based amendments to explosives regulations and to study international standards for localized adaptation; and
- stakeholder collaboration to partner with academia or industry for joint R&D, publish technical guidelines for compliance innovation and establishment of NEDMS, which shall collaborate with the National Forensic Agency.
- NEDMS shall be a digital platform integrated, at the NEPSA, designed to serve as a unified national database for all stakeholders in the explosives sector including manufacturers, suppliers, distributors, exporters, transporters and end users. It shall enable real-time tracking and access to comprehensive records of all explosive-related transactions, covering details such as quantities, serial numbers, buyers and delivery locations. Each license holder shall be assigned a unique NEDMS ID or node, through which all relevant transactions and activities involving explosives and blasting accessories shall be recorded in the system. Additionally, NEDMS shall feature an explosives management dashboard to facilitate real-time oversight of the complete licensing regime along with progress, end-to-end track and trace, manufacturing, transportation, usage, inventory of explosives and maintaining a steady link between different ministries or departments on the subject as and when required.
137E. National Explosive Coordination Committee (NECC).—(1) The National Explosives Coordination Committee (NECC) shall operate as a specialized technical advisory. The NECC shall oversee all technical matters pertaining to the manufacture, licensing, distribution, storage, transportation and use of explosives, commercial explosives and blasting or demolition accessories.
All technical issues or disputes related to explosives shall be reviewed and approved by the NECC prior to implementation.
- The policy and regulation of NECC is to Formulate and issue technical directives, safety guidelines and operational policies for explosives management and to develop, revise and enforce safety and security regulations, including Standing Operating Procedures (SOPs), handling protocols and storage guidelines.
- The advisory and decision-making shall be served as the primary technical advisory body on explosives-related matters and to approve and guide R&D initiatives to integrate emerging technologies and global best practices.
- The composition of NECC, is as under—
- Additional Secretary of the division concerned (Chairman);
- Director General of NEPSA (Member);
- Deputy Director (Legal) NEPSA (Member);
- Scientific Officer (R&D) NEPSA (Member);
- Representative of Inter-Services Intelligence (Member);
- Representative of Military Intelligence (Member);
- Representative of Intelligence Bureau (Member); and
- Representative of Ministry of Law and Justice Division, not below BS-20 (Member).
137F. Provincial Explosives Committee (PEC).—
- Each province shall have a Provincial Explosives Committee (PEC), including Azad Jammu and Kashmir and Gilgil-Baltistan. These committees shall ensure the implementation of national policy and shall also provide input on any future changes required to cater to specific provincial needs. They will support and monitor the District Explosives Management Committee (DEMC) to ensure proper and timely implementation. Moreover, they will provide facilitation to the licensees, effective monitoring of explosives usage and enforcement of the Act and these rules.
- The Committee shall comprise of multi-agency stakeholders to ensure comprehensive oversight while maintaining clear hierarchical accountability. The Committee shall include the following members, namely:—
- Provincial in-charge, of NEPSA (Chairperson);
- A representative from Home Department (not less than BS-18) (Member);
- A representative from IG Office (not less than BS-18) (Member);
- Nominated official from the Mines and Minerals Department (Member);
- A member from Military Intelligence (Member); and
- A member from ISI (Member).
- The Chairman may co-opted any person at any time who is conversant with the pending issue for obtaining his expertise in that matter.
137G. Establishment of District Explosives Monitoring Committee (DEMC).—(1) The DEMC shall serve as the primary regulatory body for explosives oversight at the district level, with the responsibilities to—
- monitor end-user explosive utilization and compliance,
- infer the feasibility for new licenses;
- conduct verifications and issue NOCs for grant of license;
- ensure security clearance of personnel supervising explosive operations; and
- comply with all explosive-related activities including blasting, storage, transportation and usage by authorized blasting companies and shot-firers.
- The composition of the DEMC shall be as under—
- Co-opted member(Member).
- Mines and Minerals Department official (Member); and
- Military or Frontier Constabulary or Civil Armed Forces representative (Member);
- Representative of Intelligence Bureau (Member);
- Representative of Military Intelligence (Member);
- Representative of Inter-Services Intelligence (Member);
- Officer of NEPSA (Member);
- Police representative, Deputy Superintendent rank or above (Member);
- Assistant Commissioner of the relevant sub-division (Member);
- Additional Deputy Commissioner of the respective district (Secretary);
- Deputy Commissioner of the respective district (Chairperson);
- The Chairman may co-opted any person at any time who is conversant with the pending issue for obtaining his expertise in that matter (Member).”;
(rr) for Schedule-I, the following shall be substituted, namely:
“CLASSIFICATION OF EXPLOSIVES
(See rule 3)
|
Class No. |
Name |
Definition |
Sub-Division |
|
1 |
Gun powder |
“Gunpowder” means gunpowder ordinarily so called. |
Nil |
|
2 |
Nitrate-mixture |
“Nitrate-mixture” means any preparation, other than gunpowder which is formed by the mechanical mixture of a nitrate with any form of carbon or with any carbonaceous substance not possessed of explosives properties, whether sulphur be or be not added to such preparation, and whether such preparation be or be not mechanically mixed with any other non-explosive substance, and includes any explosive containing a perchlorate and not being a chlorate-mixture, fulminate or nitro-compound as defined in this Schedule |
Nil |
|
3 |
Nitro-compound |
“Nitro-compound” means any chemical compound which is possessed of explosive properties or is capable of combining with metals to form an explosive compound, and is produced by the chemical action of nitric acid (whether mixed or not, with sulphuric acid), or of a nitrate mixed with sulphuric acid, upon any carbonaceous substance, whether such compound is mechanically mixed with other substances or not. |
Division 1, comprising any chemical compound or mechanically mixed preparation which consists, either wholly or partly, of nitro-glycerine or some other liquids nitro-compound that is such explosives as ballistite, blasting gelatine, cordite, dynamite, gelatine dynamite, gelignite, etc. Division 2 comprising any nitro-compound, which is not comprised in Division 1 that is explosives such as ammonal, E.C. sporting powder, gun-cotton, picric acid, smokeless diamond, trinitro-toluol. (T.N.T.)_ etc. |
| 4 | Chlorate-mixture | “Chlorate-mixture” means any explosive containing a chlorate. | Division 1, comprising any chlorate preparation which consists partly of nitro-glycerine or of some other liquid nitro-compound. Division 2, comprising any chlorate mixture which is not comprised in Division 1. |
| 5 |
Fulminate |
“Fulminate” means any chemical compound or mechanical mixture whatever, which from its great susceptibility to detonation, is suitable for employment in percussion-caps or any other appliances for developing detonation, or which, from its extreme sensibility to explosion, and from its great instability (that is to say, readiness to undergo decomposition from very slight exciting causes), is specially dangerous. |
Division 1 comprising such compounds as the Fulminate of sliver and of mercury, and preparations of those substances such as are used in percussion caps, and any preparation consisting of a mixture of chlorate with phosphorus, or certain descriptions of compounds of phosphorous, with or without the addition of carbonaceous matter, and any preparation consisting of a mixture of a chlorate with sulphur or with sulphuret, with or without carbonaceous matter. Division 2 comprises such substances as the chloride and the Iodide of Nitrogen, Fulminating Gold and Silver, Diazobenzol and the Nitrate of Diazobenzol. |
| 6 | Ammunition | “Ammunition” means an explosive of any of the foregoing classes when the same is enclosed in any case or contrivance, or is otherwise adapted or prepared so as to form: (a) a cartridge or charge for small arms, cannon or any other weapon, or (b) a safety or other fuse for blasting or for shells, or (c) a tube for firing explosive, or (d) a percussion cap, detonator, fog signal, shell, torpedo, war rocket or any other contrivance other than a firework. |
Division 1 comprises exclusively of, safety cartridges, safety fuses for blasting, railways fog signal and percussion caps. Division 2 comprises any ammunition which does not contain its own means of ignition and is not included in Division 1, such as cartridges for small arms other than safety cartridge, cartridges and charges for cannon shells and torpedoes containing any explosives, tubes for firing explosives, and war rocket, which do not contain their own means of ignition. Division 3 comprises any ammunition which contains its own means of ignition and is not included in Division 1, such as detonators, fuses for blasting which are not safety fuses, tubes for firing explosives, containing their own means of ignition. Note: The expression “ammunition containing its own means of ignition” means ammunition having an arrangement, whether attached to or forming part of the ammunition which is adapted to explode or fire the ammunition by friction or percussion “percussion cap” does not include a detonator. |
| 7 | Fireworks |
Division 1 comprises fireworks composition that is to say, any chemical compound or mechanically mixed preparation of an explosive or inflammable nature, which is used for the purpose of making manufactured firework, and is not an explosive of classes 1,2,3,4,5 and 6, any star and any colored fire composition: Division 2 fireworks comprises manufactured fireworks i.e. to say any explosive of class 1,2,3,4 or 6 and any fireworks composition when such explosive or composition is enclosed in any case or contrivance or other articles specially adapted, for the production of pyrotechnic effect for pyrotechnic signal or sound signals, Division 2 fireworks comprises 3 sub-divisions, namely, Sub-division 1, Sub-division 2 and Sub-division 3. Sub-division 1 of Division 2 fireworks comprises low hazard fireworks which, in the opinion of Director General of Explosives are relatively innocuous in themselves and are not liable to explode violently or all at once e.g. sparklers [Chinese crackers, serpents, etc.] Sub-division 2 of Division 2 of fireworks comprises high hazard fireworks which, in the opinion of Director General of Explosives, present a special hazard to a person e.g. rockets, shells, maroons, wheels, barrages, fountains, illumination pieces, distress signals, pyrotechnic devices etc. Sub-division 3 of Division 2 fireworks comprises such fireworks, which are assembled at site purely for the purpose of display. Division 3 comprises any explosive contrivance required for the manufacture of manufactured fireworks e.g. quick match fuse, micro cord fuse etc.: provided that a substantially constructed hermetically closed metal case, containing not more than 500 gms of coloured fire composition of such a nature, as not to be liable to spontaneous ignition shall be deemed to be “a manufactured firework” and not a “firework composition”. |
|
| 8 |
Liquid oxygen Explosives Class |
"Liquid Oxygen Explosives" means an absorbent carbonaceous material such as wood pulp, carbon black, metal powder, coal dust, etc. impregnated with liquid air or liquid oxygen with or without the addition of other substances. | Nil", |
(tt) in Schedule II, in the Table, after item no. 20, following shall be added, namely:—
| Item No. | Class | Method of Packing | Quantity in any one outer package | Quantity in any one inner package |
| (1) | (2) | (3) | (4) | (5) |
| 21 | Class 8, Liquid Oxygen Explosives | Cartridges packed and transported for immediate use in insulated packing boxes of a desing approved by the Director General NESPA"; | Upto 5Kgs net explosive (single cryogenic container) | Upto 25 Kgs net explosvie (maximum 5 inner packages", |
(uu) for Schedule IV, the following shall be substituted, namely:—
“SCHEDULE IV
(See rule 105)
PART 1
LICENSES AND LICENCING AUTHORITY
|
Article No. |
Form of license |
Purpose for which license granted |
Authority empowered to grant the license |
|
(1) |
(2) |
(3) |
(4) |
|
1 |
EL-01 |
(a) To manufacture explosives other than fireworks, gunpowder. |
Director General |
|
(b) To manufacture fireworks and or gunpowder up to 200 kgs. |
Director/Deputy Director authorized by Director General. |
||
|
(c) To manufacture fireworks and or gunpowder more than 200 Kgs at a time. |
Director General |
||
| (d) To manufacture Liquid Oxygen Explosives | Director General | ||
| 2 | EL-02 | (a) To possess for sale explosives not exceeding 2000 Kgs of Class 1,2,3,4 and 7 together with explosives of class 6. | Director/Deputy Director authorized by Director General |
|
(b) To possess for sale explosives exceeding 2000 kgs. of class 1,2,3,4 and 7 and any quantity of class 5, 6, and 8 |
Director General | ||
| 3 | EL-03 | (a) To possess for use explosives not exceeding 2000 kgs. of class 1,2,3,4 and 7 together with explosives of class 6. | Director/Deputy Director authorized by Director General |
|
(b) To possess for use explosive exceeding 2000 kgs of class 1,2,3,4 and 7 and any quantity of class 5, 6 and 8. |
Director General | ||
| 4 | EL-03(A) | To possess for use any class and quantity of industrial explosives by blasting company. | Director General |
| 5 | EL-03 (B) | To possess for use any class and quantity of industrial explosives by Special Organization | Director General |
| 6 | EL-05 | a. To possess and sell fireworks from a shop fireworks | Director/Deputy Director authorized by Director General |
| 7 | EL-06 | Grant of license for road van. | Director/Deputy Director authorized by Director General |
| 8 | EL-07 | To transport explosives. | District Authority |
| 9 | EL-08 | To import explosives. | Director General |
| 10 | EL-09 | To export explosives. | Director General |
| 11 | EL-10 | For public display of fireworks. | Director/Deputy Director authorized by Director General |
| 12 | EL-11 | License to use Mobile Manufacturing Unit (MMU) | Director General |
| 13 | EL-12 | To transport explosives in boat | Convener of port |
PART II
FEE CHART
|
Rs. 50,000 for each division of explosives
Rs. 50,000
Rs.50000
Rs. 10000 Rs. 50000 for first 15 days and 30000 for every additional 15 days or part thereof Rs. 10000 Rs. 10000 Rs. 5000 Fee equal to grant of license fee Rs. 5000 |
- in Schedule V, —
- in Form EA-03, in paragraph 4, in the table, in the first column, after last entry and the corresponding entry relating thereto in the second column, the following new entry and the corresponding entry relating thereto shall be added, namely:—
| “ Blasting Company”; | |
- Form EA-04 shall be omitted.
- in Form EA-07, in paragraph 3, in the table, in the first column, after last entry and the corresponding entry relating thereto in the second column, the following new entry and the corresponding entry relating thereto shall be added, namely:-
| “ By land”; | |
- in Form EA-08, in paragraph 5, in the table, in the first column, after last entry and the corresponding entry relating thereto in the second column, the following new entry and the corresponding entry relating thereto shall be added, namely:-
| “ By land”; | |
- in Form EL-01, —
- the words “per year”, occurring twice, shall be substituted; and
- after condition 26, a new condition shall be added as follows:
“(27) Manufacturers may add additional rooms in their storage magazine attached with manufacturing facility:
provided that—
- the maximum capacity of each room shall not exceed twenty tons;
- all the new rooms shall be mounded with a distance of twenty feet from one another.; and
- the total quantity remains within the maximum permissible limit of fifty tons under these rules.”;for
- form EL-04, the following shall be substituted, namely:—
“ FORM EL-03(A)
(See rule 105)
[Article 4 of Part 1of Schedule IV]
License to possess Explosives for use by blasting company
No……………………….. Annual fee………………………..
Rs……….
License is hereby granted to………….valid only for possession and use of quantities of explosives specified in Table 1, at the premises described in Table 2, subject to the provisions of Explosives Act, 1884, the rules made thereunder and to the conditions of this license.
This license shall remain valid till the 31st day of March, 20………………….
This license is liable to be suspended or revoked for any violation of the Act or rules made thereunder or the conditions of this license or if the licensed premises are not found conforming to the description shown in attached plan.
Table 1
Kind and quantity of explosives permitted to possess and use:—
|
S. No. |
Name |
Class |
Division, if any |
Quantity |
A/U |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Table 2
|
Approval No. of plans showing the licensed premises. |
Situation of the premises. |
Details of approved facilities at the premises. |
||||
|
S. No |
Approval No. |
Date |
Place |
Police station |
District |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||
|
|
|
|
|
|||
Postal Address of licensee…………………………………….
The........................... 20….
(Licencing Authority)
Endorsement for renewal of license:—
|
Date of renewal. |
Date of expiry. |
Signature of licensing authority. |
|
|
|
|
CONDITIONS
- The quantity of explosives on the premises at any one time shall not exceed the licensed capacity.
- The blasting company will have prior approval form National Explosives and Petroleum Safety Agency, of a magazine in every district where it desires to perform the activity.
- The magazine or store house shall be used only for keeping all explosives specified in Table 1 of this license and of receptacles, or tools or implements for work connected with the keeping of such explosives.
- The opening of packages and the weighting and packing of explosives shall not be carried on in the magazine or store house.
- Two or more description of explosives which may be permitted to be kept in the magazine or store house in Table 1 shall be kept only if they are separated from each other by an intervening partition of such substance, character, or by such intervening space, as will effectually prevent explosion or fire in the one communicating with the other:
Provided that—
- the various explosives of classes 1 (gunpowder), 2 (nitrate-mixture), 3 (nitro-compound) and 4 (chlorate mixture), safety fuses belonging to the1st Division of the 6th (Ammunition) Class, and such of the various explosives of the 2nd Division of the 6th (Ammunition) Class as do not contain any exposed iron or steel, may be kept with each other without any intervening partition or space;
- the various explosives of the 1st division of the 6th (Ammunition) class may be kept with each other without any intervening partition or space;
- such of the various explosives of the 2nd Division of the 6th (Ammunition) Class as contain any exposed iron or steel, may be kept with each other without any intervening partition or space;
- the various explosives of the 3rd Division of the 6th (Ammunition) Class may be kept with each other without any intervening partition or space; and
- the various explosives of the 7th (Fireworks), Class other than those containing chlorate may be kept with each other without any intervening partition or space.
- Save as aforesaid, two or more descriptions of explosives shall not be kept in the magazine or store house notwithstanding the provisions of additional condition No…
- (a) Explosives of the 3rd (nitro compound) Class shall not be kept in the magazine after the expiration of one year from the date of their manufacture except with the special sanction of an Inspector of Explosives; and
(b) when such sanction has been given, a written certificate showing the period covered by the sanction must be obtained from an Inspector of Explosives at each inspection, and must be kept by the licensee and produced on demand.
- When an explosive owing to its being no longer of standard purity or owing to signs of liquefaction or of exuded nitro-glycerine or liquid nitro-glycerine or liquid nitro-compound is no longer fit for storage in the magazine or store house the licensee shall comply, at his own expense, with such directions as to its disposal as the Director General, Director, or Deputy Director of NEPSA may issue.
- The interior of the magazine or store house and the benches, shelves and fittings therein shall be so constructed or so lined or covered as to prevent the exposure of any iron or steel contact with the explosives. Such interior, benches, shelves and fittings shall so far as is reasonably practicable, be kept free from grit and otherwise clean; and in the case of any explosives liable to be dangerously affected by water, due precautions shall be taken to exclude water therefrom:
Provided that so much of this condition as relates to precautions against the exposure of any iron or steel shall not be obligatory in a building in which no explosive other than explosive of the 1st Division 6th (Ammunition) Class is kept.
- If the lighting conductor is tested by an Deputy Director Explosives, the licensee shall pay the fees prescribed for test. In the event of the test proving unsatisfactory, another fee shall be payable by the licensee for each subsequent test until the lighting conductor is passed by the testing officer as satisfactory:
Provided that the fees payable for a single test shall be charged for all tests made on a conductor during any one day.
- Due provisions shall be made, by the use of suitable working clothes without pockets, suitable shoes and by searching or otherwise or by such means, for preventing the introduction into danger area of the factory premises of fire, lucifer matches or any substance or article likely to cause explosion or fire, but this condition shall not prevent the introduction of an artificial light of such construction, position or character as not to cause any danger of fire or explosion:
Provided that so much of this condition as applies to the exclusion of iron or steel, shall not be obligatory in a building in which no explosive other than an explosive of the 1st Division of the 6th (Ammunition) Class is kept.
- The licensee shall keep records and accounts of all explosives manufactured and of all stocks in hand in forms EM-09A and EM-09E and exhibit the stock books and records to any of the officers authorized under rule 128 whenever such officer may call upon him to do so.
- Any accident and losses, shortage, of stock and thefts of explosives shall be reported without delay to the nearest police station and the licensing authority.
- Free access to the licensed premises shall be given at all times to any inspecting or sampling officer and all facilities shall be offered to the officer for ascertaining that the provisions of the Act and rules made thereunder and the conditions of this license are duly observed.
- No changes or alterations shall be carried out to the premises without prior approval of the licensing authority and the licensee shall comply with any condition that may be specified by the licensing authority in this behalf.
- If the licensing authority calls upon the holder of the license by a notice in writing to take any action which may in the opinion of such authority be necessary for the safety of the premises or the public, the holder of license shall take such action within such period, not being less than fifteen days from the date of receipt of the notice, as may be fixed by the notice.
- Magazine or store house shall at all times be in good condition. The licensee shall report to licensing authority forthwith, if the magazine or store house comes unfit for storage of any explosives for any reason whatsoever.
- The licensee shall submit at the end of every fortnight a return in Form EM-10(A) to EM-10(E) to the licensing authority as well as the renewal authority in the proforma prescribed from time to time so as to reach the above authorities by the 5th day of the end of each fortnight.
- Any encroachment of the safety distance shall be immediately communicated to the licensing authority for necessary advice and action.
- The licensing authority shall be immediately informed for advice if any explosive is found deteriorated or unserviceable.
- The explosive packages shall be stacked in such a way so as to allow movement of at least one person to check the condition of all packages stored and to read the manufacturer’s particulars of each package.
- The resistance of the lightning conductor to earth shall be as low as possible and in no case more than ten ohms.
- A distance of fifteen metres surrounding the magazine or store house shall be kept clear of dried grass or bush or flammable materials.
- Every packet of explosive at the time of bringing inside the magazine or store house shall be examined for its sound condition.
- Not more than three persons shall be allowed inside the magazine or store house at any one time.
- Empty packages of the explosives shall be removed at the earliest and destroyed.
- The explosives shall not be used for blasting purposes in the areas not coming within the purview of the Mines Act, 1923 (IV of 1923), unless the licensee employs a qualified shot firer or the person having equivalent qualifications as recognized by the Director General NEPSA.
- The licensee and the short firer shall be responsible for preparation of charges, the charging of holes and the firing of shots and shall take all precautions against fire and accident involving the explosives.
- No smoking or any source of light or fire shall be allowed in or near the place where explosives charges are being prepared or kept.
- For charging or stemming a shot hole, no person shall use an iron or steel tools, scraper, or tamping rod, nor shall forcibly press the explosive into a hole of insufficient size. A tamping rod made entirely of wood shall be used.
- Before exploding any blasting charge, adequate measures shall be taken so as to prevent as far as possible, the projection of fragments of stone by the explosion of the blasting charge.
- No person shall re-bore or temper a hole that has once been charged or attempt to withdraw a charge either before firing or after a misfire or deepen or tamper with empty holes or sockets left after blasting.
- Before commencing shot firing the license shall give sufficient warning to the public by an efficient system of signals and by putting up red flags in the danger zone. He shall see that all persons in the vicinity have taken proper shelter and shall also take suitable steps to prevent any person approaching the shot.
- The licensee shall warn the public not to approach the site of blasting operation at least within an hour after explosion or in the case of an open quarry, not to approach such quarry within half an hour after explosion.
- The number of shots which explode shall be counted and unless it is certain that all the shots have exploded no person shall approach or be permitted to approach the place until 30 minutes after the firing of shots.
- In the event of a misfire, if relieving hole is to be drilled it shall not be placed within 30 cm. from the misfired hole. The relieving hole shall run parallel to the misfired hole.
- The licensee shall procure explosives preferably from EL-02 license holders, of nearby regions.
- The licensee shall be permitted to enter into joint ventures with existing EL-02 license holders.
Additional Conditions.
…………………………………………………………………………………………………………”
FORM EL-03(B)
(See Rule 138-B)
[Article 5 of Part 1of Schedule IV]
License to possess Explosives for use by State-Owned-Entities (SOEs)
- Name of Licensee Organization:…………………………………………………………………………
- Legal Status (tick one):
- Statutory Authority
- State-Owned Enterprise
- Autonomous Body
- Public Agency undertaking private/commercial work
- Other (specify): ………………………………
- Registered Address of the Organization:…………………………………………………………………………
- Contact Person / Designated Explosives Manager:
Name: ………………………………………
Designation: ………………………………
CNIC/Official ID No.: ………………………
Phone: ………………………………………
Email: ……………………………………….
- Project for which License is Required:
- Project Title: …………………………………………………
- Project Location(s): ……………………………………………
- Nature of Work:
- Construction
- Mining / Quarrying
- Demolition
- Engineering Works
- Other (specify): ……………………………
- Project Duration: From ………… to ……………
|
6. Storage Arrangements: |
|
|
|
a. On-site Licensed Magazine : |
□ Yes |
□ No |
|
b. Contracted Licensed Magazine: |
□ Yes |
□ No |
|
If yes, provide details: |
|
|
License No.: …………………………………… Location: …………………………………………
- Intended Source(s) of Explosives:
(Provide details of licensed manufacturers/importers/suppliers)
……………………………………………………………………………
- Explosives Track & Trace System (ETTS) Registration: Date of Activation: ……………………………………
- Estimated Quantity Required (Any one time):
……………………………………………………………………………
- Details of Transportation Arrangements (if applicable): Licensed transporter(s) and vehicle identification numbers:
……………………………………………………………………………
- Declaration by the Applicant Organization:
We hereby declare that—
- The explosives requested under this license shall be used solely for the project identified above;
- All administrative and reporting obligations under the Explosives Act, 1884 and the Explosives Rules, 2010 shall be complied with;
- All explosive transactions shall be reported in real time through the Explosives Track & Trace System;
- All information provided herein is true and correct to the best of our knowledge.
Authorized Signatory
Name: ……………………………………………..
Designation: ………………………………………
Signature: ……………………
Date: …………….
(Official Stamp of Organization)
FOR OFFICIAL USE
- Inspection Report:
Documents verified
Magazine arrangements verified
ETTS activation confirmed
Remarks:
……………………………………………………………………………
Inspecting Officer (Name & Designation):
Signature: …………………… Date: ……………
- Order of the Licensing Authority
License No.: …………………………… Valid From: …………… To: ……………
Project-Specific License (Yes/No): ……………
The applicant is hereby granted a license in Form EL-03B for possession, transportation and use of explosives for the above-mentioned private/commercial project, subject to compliance with the Act, Rules, and conditions endorsed.
Director General /Authorised Officer
Name: ……………………………………………
Signature: …………………… Date: ……………
(Official Seal)
- in Form EL-05, for the expression “(a) small-arms nitro-compound not exceeding twenty five Kgs or fire-works not exceeding two hundred kgs or gunpowder not exceeding twenty five kgs and safety fuse not exceeding ten thousand meters or (b) fire-works not exceeding hundred kgs or gunpowder not exceeding fifteen kgs and safety fuse not exceeding five thousand meters”, the expression “a) License to possess and sell fireworks from a shop not exceeding two hundred kgs or (b) fireworks not exceeding fifty Kgs” shall be substituted;
- in Form EL-08, the word “otherwise than by land” shall be omitted;
- in Form EL-09,-
- the word “otherwise than by land” shall be omitted; and
- after Condition (6), the following new clause shall be added, anmely:-
“(7) In case of export of explosives by sea or by land explosives can be transported from the factory premises to the designated port/ border in the specialized containers approved by NEPSA for the export to the concerned country.”;
- Form EL-11 shall be substituted, namely: -
“Form EL-11
(See rule 105)
[Article 11 of Part 1 of Schedule IV]
License to use Mobile Manufacturing Unit (MMU)
No……………………………………. Annual Fee Rs…………..
License is hereby granted to…………………………………only for manufacture of ……………. (class 2, Div nil) at any one time at the premises described in Table 1 below subject to the provisions of Explosives Act, 1884, and the rules made thereunder and the conditions of this license.
This license shall remain valid till the 31st day of March, 20………….
This license is liable to be suspended or revoked for any violation of the Act or rules made thereunder or conditions of the license if the licensed premises are not found conforming to the description as per attached plans.
|
Location of site. |
District. |
Approved facilities. |
Approval No. and date of plan attached with the license. |
|
|
|
|
|
Table 1
DESCRIPTION OF THE LICENSED PREMISES:-
Postal address of the licensee……………………………………… The………………………. (Licencing Authority) Space for endorsement of renewals: -
|
Date of renewal. |
Date of expiry. |
Signature of licensing authority. |
|
|
|
|
CONDITONS
- Mixing of ANFO/Emulsion/Water Gel (Class 2, Division Nil), must only occur:
- Inside the MMU’s designated champers, immediately before charging holes.
- In accordance with a blasting plan approved by a licensed shot-firer or explosives engineer.
- No pre-mixed ANFO/Emulsion/Water Gel (Class 2, Div nil.) is allowed to be transported.
- MMU must not park overnight at unauthorized locations with raw materials or mixed explosives on board.
- The unit must be equipped with:
- Fire extinguishers
- Spill containment kits
- PPE for all operators
- All operators must:
- Be trained and certified in explosives handling.
- Hold valid security clearances.
- Be competent in emergency response procedures.
- At least one licensed blaster must be present during mixing and charging operations.
- Raw materials for ANFO/ Emulsion/Water Gel (class 2, Div nil), may only be loaded into the MMU:
- At licensed explosive or raw material storage facilities.
- Under the supervision of authorized personnel.
- The MMU must be locked and secured when unattended.
- Complete Supply Chain of ingredients used in MMU shall be maintained by the licensee for at-least 3 years.
- Movement logs, GPS data, and usage logs must be maintained and made available for inspection.
- Unauthorized access or diversion of explosives or raw materials must be reported immediately.
- The licensee shall maintain a detailed record of all personnel engaged in each activity of onsite manufacturing on every MMU. Such record shall be produced for examination by the authorized officer of NEPSA during inspection.
- Spills of ANFO/Emulsion/Water Gel, (Class 2, Div nil)) must be cleaned as per environmental regulations.
- Waste must be collected and disposed of through authorized channels.
- Wash-down of MMU is only permitted at approved locations with waste treatment facilities.
- The following records must be maintained for at least 3 years:
- Daily log of production
- Material inventory
- Maintenance and calibration records Blasting reports
- MMU license will only be granted to the (existing EL-01 license holder) for mega mining/ projects of national interests.
- Every MMU will have its individual license granted with specification of the unit.
- Use of Hexamethylenetetramine, or its derivatives, in MMU is strictly prohibited.
- The license holder will enter his data on real time basis within approved limit in online explosives portal.”;
(ww)in Schedule VI, in the Table; -
- in column (2), after the word “magazine.”, the comma and words “, and guard room” shall be added;
- in column (3), for the words “dam etc”, the expression “, dam, Electric power overhead (upto 440V) etc” shall be substituted;
- in column (4), for the words “chimney etc” the expression “, chimney, Electric power overhead (above 440V) etc” shall be substituted;
Following conditions shall be put in under Schedule VI of the safety distances
(i) in case of EL-02 magazine if the capacity is more than 50 M.Tons distance calculation will be done as per proportion available in the distance table of schedule VI;
- In Schedule VII, after specification 3, new specification 4, shall be added;
SPECIFICATION 4
SPECIAL SAFETY REQUIREMENTS FOR CLASS 8
(LIQUID OXYGEN EXPLOSIVES)”
- Manufacturing premises shall be located at least 500 meters from inhabited areas.
- The maximum net quantity of Class 8 liquid oxygen explosives stored in any one magazine shall not exceed five hundred kilograms (500 kg) in not more than twenty outer packages.
- Storage temperature shall not exceed -183°C (boiling point of oxygen).
- Personal protective equipment including cryogenic gloves and face shields mandatory for handling.
- No organic materials or flammable substances within 50 meters.
- Immediate evacuation protocol in case of vaporization or spillage.
- No smoking, open flames, or spark-producing equipment within 100 meters.
- Notwithstanding any other provision, Class 8 explosives shall not be used in any mine.
- after Schedule VIII, the following new Schedule shall be added, namely:-
“SCHEDULE IX
[See rule 99(3)]
Requirement of Blasting Companies
- Any firm desirous of including to be Blasting Company, shall apply to the Director General of Explosives.
- The blasting company shall include the below mentioned personals, having relevant experience in the field.
- GM Operational and Safety Department (Experience of 5 years in dealing Explosives)
- Operational and Safety Chief Engineer (4 years degree in Related field+3 years’ Experience)
- Supervisor (Diploma/certificate in related field + 3 years’ Experience)
- Short Firer (Short Term Diploma/certificate in the related field)
- G.M. Supply Chain Department (Experience of 5 years in dealing Explosives)
- Business and Accounting Manager (4 years degree in Related field+1 years’ Experience)
- Manager Logistics (Diploma/certificate in related field + 1 years’ Experience)
- Manager Transport and supply chain (Diploma/certificate in related field + 1 years’ Experience)
- Explosives Magazine and storage (Diploma/certificate in related field + 1 years’ Experience.
Schedule X
Licensing for Mobile Manufacturing Units Licensing Procedure
- Application shall be submitted to the Director General NEPSA with:
- Technical drawings
- Design certification
- SOPs & safety manuals
- Operator qualifications
- Vehicle registration
- A field inspection shall be conducted prior to issuing a license.
- Keeping the safety parameters in view, the applicant will be responsible for the commute to inspect the premises before grant of license.
- License validity shall be one year or the completion of the project whichever is earlier, renewable subject to compliance.
- Each MMU will have a new license for every product
Documents Required
Applicants must submit:
- Engineering drawings (mechanical, electrical, hydraulic)
- Fire suppression certification
- Pressure vessel certificates (if installed)
- SOP for:
- Mixing
- Loading
- Shutdown
- Emergency operations
- Hazard Identification & Risk Assessment (HIRA)
- Emergency Response Plan
- Operator training certificates
- Vehicle fitness certificate
- Insurance of MMU & personnel
- Letter of intent from blasting site operator (if applicable)
Technical Compliance Standards
Every MMU shall comply with:
- AS 2187.2 (Australia) – Explosives Use & Mobile Mixing Units
- IME SLP-2, SLP-13, SLP-22 – Safe Operation of MMUs
- ADR 2023 Transport of Dangerous Goods (as adapted)
- ISO 9001 (quality), ISO 45001 (safety)
- SAFEX guidelines for AN-based explosive transportation
MMU Design Requirements
Every MMU submitted for approval shall meet the following criteria:
Structural & Mechanical Design
- The MMU shall be constructed of non-sparking materials.
- Compartments shall be segregated for:
- AN prill
- Fuel oil
- Additives
- Emulsion matrix
- Vehicle chassis shall be rated for the load as per manufacturer specifications.
- All rotating parts shall be shielded to prevent mechanical ignition.
- A double-insulated fuel system shall be mandatory.
Electrical System
- All electrical systems shall be intrinsically safe or ATEX-certified.
- Electrical wiring shall be protected from heat and abrasion.
- Static discharge controls (grounding & bonding) shall be installed at all transfer points.
Fire Protection
- Automatic fire suppression systems shall be installed over:
- Engine compartment
- Mixing chamber
- Fuel storage area
- At least two 9-kg dry chemical extinguishers shall be provided.
Mixing System Requirements
Continuous Mixing
- MMUs shall be designed for continuous-mix only; storage of finished explosive on-board is strictly prohibited.
Interlock & Control Systems
- The MMU shall include:
- Pressure monitoring
- Temperature monitoring
- Flow indicators
- Emergency stop switches
- Interlocks shall automatically halt operations if:
- Fuel or matrix flow exceeds set limits
- Pressure exceeds safe levels
- Static grounding is interrupted
- A fire or electrical fault is detected
Metering & Calibration
- The metering system for AN prill, fuel, and emulsion shall be calibrated annually.
- Processing equipment shall maintain mixture ratios within ±1% accuracy.
Operational Restrictions
- No MMU shall carry detonators or boosters simultaneously with AN, fuel, or matrix.
- MMUs shall not operate:
- Near public roads (<50 m)
- Near electrical transmission lines (<30 m)
- In residential or congested areas
- On-site manufacturing shall be conducted only under supervision of a Blasting Engineer.
- Operating in thunderstorms or extreme heat (>45°C) shall be prohibited unless adequate cooling systems exist.
COMPLIANCE FRAMEWORK FOR MOBILE MANUFACTURING UNITS (MMUs)
(For On-Site Production of ANFO & Emulsion Explosives)
- General Compliance Requirements
- MMU must be approved by the Director General NEPSA prior to operation.
- All MMUs must comply with:
Explosives Act, 1884
Explosives Rules, 2010
- Operations shall only be performed by certified MMU Operators and supervised by a Shotfirer/Blasting Engineer.
- MMU must carry only materials required for same-day blasting.
- Design Compliance
- 1 Structural Requirements
- Separate and clearly labeled compartments for:
- Hazard-resilient construction: non-sparking materials, enclosed compartments.
- Chassis load certification appropriate for explosives equipment.
- 1 Structural Requirements
AN prill
- Emulsion matrix
- Fuel oil
- Additives
- No cross-contamination between compartments.
- Weatherproof and dustproof construction
- 2 Electrical System
- ATEX-certified or intrinsically safe equipment.
- Wiring shielded from abrasion and heat.
- Static control:
- Grounding points
- Bonding straps
- Anti-static flooring
- 3 Fire Safety
- Automatic fire suppression system (engine + mixing compartment).
- 2 x 9 kg dry chemical extinguishers.
- No ignition sources within hazardous zones.
- Mixing System Compliance
- 1 Equipment Requirements
- Continuous-mix design only. No storage of manufactured explosive.
- Metering system accuracy ≤ ±1%.
- Positive displacement pumps for emulsion.
- Temperature and pressure gauges on mixing line.
- 2 Interlock Requirements
Interlocks must automatically stop mixing if:
- Static ground connection fails
- Overpressure occurs
- Flow rates exceed safe limits
- Fire alarm activates
- Door/compartment is accessed during mixing
- 3 Purging & Cleaning
- Mandatory purge system to clear lines after each loading cycle.
- Purge waste must be collected and not discharged at site.
- Material Compliance
- 1 ANFO
- AN prill must meet quality specifications (absorption, porosity, hardness).
- Fuel oil must comply with recognized standards (equivalent to ASTM D975).
- No contaminated or caked AN allowed.
- 2 Emulsion
- Emulsion matrix must be manufactured at a licensed facility.
- Gassing/sensitizing systems must be sealed, calibrated, and tamper-proof.
- Temperature-controlled storage required.
- Operational Compliance
- 1 At the Site
- MMU must be positioned in a controlled, secured area.
- No unauthorized persons allowed within 50 m.
- Minimum distances:
- 50 m from roads
- 100 m from buildings
- 30 m from overhead power lines
- 2 Weather Restrictions
- No mixing during lightning, heavy rain, or extreme temperatures without mitigation.
- 3 Supervision
- On-site manufacturing only under responsibility of:
- Licensed Shotfirer
- MMU Operator
- Safety Supervisor
- 4 Transport Restrictions
- MMU shall not move with mixed explosive onboard.
- Only raw materials may be transported.
- Personnel Compliance
- 1 Operator Qualification
- Certified MMU Operator training (recognized curriculum).
- Annual refresher training or after any major incident.
- Valid Dangerous Goods driver certification (where applicable).
- 2 Safety Training Personnel must be trained in:
- AN handling
- Emulsion matrix handling
- Emergency response
- Equipment operation
- Fire safety
- Documentation & Licensing Compliance
- 1 Required Technical Documentation
- Engineering drawings (mechanical, hydraulic, electrical).
- Structural stability certificate.
- Design certification by PE/Registered Engineer.
- Fire suppression and pressure vessel certification.
- Electrical conformity certificate.
- 2 Required Safety Documentation
- Risk Assessment
- MMU Operating SOP
- Emergency Response Plan
- Incident reporting SOP
- Spill Control Plan
- 3 Regulatory Documentation
- Vehicle registration
- Insurance coverage (vehicle + third party + operator)
- Operator certificates
- Company explosives license
- Inspection Compliance (NEPSA/DG)
- 1 Pre-Licensing Inspection Inspector must verify:
- Mechanical integrity
- Electrical safety
- Interlock functionality
- Fire suppression
- Grounding system
- 2 Annual Inspections Required for:
- Metering calibration
- Structural integrity
- Tank/compartment condition
- Pump & hose integrity
- 3 Surprise Inspections
- Compliance with SOPs
- Operator certification
- Documentation availability
- PPE
- No presence of mixed explosives during travel
- Emergency Compliance
MMU must carry:
- First aid kit
- Eye wash bottle
- Spill control material
- Fire extinguishers
- Communication device
Emergency Actions If malfunction:
- Stop mixing
- Secure area
- Move MMU away from personnel
- Notify site supervisor
- Report to NEPSA within 24 hours
Schedule XI
(National Explosives and Petroleum Safety Agency) NEPSA MMU COMPLIANCE CHECKLIST (Inspection Report)
(Form: MMU–IR–11)
Mobile Manufacturing Unit (MMU) – Compliance Checklist Purpose: Field inspection prior to approval/renewal
MMU ID / Registration:
Company Name: Explosives License Number Inspection Date:
Inspecting Officer:
A.DOCUMENTATION
Item Yes No Remarks
Valid Explosives
License (EL-01/EL-06) ☐ ☐
Engineering
drawings approved ☐ ☐
Design certification
by qualified ☐ ☐
engineer
SOPs & Emergency
Response Plan ☐ ☐
available
HIRA/Risk
Assessment ☐ ☐
submitted
Operator training
certificates verified ☐ ☐
Fire suppression &
pressure vessel ☐ ☐
certificates
Latest calibration ☐
Item Yes No Remarks
certificates (metering, pumps) ☐
B.PHYSICAL INSPECTION – STRUCTURE
Requirement Yes No Remarks
Segregated compartments (AN,
Emulsion, Fuel) ☐ ☐
Non-sparking materials ☐ ☐
Weatherproof / dust-proof
construction ☐ ☐
Chassis load rating appropriate ☐ ☐
All hatches/valves fully functional ☐ ☐
C.ELECTRICAL SAFETY
Requirement Yes No Remarks
ATEX / intrinsically safe
components ☐ ☐
Wiring properly shielded ☐ ☐
Working grounding &
bonding system ☐ ☐
Static straps functional ☐ ☐
D.FIRE SAFETY
Requirement Yes No Remarks
Automatic fire
suppression system ☐ ☐
2 x 9kg DCP
extinguishers available ☐ ☐
E.MIXING SYSTEM
Requirement Yes No Remarks
Continuous-mix system only ☐ ☐
Accurate metering (±1%) ☐ ☐
Pressure/temperature gauges
functional ☐ ☐
Interlocks operational ☐ ☐
Purge system functional ☐ ☐
F.OPERATIONAL SAFETY
Requirement Yes No Remarks
No detonators/boosters
in MMU ☐ ☐
PPE available for crew ☐ ☐
Spill control kit present ☐ ☐
First aid kit present ☐ ☐
Charging hose integrity
verified ☐ ☐
Inspection Officer's Recommendation:
- Approved ☐ Not Approved ☐
Conditional Approval
Signature (Inspecting Officer):
Date:
Schedule XII
PRE-QUALIFICATION FOR THE COMPANIES TO OBTAIN A LICENSE OF BLASTING COMPANY IN FORM EL-03A
Mandatory Prequalification Criteria:
1. Company Registration & Legal Status:
- Must be a registered company.
- Must provide certificate of incorporation and tax registration.
2. Experience in Mining Operations:
- Preferably 5 years of experience in commercial mining/ handling explosive.
- Provide details of experience in mining activity/ projects including location, scale, and duration.

3. Lease Area and Joint Venture facility
- “For the purposes of evaluation, preference shall be given to companies having substantial mining lease holdings or those that have entered into collaboration agreements with interested parties.”
- “An applicant shall be eligible to form a Joint Venture with existing license holders licensed under Form EL-02 or Form EL-03, subject to compliance with applicable laws and prior approval of the Chief Inspector of Explosives.”
4. Technical & Operational Capability:
- Must own or have access to mining machinery and equipment suitable for the scale of operations.
- Must have a qualified team including mining engineers and safety officers.
5. Financial Capacity:
- Demonstrate minimum net worth or equivalent financial resources.
- Provide audited financial statements for the last 3 years.
6. Regulatory Compliance:
- No history of legal violations related to mining, environment, or labor laws.
- Submit proof of environmental and safety compliance for past projects.
Submission Requirement:
- Only companies fulfilling all mandatory criteria will be shortlisted.
(3) The organogram of the blasting company shall be as follows:”
List of Explosive Materials
A
Acetylides of heavy metals.
Aluminum containing polymeric propellant.
Aluminum ophorite explosive.
Amatex.
Amatol.
Ammonal.
Ammonium nitrate explosive mixtures (cap sensitive).
* Ammonium nitrate explosive mixtures (non-cap sensitive).
Ammonium perchlorate having particle size less than 15 microns.
Ammonium perchlorate explosive mixtures (excluding ammonium perchlorate composite propellant (APCP)).
Ammonium picrate [picrate of ammonia, Explosive D].
Ammonium salt lattice with isomorphously substituted inorganic salts.
* ANFO [ammonium nitrate-fuel oil].
Aromatic nitro-compound explosive mixtures.
Azide explosives.
B
Baranol.
Baratol
BEAF [1, 2-bis (2, 2-difluoro-2-nitroacetoxyethane)].
Black powder.
Black powder based explosive mixtures.
* Blasting agents, nitro-carbo-nitrates, including non-cap sensitive slurry and water gel explosives.
Blasting caps.
Blasting gelatin.
Blasting powder.
BTNEC [bis (trinitroethyl) carbonate].
BTNEN [bis (trinitroethyl) nitramine].
BTTN [1,2,4 butanetriol trinitrate].
Bulk salutes. Butyl tetryl.
C
Calcium nitrate explosive mixture.
Cellulose hexanitrate explosive mixture.
Chlorate explosive mixtures.
Composition A and variations.
Composition B and variations.
Composition C and variations.
Copper acetylide.
Cyanuric triazide. Cyclonite [RDX].
Cyclotetramethylenetetranitramine [HMX].
Cyclotol.
Cyclotrimethylenetrinitramine [RDX].
D
DATB [diaminotrinitrobenzene].
DDNP [diazodinitrophenol].
DEGDN [diethyleneglycol dinitrate].
Detonating cord.
Detonators.
Dimethylol dimethyl methane dinitrate composition.
Dinitroethyleneurea.
Dinitroglycerine [glycerol dinitrate].
Dinitrophenol.
Dinitrophenolates.
Dinitrophenyl hydrazine.
Dinitroresorcinol.
Dinitrotoluene-sodium nitrate explosive mixtures.
DIPAM [dipicramide; diaminohexanitrobiphenyl].
Dipicryl sulfone.
Dipicrylamine.
Display fireworks.
DNPA [2,2-dinitropropyl acrylate].
DNPD [dinitropentano nitrile].
Dynamite.
E
EDDN [ethylene diamine dinitrate].
EDNA [ethylenedinitramine].
Ednatol.
EDNP [ethyl 4,4-dinitropentanoate].
EGDN [ethylene glycol dinitrate].
Erythritol tetranitrate explosives.
Esters of nitro-substituted alcohols.
Ethyl-tetryl.
Explosive conitrates.
Explosive gelatins.
Explosive liquids.
Explosive mixtures containing oxygenreleasing inorganic salts and hydrocarbons.
Explosive mixtures containing oxygenreleasing inorganic salts and nitro bodies.
Explosive mixtures containing oxygenreleasing inorganic salts and water insoluble fuels.10
Explosive mixtures containing oxygenreleasing inorganic salts and water soluble fuels.
Explosive mixtures containing sensitized nitromethane.
Explosive mixtures containing tetranitromethane (nitroform).
Explosive nitro compounds of aromatic hydrocarbons.
Explosive organic nitrate mixtures.
Explosive powders.
F
Flash powder.
Fulminate of mercury.
Fulminate of silver.
Fulminating gold.
Fulminating mercury.
Fulminating platinum.
Fulminating silver.
G
Gelatinized nitrocellulose.
Gem-dinitro aliphatic explosive mixtures.
Guanyl nitrosamino guanyl tetrazene.
Guanyl nitrosamino guanylidene hydrazine.
Guncotton.
H
Heavy metal azides.
Hexanite.
Hexanitrodiphenylamine.
Hexanitrostilbene.
Hexogen [RDX].
Hexogene or octogene and a nitrated Nmethylaniline.
Hexolites.
HMTD [hexamethylenetriperoxidediamine].
HMX [cyclo-1,3,5,7-tetramethylene 2,4,6,8-tetranitramine; Octogen].
Hydrazinium nitrate/hydrazine/aluminum explosive system.
Hydrazoic acid.
I
Igniter cord.
Igniters.
Initiating tube systems.
K
KDNBF [potassium dinitrobenzo-furoxane].
L
Lead azide.
Lead mannite.
Lead mononitroresorcinate.
Lead picrate.
Lead salts, explosive.
Lead styphnate [styphnate of lead, lead trinitroresorcinate].
Liquid nitrated polyol and trimethylolethane.
Liquid oxygen explosives.
M
Magnesium ophorite explosives.
Mannitol hexanitrate.
MDNP [methyl 4,4-dinitropentanoate].
MEAN [monoethanolamine nitrate].
Mercuric fulminate.
Mercury oxalate.
Mercury tartrate.
Metriol trinitrate.
P
Picric acid (manufactured as an explosive).
Picryl chloride.
Picryl fluoride.
PLX [95% nitromethane, 5% ethylenediamine].
Polynitro aliphatic compounds.
Polyolpolynitrate-nitrocellulose explosive gels.
Potassium chlorate and lead sulfocyanate explosive.
Potassium nitrate explosive mixtures.
Potassium nitroaminotetrazole.
Pyrotechnic compositions.
PYX [2,6-bis(picrylamino)] 3,5-dinitropyridine.
R
RDX [cyclonite, hexogen, T4, cyclo-1,3,5,-trimethylene-2,4,6,-trinitramine; hexahydro-1,3,5-trinitro-S-triazine].![]()
S
Safety fuse.
Salts of organic amino sulfonic acid explosive mixture.
Salutes (bulk).
Silver acetylide.
Silver azide.
Silver fulminate.
Silver oxalate explosive mixtures.
Silver styphnate.
Silver tartrate explosive mixtures.
Silver tetrazene.
Slurried explosive mixtures of water, inorganic oxidizing salt, gelling agent, fuel, and sensitizer (cap sensitive).
Smokeless powder.
Sodatol.
Sodium amatol.
Sodium azide explosive mixture.
Sodium dinitro-ortho-cresolate.
Sodium nitrate explosive mixtures.
Sodium nitrate-potassium nitrate explosive mixture.
Sodium picramate.
Special fireworks.
Squibs.
Styphnic acid explosives.
T
Tacot [tetranitro-2,3,5,6-dibenzo-1,3a,4,6a tetrazapentalene].
TATB [triaminotrinitrobenzene].
TATP [triacetonetriperoxide]. TEGDN [triethylene glycol dinitrate].
Tetranitrocarbazole.
Tetrazene [tetracene, tetrazine, 1(5-tetrazolyl)-4-guanyl tetrazene hydrate].
Tetrazole explosives.
Tetryl [2,4,6 tetranitro-N-methylaniline].
Tetrytol.
Thickened inorganic oxidizer salt slurried explosive mixture.
TMETN [trimethylolethane trinitrate].
TNEF [trinitroethyl formal].
TNEOC [trinitroethylorthocarbonate].
TNEOF [trinitroethylorthoformate].
TNT [trinitrotoluene, trotyl, trilite, triton].
Torpex.
Tridite.
Trimethylol ethyl methane trinitrate composition.
Trimethylolthane trinitrate-nitrocellulose.
Trimonite.
Trinitroanisole.
Trinitrobenzene.
Trinitrobenzoic acid.
Trinitrocresol.
Trinitro-meta-cresol.
Trinitronaphthalene.
Trinitrophenetol.
Trinitrophloroglucinol.
Trinitroresorcinol.
Tritonal.
U
Urea nitrate.
W
Water-bearing explosives having salts of oxidizing acids and nitrogen bases, sulfates, or sulfamates (cap sensitive).
Water-in-oil emulsion explosive compositions.
X
Xanthamonas hydrophilic colloid explosive mixture.”.
PDF